Align 23 Tail Blade-White

Appropriate for T-REX 150 DFC.

Guidelines:
Tail Blade x 4
Length:43 mm
Weight:Approximate 0.23g/single

The listed below product also sets actually well with the product being reviewed.

150 Main Shaft

Usage for T-REX 150.

Specs:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

This product is often acquired with the above pointed out product.

78T Main Drive Gear

Usage for T-REX 100S/100X/150.

Specs:
Main Drive Gear(78T) x 2

This product is often acquired with the above pointed out product.

T-REX 150 DFC Super Combo W/Metal Swash & Carry Case

Align's tiniest and most petite 3D helicopter T-Rex 150 DFC, brings the same superior pedigree and design principle that stemmed from the effective T-Rex line of helicopters. Featuring strong power, superior flight control stability, and geared up with high end elements, far surpassing other helicopters currently on the market.

Twin brushless motor design, coupled with 2s 7.4v 250mah battery, creating power that will surpass all your expectations. Metal DFC primary rotor head assembly including high end visual and superior flight performance; in addition, an incorporated control system with specially enhanced 3-axis gyro, receiver, electronic speed controller, and 4g servos. All these make it possible for the T-Rex 150 DFC to posses the same stability, superior dexterity, and tail holding efficiency as the bigger helicopters.

T-Rex 150 features built in Futaba S-FHSS 2.4Ghz system, and support using Spektrum DSM2/DSMX / JR DSM2/DSMJ/DMSS satellite receivers. To obtain the T-Rex 150 airborne, all thats needed is inputting of criteria listed in handbook into your transmitter, and binding of your transmitter.

Miniature size, control precision that resembles the bigger helicopters, enables you to delight in flying inside a confined space. Novices can even enjoy this with ease by simply refusing the speed dial. The ingenious advancement T-Rex 150 will bring you a brand-new measurement of flying enjoyment.

Specification:
Length: 255mm
Height: 80mm
Main Blade Length: 120mm
Main Rotor Size: 271mm
Tail Rotor Size: 45mm
Motor Pinion Gear: 10T
Main Drive Gear: 78T
Drive Gear Ratio: 1:7.8
Weight (w/o Battery): 53g

Accessories:
T-REX 150 DFC set x 1
Main Blades x 2 set
Tail Blades x 1 set
150M Main Motor x 1
150M Tail Motor x 1
DS155 Digital Servo x 1
DS150 Digital Servo x 2
Going Plug x 1
Remote Extension x 1
7.4V Li-Po 250mAh Li-Polymer Battery x 2
150 Carry Box-Black x 1(292x160x69mm)
1.3mm Hexagon screw driver(Blue/8.2g) x 2
0.9mm Hexagon screw driver(Red/8g) x 1
Parts box E x 1(78.5x60.9x21mm)
Parts box A x 1(52x40x12mm)
CH150X Li-Po Battery charger x 1

Radio transmitter and electronic equipment required for assembly:
1.ALIGN T6 or Futaba S-FHSS 2.4G Transmitter or JR DSM2/DSMJ/DMSS、Spektrum DSM2/DSMX 2.4GHz Transmitter