Align Tail Boom (Black)

Specs:
Tail boom x 2(Φ20xΦ21.5x625mm)
Tail control guide x 2
Rudder control rod(B) x 1(Φ2x657mm)
Boll link x 2

Many others have actually bought this thing in addition to the thing that you are presently checking out.

Torque Tube

Usage for T-REX 600/600 Nitro
550E DFC
***Does not fit 550L Dominator.

Includes
Torque tube x 1
Bearing MR148ZZ x 1(F8xF14x4mm)

This thing is regularly bought with the above pointed out thing.

M0.8 Torque Tube Front Drive Gear Set/34T

Usage for T-REX 600PRO/600EFL PRO/550E

Specifications:
600PRO Front drive gear assembly x 1
600PRO Short umbrella gear x 1
600PRO Long umbrella gear x 1

Often bought with the thing that you are presently checking out.

Torque Tube Rear Drive Gear Set

Usage for T-REX 550/600 class.

Specs:
Tail rotor shaft assembly x 1
Long umbrella gear x 1

This is a amazing addition to the thing presently being reviewed.

550FL Flybarless Rotor Head System H55H002XX

Suitable for T-REX 550L.
Need to with 550 Main Shaft Set(H55H003XXW)、600PRO Metal Main Rotor Holder(H60204)、600 Feathering Shaft(H60H001XXW) or (H60006)

Specs:
600FL Main Rotor Housing x 1
Feathering Shaft Sleeve x 1
600DFC Head Damper x 2
600 Head Damper x 2
600FL Main Blade Grip Arm x 2
600FL Linkage rod x 2
FL Metal Control Arm x 2
Collar x 2
FMR52ZZ Bearings x 4(Φ2xΦ5x2.3mm)
683ZZ Bearings x 4(Φ3xΦ7x3mm)
CCPM Metal Swashplate x 1
700 Elevator ball link x 10
600PRO Elevator ball link x 1
Linkage rod holder x 10
Linkage rod head x 2
5 Linkage ball B ? 2(M3x4)
700N Linkage ball B ? 2(M3x4)
Socket screw x 2(M4x8mm)
Socket screw x 4(M2x5mm)
Socket screw x 2(M3x16mm)
Socket button head collar screw x 1(M4x24mm)
Socket button head collar screw x 4(M3x6mm)
Washer x 2
M4 nut x 1

The listed below thing also pairs truly well with the thing being reviewed.

600 Carbon Fiber Tail Boom-Matte Black H60T003XX

Usage for T-REX 550/600/600 Nitro.
T-REX 550 Must with Tail Boom Brace(H60052A)、
Torque Tube(H60119-1)、
600 Carbon Tail Control Rod AssemblyH60221)

Specs:
600 carbon fiber tail boom x 1(Φ20.3xΦ21.5x625mm)

Many others have actually bought this thing in addition to the thing that you are presently checking out.

Torque Tube Bearing Holder Set

Usage for T-REX 550E/600E/600Nitor /700E /700Nitro
Specs:
Torque tube bearing holder x 2(Φ14xΦ20.7x13mm)
Bearing MR148ZZ x 4(Φ8xΦ14x4mm)
EZO Made in Japan

Many others have actually bought this thing in addition to the thing that you are presently checking out.

New Landing Skid

This is an upgrade landing skid set for the Align 600 and 600N line of helicopters. More rigid than the standard landing gear these have a decreased height for a lower center of mass more suitable for 3D flying.

Plan includes:

2 - Black landing skids around 39g each.




Often bought with the thing that you are presently checking out.

M0.8 Torque Tube Front Drive Gear Set (34T)

This is an Align M0.8, 34 Tooth Torque Tube Front Drive Gear Set, and is intended for usage with the Align T-Rex 550 V2 and 600 Pro helicopters.
Includes:
(1) Modulus: 0.8 Front drive gear assembly (4x4.5x51mm)
(1) Front umbrella gear (20T) (21.2x33.6mm)
(1) Tail umbrella gear (20T) (21.2x12.5mm)

Note: In order to utilize this torque tube drive gear set on a T-REX 550, the helicopter must be geared up with the inclined gear setup. To determine if your helicopter uses inclined gears or straight-cut gears, observe the primary drive gear which will either have inclined or straight-cut teeth.