Align T-REX700E F3C V3 Super Combo

Spec(GP900 Head lock gyro combo):
1.Utilizes MEMS(Micro Electro Mechanical Systems) micro electronic sensing units which are little, extremely dependable, and extremely stable.
2.16bit high processing speed CPU is utilized for ultra high resolution, resulting in greater rudder accuracy than formerly possible, even on modern-day high powered helicopters.
3.Supports Spektrum and JR satellites, conventional receiver not required.
4.Assistance Futabs S-BUS system.
5.Assistance both digital and analog servos.
6.Assistance both wide and narrow band receivers.
7.Integrated RCE-G600 speed governor function, therefore GP900 can provide speed governor function without additional electronics.
8.Suitable for all 200 to 700 size radiance engine or electric helicopters, with greater vibration resistance than any other systems. Superior efficiency is possible even with harder mounting foam tapes.
9.Assistance specification setting through PC interface, in addition to firmware updates.
10.Anti-torque compensation. Optimal tail locking possible no matter if gyro is mounted upright or inverted.

Specification(T-REX 700E F3C V3):
1.Brand name brand-new all metal high accuracy and high rigidness primary blade assembly, offering 3 positive/negative deltas andnumerous Bell & Hiller mixing ratios.
2.Ingenious sliding battery tray rails imbedded into the 3K side frames, with trademarked spring filled latching mechanism, permitting fast battery access in addition to battery protection.
3.Precision CNC machined aluminum pieces including elevator servo mount, rudder servo mount, rudder control bell crank arm, vertical and horizontal fin mounts.
4.Top mounted motor base enabling blade drafts to cool the motor successfully.
5.Recently developed one piece stainless steel primary gear center to enhance rotational stability.
6.Utilizes highest spec CNC modue-1 helical primary gear, with highest load tolerance and lowest noise.
7.Motor mount includes third bearing block to provide motor shaft assistance, successfully minimize torque caused shifts,and lessen gear striping problem.
8.Top mounted ESC platform to make the most of primary blades air flow for reliable cooling.
9.Ingenious sliding battery tray rails imbedded into 3K side frame, offering simple battery access and protection.
10.Brand name brand-new CNC machined metal tail gear box, with thicker side plates to increase rigidness. The more structured design also allows for simpler disassembly.

Users need to have a specific idea of security to operate the R/C helicopters.
Be sure to check out and adhere to associated security notes of instruction manual before flying.

Spec(GP900 Head lock gyro combo):
Operating Voltage:DC 3.5~8.4V
Current Intake:<80mA @ 4.8V
Angular Detection Speed:600 degrees/sec
Operating Humidity:-20℃~65℃
RoHS certification.
Operating Humidity:0%~95%
Size:36.5x25.2x15.6mm
Weight:11g

Specification(T-REX 700E F3C V3):
Length: 1343mm
Height: 424mm
Width: 210mm
Main Blade Length: 700mm
Main Rotor Diameter: 1582mm
Tail Rotor Diameter: 281mm
Motor Drive Gear:12T
Main Drive Gear:112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 24T
Drive Gear Ratio: 1:9.33:4.33
Weight(With Motor): 3230g
Flying Weight: Approx. 5200g

Accessories:
T-REX 700E F3C Kits Set X1
Aluminum Tail Boom X1
3K Carbon Fiber Tail Boom X1
F3C 700mm Carbon fiber blades X1
DS615 Digital servoX3 set
DS655 Digital servo X1
GP900 Head Lock Gyro X1
750MX Brushless Motor(450KV) X1
Castle ICE2 HV 120 Brushless ESC X1
6A External BEC w/ 5.1V Two-way Step-down voltage regulator X1
105mm 3K Carbon Fiber Tail Blades X1 Set

Radio transmitter and electronic equipment required for assembly:

Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 4500 ~ 5200mAh X2
Dial Pitch Gauge