Align T-REX700E PRO DFC HV Super Combo

Guideline(3GX Programmable Flybarless System) :
Brand new redesigned 3GX represents a brand-new generation of multi function flybarless system. The significantly enhanced efficiency will develop immediate impact on any enthusiasts.
3GX is currently the smallest and lightest flybarless system on the marketplace. Two ports to straight link Spektrum and JR satellite receivers, in addition to full support of Futaba's S-BUS system.
Based upon the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through a basic procedure. In addition, the 3GX can support all of the CCPM swashplate system currently on the marketplace including 90, 120, 135, and 140 degrees swashplates.
Graphical illustrated guideline on the computer system setup software directs the user through a step by step setup procedure, allowing for quick setups without leaving out any actions.
Assistance Bluetooth connection. With the soon to be released Bluetooth connection package, 3GX can be configured wirelessly from a PC. Ultimately there will likewise be smartphone apps enabling live adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is had to decrease electronic wire clutters.
Customized criteria have actually been opened up in 3GX to enable pilots to fine tune numerous settings for swashplate and rudder. Settings export feature allows custom-made settings to be shared among pals.
3GX utilizes brand new gyroscope sensors of the highest specifications when compared with other flybarless systems currently on the marketplace, enabling it to be used under harsh conditions. Dual axis plus rudder sensing unit significantly improves swashplate and rudder correction precision compared with last generation 3G. This is clearly visible in steady hover along with highly aerobatic regimens.
Ideal for helicopter of all class from 250 to 800, glow engine or electric powered. The remarkable vibration resistant quality is evident even when mounted with harder double sided mounting tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, in addition to an entirely re-written firmware. The result is a dramatic stability enhancement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive dexterity.
With built in pirouette payment function, 3GX is able to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flips kind of maneuvers are quickly accomplished with precision.
3GX's rudder allows constant rudder feel even under high speed conditions. This excellent control feel will enable pilot of all ability levels to experience the best combination between 3GX and helicopter.
Assistance with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position along with elevation, as well as self-governing way point flights along with return home.

Specification(T-REX 700E DFC) :
1. Geared up with the low CG DFC rotor head, effectively decrease wind resistance throughout flight, supplying the most direct and accurate control feel back to the pilot, and shows exhilarating 3D efficiency and unimaginable flight speed.
2.Brand-new design swash anti-rotation guide with ingrained anti-wear product, effectively decrease the wear between swashplate long ball and guide.
3.Geared up with brand new 700 3G carbonfiber primary blades developed particularly for extreme 3D flights, featuringagility and stability, and new graphics paint scheme. The increased blade rigidity improves antitorsion characteristic throughout flight, and the new airfoil reduces turbulencenear the blade tip, minimizing blade noise and power loss.
4.Brand new tailblade developed to sustain optimal tail locking efficiency under high headspeed and extreme flight conditions.
5. Brand new CCPM direct servo linkage style to remove the weight of double push-pull linkage system, making it possible for faster and more accurate control reaction.
6. Integrated servo installs on the primary shaft bearing obstructs, enabling cyclic servos to be mounted straight onto the bearing obstructs, which together with the composite product frame plates, developing a tidy and uncluttered appearance.
7. Makes use of composite carbon product combination strategy on frame structure for ease of upkeep and high rigidity. Increased front opening location to permit easier battery installation.
8. Ingenious sliding battery tray rails imbedded into the 3K side frames, with patented spring packed latching mechanism, allowing for quick battery gain access to along with battery defense.
9. Leading mounted motor base bringing the motor's center of mass better to turning disc, enhancing 3D dexterity and enabling blade drafts to cool the motor effectively.
10. Motor install includes third bearing block to provide motor shaft support, effectively decrease torque induced shifts, and decrease equipment striping problem.
11. Makes use of high spec MOD1 112T CNC helical primary equipment and MOD 1 tail drive helical equipment to increase equipment mesh location, and decrease equipment noise throughout flight.
12. Leading mounted ESC platform to make the most of primary blades airflow for reliable cooling.
13. New light-weight H-shaped electric gadget retention system for defense, along with ergonomically correct style to streamline operation .
14.800MX includes high performance, remarkable power, excellent torque, low existing draw and low temperature level; it?s efficient in preserving constant torque and head speed through continuous 3D maneuvers.
15. Brand new gear box with more streamlined style likewise permits easier disassembly.
16. High quality new tail gearbox style, combined with new dual point mounted tail pitch control assembly to decrease slops and increase rudder control precision.
17. High torque ranked one way bearing base.
18. High precision bearing supported dual push point rudder control style.
19. High speed ranked thrust bearings included into tail blade grips.
20. Geared up with third bearing primary shaft support to increase rigidity, fulfilling the needs of extreme 3D maneuvers.
21. New light-weight landing gears.
22.Brand-new design wrap around airbrushed fiberglasscanopy, with aerodynamic form to decrease wind resistance. 4 point anti-vibration installs for quickinstall and elimination.
23. New CNC aluminum alloy mounting plate.

Users should have a specific idea of security to run the R/C helicopters.
Be sure to read and abide by associated security notes of user's manual before flying.

Specification(3GX Programmable Flybarless System) :
Running Temperature:-10~60 degree
X and Y axis Operating Angle Variety:-300~+300 degree
Z axis Operating Angle Variety:-600~+600 degree
Size:36.5x25.2x15.6 mm Size
Weight11g Weight
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Replaces initial factory receiver)
Futaba S.BUS system support
Integrated in guv function
Maximum working voltage:8.5V
Suitable with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without making use of a PC
Suitable with 2 to 5 blades rotor heads
Assistance as much as 6 servos
Automatic servo type recognization

Specification(T-REX 700E DFC) :
Length: 1350mm
Height: 360mm
Width: 208mm
Main Blade Length: 700mm
Main Rotor Size: 1582mm
Tail Rotor Size: 281mm
Motor Drive Equipment:12T
Main Drive Equipment:112T
Autorotation Tail Drive Equipment: 104T
Tail Drive Equipment: 22T
Drive Equipment Ratio: 1:9.33:4.37
Weight(With Motor): 3310g

Accessories:
T-REX 700E PRO DFC Kits Set x 1set
3GX Flybarless system x 1
700 3G Carbon Fiber Blades x 1set
BL700H High Voltage Brushless Servo x 3
BL750H High Voltage Brushless Servo x 1
Aluminum Tail Boom x 1
3K Carbon Fiber Tail Boom x 1
800MX Brushless Motor(520KV) x 1
Castle ICE2 HV 120 Brushless ESC x 1
105mm 3K Carbon Fiber Tail Blades x 1set Radio transmitter and electronic devices required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 4500 ~ 5200mAh x 2
TWO Li-Po 1900 ~ 2300mAh x 1
Dial Pitch Gauge