Align T-REX700E PRO DFC Super Combo

Just 1 Left! When they are gone, they're gone!

This is the Align T-REX 700E PRO DFC Flybarless Super Combination Kit. This unbelievable package consists of not only the T-REX 700E DFC PRO Kit, but likewise a 3K Carbon Fiber Tail Boom and an Aluminum Tail Boom, an updated 700 3G Carbon Fiber Blade Set and an updated 105mm 3K Carbon Fiber Tail Blade Set. In addition, an Align 520kV 800MX Brushless Motor, 3GX Programmable Flybarless System, three DS615 Cyclic Servos, one DS655 Tail Servo, with a Castle Creations ICE2 HV 120 brushless ESC and a 6A External BEC included to round off this remarkable extremely combination.

The T-REX 700E PRO DFC design is geared up with 700 3G carbon fiber primary blades that have actually been established for severe 3D flight, delivering agility and stability, along with an updated paint scheme. The increased blade rigidity enhances anti-torsion qualities throughout flight, and the upgraded airfoil minimizes turbulence near the blade tip, reducing blade noise and power loss. The included 800MX motor is an effective, yet remarkable source of power that provides outstanding torque, low present draw and decreased operating temperature levels. In addition an updated fiberglass canopy with remarkable aerodynamic qualities helps to reduce wind resistance and utilizes a 4 point anti-vibration installing system for quick setup and elimination. The Align T-REX 700E PRO DFC Flybarless Super Combination consists of top notch equipment for demanding helicopter enthusiasts, and will surprise even the most avid pilots.

700E PRO DFC Functions:

Geared up with the low CG DFC rotor head, shows thrilling 3D efficiency and unimaginable flight speed
800MX motor includes high efficiency, remarkable power, outstanding torque, low present draw and low temperature level; it can keeping consistent torque and head speed through continuous 3D maneuvers
Upgraded design swash anti-rotation guide with ingrained anti-wear material, effectively decrease the wear in between swashplate long ball and guide
Makes use of composite carbon material integration strategy on frame structure for CCPM servos. Upgraded CCPM direct servo linkage
Geared up with upgraded high strength CNC M1 helical primary gear and tail drive bevel gear assembly, featuring enhanced general gear structure and increased gear thickness, effectively enhances gear's anti torsion ability to prevent gear from warping under severe power, reducing gear wear and power loss
Geared up with redesigned 700 3G carbon fiber primary blades designed specifically for severe 3D flights, featuring agility and stability, and upgraded graphics paint scheme
High quality gearbox design, integrated with upgraded double point mounted tail pitch control assembly to decrease slop and boost rudder control precision
Upgraded tail blade designed to sustain optimum tail locking efficiency under high head speed and severe flight conditions
Upgraded design wrap around airbrushed fiberglass canopy, with aerodynamic type to reduce wind resistance. 4-point anti-vibration installs for quick set up and elimination

3GX Functions:

Upgraded 3GX represents the next generation of multi function flybarless systems. The significantly improved efficiency will create an instant influence on any enthusiasts.
The 3GX is currently the smallest and lightest flybarless system on the market and includes two ports to directly connect Spektrum and JR satellite receivers, in addition to full assistance of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup procedure, the 3GX can be setup simply in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system currently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically detailed guidelines utilizing the computer setup software application directs the user through a step by step setup procedure, enabling quick setups without omitting any actions.
With the quickly to be launched Bluetooth connectivity set, the 3GX can be programmed wirelessly from a PC. Ultimately there will likewise be smartphone apps enabling live changes to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is needed, reducing electronic clutter and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, enabling pilots to accomplish the most optimum setup for their helicopter without the guesswork.
Three levels of flight mode are readily available to offer the perfect feel for novice and advanced pilots.
Customized criteria have actually been established to permit pilots to fine tune numerous swashplate and rudder settings and a settings export function enables custom settings to be shared among pals.
The 3GX includes the greatest spec gyroscope sensing units, enabling it to be utilized in the harshest conditions. The double axis plus rudder sensing unit significantly enhances swashplate and rudder correction precision and will be felt when hovering, along with throughout aerobatic routines.
Suitable for 200 to 700 class helicopters, glow engine or electrical powered.
The vibration resistant qualities appear even when mounted with faster double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, in addition to completely re-written firmware. The result is a dramatic enhancement in stability that rivals a flybarred helicopter, while offering explosive agility.
With a built in pirouette compensation function, the 3GX is able to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly performed with precision.
Rudder control is similar to the high end GP-780 gyro in that the rudder sensitivity is optimized for the helicopter's rudder reaction qualities, enabling consistent rudder feel even under high speed conditions. This outstanding control feel will permit pilots of all skill levels to experience the perfect integration in between the 3GX and the helicopter.
Extra peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system uses a total of 10 sensing units, guarantee positioning of the helicopter with remarkable precision and offering the supreme option for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type recognition

700E PRO DFC Specifications:
Length: 1350mm
Height: 360mm
Width: 208mm
Main Blade Length: 700mm
Main Rotor Size: 1582mm
Tail Rotor Size: 281mm
Motor Drive Gear: 12T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 1:9.33:4.73
Weight (With Motor): 3310g

3GX Specifications:
Operating Temperature: -10~60 degree
X and Y axis Operating Angle Range: -300~+300 degree
Z axis Operating Angle Range: -600~+600 degree
Size: 36.5x25.2x15.6mm Size
Weight: 11g
Maximum working voltage: 8.5V

Consists of:

(1) T-REX 700E PRO DFC Kit
(1) 3K Carbon Fiber Tail Boom
(1) 790 3G Carbon Fiber Blade Set
(1) 800MX Brushless Motor (520kV)
(1) 3GX Flybarless System
(3) DS615 Servo
(1) DS655 Servo
(1) Aluminum Tail Boom
(1) Castle ICE2 HV 120 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set

Had to Total:

7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) 2S Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge