Align T-REX700E PRO DFC Super Combo

Just 1 Left! When they are gone, they're gone!

This is the Align T-REX 700E PRO DFC Flybarless Super Combination Kit. This amazing bundle includes not only the T-REX 700E DFC PRO Kit, however likewise a 3K Carbon Fiber Tail Boom and an Aluminum Tail Boom, an upgraded 700 3G Carbon Fiber Blade Set and an upgraded 105mm 3K Carbon Fiber Tail Blade Set. In addition, an Align 520kV 800MX Brushless Motor, 3GX Programmable Flybarless System, 3 DS615 Cyclic Servos, one DS655 Tail Servo, with a Castle Creations ICE2 HV 120 brushless ESC and a 6A External BEC included to round off this outstanding extremely combo.

The T-REX 700E PRO DFC design is geared up with 700 3G carbon fiber primary blades that have been developed for extreme 3D flight, delivering dexterity and stability, as well as an upgraded paint plan. The increased blade rigidity improves anti-torsion attributes throughout flight, and the updated airfoil reduces turbulence near the blade suggestion, lowering blade noise and power loss. The included 800MX motor is an effective, yet exceptional power source that provides exceptional torque, low present draw and decreased operating temperatures. In addition an upgraded fiberglass canopy with exceptional aerodynamic qualities helps to lower wind resistance and uses a 4 point anti-vibration installing system for quick installation and elimination. The Align T-REX 700E PRO DFC Flybarless Super Combination includes top notch equipment for demanding helicopter lovers, and will surprise even the most devoted pilots.

700E PRO DFC Functions:

Equipped with the low CG DFC rotor head, shows thrilling 3D efficiency and unthinkable flight speed
800MX motor features high performance, exceptional power, exceptional torque, low present draw and low temperature; it's capable of keeping consistent torque and head speed through constant 3D maneuvers
Revamped design swash anti-rotation guide with embedded anti-wear product, effectively minimize the wear between swashplate long ball and guide
Makes use of composite carbon product combination technique on frame structure for CCPM servos. Revamped CCPM direct servo linkage
Equipped with updated high strength CNC M1 helical primary gear and tail drive bevel gear assembly, featuring enhanced general gear structure and increased gear thickness, effectively improves gear's anti torsion capability to avoid gear from deforming under extreme power, lowering gear wear and power loss
Equipped with upgraded 700 3G carbon fiber primary blades designed particularly for extreme 3D flights, featuring dexterity and stability, and updated graphics paint plan
High quality gearbox design, combined with updated double point mounted tail pitch control assembly to minimize slop and increase rudder control precision
Revamped tail blade designed to sustain ideal tail locking efficiency under high head speed and extreme flight conditions
Revamped design wrap around airbrushed fiberglass canopy, with aerodynamic kind to lower wind resistance. 4-point anti-vibration installs for quick install and elimination

3GX Functions:

Revamped 3GX represents the next generation of multi function flybarless systems. The drastically improved efficiency will create an instant effect on any lovers.
The 3GX is presently the smallest and lightest flybarless system on the marketplace and features two ports to directly link Spektrum and JR satellite receivers, together with complete support of Futaba's S-BUS system.
Using the 3G FL760 manual setup procedure, the 3GX can be setup merely in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system presently on the marketplace consisting of 90, 120, 135, and 140 degree swashplates.
Graphically detailed instructions using the computer setup software directs the user through an action by step setup procedure, enabling quick setups without omitting any steps.
With the quickly to be launched Bluetooth connectivity set, the 3GX can be programmed wirelessly from a PC. Eventually there will likewise be smartphone apps allowing live adjustments to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is required, lowering electronic mess and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, allowing pilots to accomplish the most ideal setup for their helicopter without the guesswork.
Three levels of flight mode are offered to offer the best feel for beginner and advanced pilots.
Customized specifications have been developed to permit pilots to fine tune various swashplate and rudder settings and a settings export feature enables customized settings to be shared amongst buddies.
The 3GX features the greatest spec gyroscope sensing units, allowing it to be used in the harshest conditions. The double axis plus rudder sensing unit drastically improves swashplate and rudder correction precision and will be felt when hovering, as well as throughout aerobatic routines.
Appropriate for 200 to 700 class helicopters, glow engine or electric powered.
The vibration resistant attributes are evident even when mounted with harder double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, together with entirely re-written firmware. The outcome is a significant improvement in stability that equals a flybarred helicopter, while supplying explosive dexterity.
With a built in pirouette compensation function, the 3GX has the ability to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with precision.
Rudder control resembles the high end GP-780 gyro in that the rudder level of sensitivity is optimized for the helicopter's rudder reaction attributes, allowing consistent rudder feel even under high speed conditions. This exceptional control feel will permit pilots of all ability levels to experience the best combination between the 3GX and the helicopter.
Added peripherals prepared for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system makes use of a total of 10 sensing units, guarantee positioning of the helicopter with exceptional precision and supplying the ultimate solution for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Support approximately 6 servos
Automatic servo type recognition

700E PRO DFC Specifications:
Length: 1350mm
Height: 360mm
Width: 208mm
Main Blade Length: 700mm
Main Rotor Diameter: 1582mm
Tail Rotor Diameter: 281mm
Motor Drive Gear: 12T
Main Drive Gear: 112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 1:9.33:4.73
Weight (With Motor): 3310g

3GX Specifications:
Operating Temperature level: -10~60 degree
X and Y axis Operating Angle Range: -300~+300 degree
Z axis Operating Angle Range: -600~+600 degree
Size: 36.5x25.2x15.6mm Size
Weight: 11g
Maximum working voltage: 8.5V

Consists of:

(1) T-REX 700E PRO DFC Kit
(1) 3K Carbon Fiber Tail Boom
(1) 790 3G Carbon Fiber Blade Set
(1) 800MX Brushless Motor (520kV)
(1) 3GX Flybarless System
(3) DS615 Servo
(1) DS655 Servo
(1) Aluminum Tail Boom
(1) Castle ICE2 HV 120 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set

Needed to Complete:

7-channel or more helicopter radio system
(2) 6S Li-Po 4500 ~ 5200mAh
(1) TWO Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge