Align T-REX700E PRO DFC HV Super Combo

Guideline(3GX Programmable Flybarless System) :
Brand name brand-new redesigned 3GX represents a brand-new generation of multi function flybarless system. The significantly improved efficiency will produce instant influence on any enthusiasts.
3GX is currently the tiniest and lightest flybarless system on the marketplace. 2 ports to straight connect Spektrum and JR satellite receivers, together with full support of Futaba's S-BUS system.
Based upon the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through an easy procedure. In addition, the 3GX can support all of the CCPM swashplate system currently on the marketplace including 90, 120, 135, and 140 degrees swashplates.
Graphical illustrated guideline on the computer setup software application directs the user through an action by action setup procedure, permitting fast setups without omitting any actions.
Support Bluetooth connectivity. With the soon to be launched Bluetooth connectivity package, 3GX can be configured wirelessly from a PC. Ultimately there will likewise be smartphone apps permitting live modifications to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is needed to lower electronic wire mess.
Custom specifications have actually been opened up in 3GX to enable pilots to tweak many settings for swashplate and rudder. Settings export feature enables custom settings to be shared amongst buddies.
3GX utilizes brand brand-new gyroscope sensors of the highest requirements when compared to other flybarless systems currently on the marketplace, permitting it to be used under harsh conditions. Double axis plus rudder sensor significantly enhances swashplate and rudder correction accuracy compared to last generation 3G. This is clearly visible in stable hover as well as highly aerobatic routines.
Suitable for helicopter of all class from 250 to 800, glow engine or electrical powered. The exceptional vibration resistant attribute is evident even when installed with harder double sided installing tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, together with a totally re-written firmware. The result is a dramatic stability improvement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive dexterity.
With built in pirouette settlement function, 3GX is able to support the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting turns type of maneuvers are easily accomplished with accuracy.
3GX's rudder enables consistent rudder feel even under high speed conditions. This exceptional control feel will enable pilot of all skill levels to experience the ideal integration in between 3GX and helicopter.
Support with APS gyro system and raise more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self support, hold position as well as elevation, as well as autonomous way point flights as well as return home.

Requirements(T-REX 700E DFC) :
1. Equipped with the low CG DFC rotor head, successfully lower wind resistance throughout flight, offering the most direct and accurate control feel back to the pilot, and exhibits exciting 3D efficiency and unthinkable flight speed.
2.Brand-new style swash anti-rotation guide with ingrained anti-wear material, successfully lessen the wear in between swashplate long ball and guide.
3.Equipped with brand brand-new 700 3G carbonfiber primary blades designed specifically for severe 3D flights, featuringagility and stability, and brand-new graphics paint plan. The increased blade rigidness enhances antitorsion characteristic throughout flight, and the brand-new airfoil lessens turbulencenear the blade pointer, decreasing blade noise and power loss.
4.Brand name brand-new tailblade designed to sustain ideal tail locking efficiency under high headspeed and severe flight conditions.
5. Brand name brand-new CCPM direct servo linkage style to eliminate the weight of double push-pull linkage system, allowing faster and more accurate control response.
6. Integrated servo installs on the primary shaft bearing obstructs, permitting cyclic servos to be installed straight onto the bearing obstructs, which together with the composite material frame plates, producing a tidy and uncluttered look.
7. Utilizes composite carbon material integration method on frame structure for ease of upkeep and high rigidness. Increased front opening area to allow for simpler battery setup.
8. Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring filled locking system, permitting fast battery access as well as battery defense.
9. Top installed motor base bringing the motor's center of mass more detailed to turning disc, improving 3D dexterity and permitting blade drafts to cool the motor successfully.
10. Motor install consists of third bearing block to offer motor shaft support, successfully lower torque caused shifts, and lessen gear striping issue.
11. Utilizes high specification MOD1 112T CNC helical primary gear and MOD 1 tail drive helical gear to increase gear mesh area, and lessen gear noise throughout flight.
12. Top installed ESC platform to benefit from primary blades air flow for reliable cooling.
13. New lightweight H-shaped electrical device retention system for defense, as well as ergonomically proper style to simplify operation .
14.800MX features high efficiency, exceptional power, exceptional torque, low current draw and low temperature level; it?s capable of preserving consistent torque and head speed through constant 3D maneuvers.
15. Brand name brand-new transmission with more structured style likewise permits simpler disassembly.
16. High quality brand-new tail transmission style, integrated with brand-new double point installed tail pitch control assembly to lessen slops and increase rudder control accuracy.
17. High torque rated one way bearing base.
18. High accuracy bearing supported double push point rudder control style.
19. High speed rated thrust bearings included into tail blade grips.
20. Equipped with third bearing primary shaft support to increase rigidness, satisfying the requirements of severe 3D maneuvers.
21. New lightweight landing gears.
22.Brand-new style wrap around airbrushed fiberglasscanopy, with aerodynamic type to lower wind resistance. 4 point anti-vibration installs for quickinstall and removal.
23. New CNC aluminum alloy installing plate.

Users should have a particular principle of security to run the R/C helicopters.
Make sure to check out and comply with associated safety notes of user's manual before flying.

Requirements(3GX Programmable Flybarless System) :
Operating Temperature level:-10~60 degree
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size:36.5x25.2x15.6 mm Size
Weight11g Weight
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Replaces original factory receiver)
Futaba S.BUS system support
Integrated in governor function
Optimum working voltage:8.5V
Suitable with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without making use of a PC
Suitable with 2 to 5 blades rotor heads
Support approximately 6 servos
Automatic servo type recognization

Requirements(T-REX 700E DFC) :
Length: 1350mm
Height: 360mm
Width: 208mm
Main Blade Length: 700mm
Main Rotor Size: 1582mm
Tail Rotor Size: 281mm
Motor Drive Equipment:12T
Main Drive Equipment:112T
Autorotation Tail Own Equipment: 104T
Tail Own Equipment: 22T
Drive Equipment Ratio: 1:9.33:4.37
Weight(With Motor): 3310g

Accessories:
T-REX 700E PRO DFC Packages Set x 1set
3GX Flybarless system x 1
700 3G Carbon Fiber Blades x 1set
BL700H High Voltage Brushless Servo x 3
BL750H High Voltage Brushless Servo x 1
Aluminum Tail Boom x 1
3K Carbon Fiber Tail Boom x 1
800MX Brushless Motor(520KV) x 1
Castle ICE2 HV 120 Brushless ESC x 1
105mm 3K Carbon Fiber Tail Blades x 1set Radio transmitter and electronic equipment needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 4500 ~ 5200mAh x 2
TWO Li-Po 1900 ~ 2300mAh x 1
Dial Pitch Gauge