Align 23 Tail Blade-White

Appropriate for T-REX 150 DFC.

Guidelines:
Tail Blade x 4
Length:43 mm
Weight:Approximate 0.23g/single

The listed below thing additionally pairs really well with the thing being discussed.

150 Main Shaft

Use for T-REX 150.

Specs:
Main Shaft x 2(Φ1.6xΦ3x45.8mm)
Socket button head screw x 2(M2x4mm)

This thing is frequently purchased with the above stated thing.

78T Main Drive Gear

Use for T-REX 100S/100X/150.

Specs:
Main Drive Gear(78T) x 2

This thing is frequently purchased with the above stated thing.

T-REX 150 DFC Super Combo W/Metal Swash & Carry Case

Align's tiniest and most small 3D helicopter T-Rex 150 DFC, carries the same exceptional pedigree and design principle that stemmed from the effective T-Rex line of helicopters. Featuring strong power, exceptional flight control stability, and geared up with luxury parts, far going beyond any other helicopters currently on the market.

Twin brushless motor design, paired with 2s 7.4v 250mah battery, producing power that will surpass all your expectations. Metal DFC primary rotor head assembly including luxury visual and exceptional flight performance; in addition, an integrated control system with specially enhanced 3-axis gyro, receiver, electronic speed controller, and 4g servos. All of these allow the T-Rex 150 DFC to posses the same stability, exceptional agility, and tail holding efficiency as the bigger helicopters.

T-Rex 150 features integrated in Futaba S-FHSS 2.4Ghz system, and support using Spektrum DSM2/DSMX / JR DSM2/DSMJ/DMSS satellite receivers. To obtain the T-Rex 150 airborne, all thats required is inputting of criteria noted in handbook into your transmitter, and binding of your transmitter.

Miniature size, control accuracy that looks like the bigger helicopters, allows you to take pleasure in flying inside a restricted area. Beginners can even enjoy this with ease by simply declining the speed dial. The ingenious advancement T-Rex 150 will bring you a new measurement of flying enjoyment.

Specification:
Length: 255mm
Height: 80mm
Main Blade Length: 120mm
Main Rotor Size: 271mm
Tail Rotor Size: 45mm
Motor Pinion Gear: 10T
Main Drive Gear: 78T
Drive Gear Ratio: 1:7.8
Weight (w/o Battery): 53g

Accessories:
T-REX 150 DFC set x 1
Main Blades x 2 set
Tail Blades x 1 set
150M Main Motor x 1
150M Tail Motor x 1
DS155 Digital Servo x 1
DS150 Digital Servo x 2
Going Plug x 1
Remote Extension x 1
7.4V Li-Po 250mAh Li-Polymer Battery x 2
150 Carry Box-Black x 1(292x160x69mm)
1.3mm Hexagon screw chauffeur(Blue/8.2g) x 2
0.9mm Hexagon screw chauffeur(Red/8g) x 1
Parts box E x 1(78.5x60.9x21mm)
Parts box A x 1(52x40x12mm)
CH150X Li-Po Charger x 1

Radio transmitter and electronic devices required for assembly:
1.ALIGN T6 or Futaba S-FHSS 2.4G Transmitter or JR DSM2/DSMJ/DMSS、Spektrum DSM2/DSMX 2.4GHz Transmitter