Align T-REX 800E PRO DFC Super Combo

Instruction(3GX Programmable Flybarless System) :
Brand name new upgraded 3GX represents a brand-new generation of multi function flybarless system. The drastically enhanced efficiency will produce instant effect on any lovers.
3GX is presently the smallest and lightest flybarless system on the market. 2 ports to straight connect Spektrum and JR satellite receivers, in addition to full support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all the CCPM swashplate system presently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphical highlighted direction on the computer system setup software directs the user through a step by action setup process, permitting quick setups without leaving out any steps.
Support Bluetooth connection. With the soon to be released Bluetooth connection set, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps permitting live adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is had to decrease electronic wire clutters.
Custom specifications have been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export function enables custom settings to be shared amongst buddies.
3GX utilizes brand new gyroscope sensing units of the highest specs when compared with other flybarless systems presently on the market, permitting it to be utilized under severe conditions. Double axis plus rudder sensor drastically enhances swashplate and rudder correction accuracy compared with last generation 3G. This is clearly obvious in stable hover as well as highly aerobatic routines.
Suitable for helicopter of all class from 250 to 800, glow engine or electrical powered. The remarkable vibration resistant characteristic is evident even when mounted with more difficult double sided mounting tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, in addition to an entirely re-written firmware. The outcome is a remarkable stability enhancement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.
With built in pirouette payment function, 3GX has the ability to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flips kind of maneuvers are quickly accomplished with accuracy.
3GX's rudder enables consistent rudder feel even under high speed conditions. This exceptional control feel will allow pilot of all skill levels to experience the ideal integration between 3GX and helicopter.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position as well as altitude, as well as self-governing way point flights as well as return home.

Specification(T-REX 800E DFC) :
1. Equipped with the low CG DFC rotor head, effectively decrease wind resistance throughout flight, offering the most direct and accurate control feel back to the pilot, and displays exciting 3D efficiency and inconceivable flight speed.
2. New style swash anti-rotation guide with ingrained anti-wear product, effectively lessen the wear between swashplate long ball and guide.
3. Equipped with brand new 780 3G carbonfiber primary blades designed specifically for extreme 3D flights, featuring dexterity and stability, and new graphics paint scheme. The increased blade rigidness enhances anti torsion particular throughout flight, and the new airfoil decreases turbulence near the blade pointer, decreasing blade noise and power loss.
4. Brand name new tail blade designed to sustain ideal tail locking efficiency under high head speed and extreme flight conditions.
5. The shapely Reinforcement plate and brace are special style for T-REX 800E, effectively increase the torsional strength of primary frame, under extreme 3D maneuver, you can highly feel its solid reinforcement from its structure, thenew CNC machined aluminum electroplate red, is specific organized in groups of 850MX motor, subtly bring theT-REX 800 stylish and metal charm.
6. Innovative composite of fiber product for landing gear, unique stylish shape, functional strength and visual charm are both ingenious style.
7. Using competitive product and special imbedded innovation for vertical tail, improved its structural strength and store texture efficiently, active color offering exceptional visibility.
8. Brand name new CCPM direct servo linkage style to get rid of the weight of double push-pull linkage system, allowing faster and more accurate control response.
9. Integrated servo mounts on the primary shaft bearing blocks, permitting cyclic servos to be mounted straight onto the bearing blocks, which together with the composite product frame plates, producing a clean and uncluttered look.
10. Uses composite carbon product integration method on frame structure for ease of upkeep and high rigidness. Increased front opening area to allow for easier battery installation.
11. Innovative sliding battery tray rails imbedded into the 3K side frames, with patented spring filled locking system, permitting quick battery access as well as battery protection.
12. Top mounted motor base bringing the motor's center of mass more detailed to turning disc, improving 3D dexterity and permitting blade drafts to cool the motor effectively.
13. Motor mount consists of 3rd bearing block to provide motor shaft support, effectively decrease torque induced shifts, and lessen gear striping issue.
14. Uses high specification MOD1 CNC helical primary gear and MOD 1 tail drive helical gear to increase gear mesh area, and lessen gear noise throughout flight.
15. Top mounted ESC platform to make the most of primary blades air flow for effective cooling.
16. New light-weight H-shaped electrical gadget retention system for protection, as well as ergonomically proper style to simplify operation .
17. 800MX features high efficiency, remarkable power, exceptional torque, low existing draw and low temperature; it?s capable of keeping consistent torque and head speed through constant 3D maneuvers.
18. Brand name new transmission with more streamlined style also permits easier disassembly.
19. High quality new tail transmission style, integrated with new double point mounted tail pitch control assembly to lessen slops and increase rudder control accuracy.
20. High torque ranked one way bearing base.
21. High accuracy bearing supported double push point rudder control style.
22. High speed ranked thrust bearings included into tail blade grips.
23. Equipped with 3rd bearing primary shaft support to increase rigidness, fulfilling the requirements of extreme 3D maneuvers.
24. New style wrap around airbrushed fiberglass canopy, with aerodynamic type to decrease wind resistance. 4 point anti-vibration mounts for quick install and removal.
25. New CNC aluminum alloy mounting plate.

Users must have a specific concept of security to run the R/C helicopters.
Be sure to read and adhere to related safety notes of instruction manual prior to flying.

Specification(3GX Programmable Flybarless System) :
Operating Temperature:-20~65 degree
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size:36.5x25.2x15.6 mm Size
Weight:11g
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Changes initial factory receiver)
Futaba S.BUS system support
Integrated in governor function
Maximum working voltage:8.5V
Suitable with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without the use of a PC
Suitable with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type recognization Specification(T-REX 800E DFC) :
Length: 1490mm
Height: 402mm
Width: 204mm
Main Blade Length: 780mm
Main Rotor Size: 1740mm
Tail Rotor Size: 301mm
Motor Drive Gear:12T
Main Drive Gear:112T
Autorotation Tail Own Gear: 104T
Tail Own Gear: 22T
Own Gear Ratio: 1:9.33:4.37
Weight(With Motor): 4100g

Devices:
T-REX 800E PRO DFC Kits Set x 1set
3GX Flybarless system x 1
780 Carbon Fiber Blades x 1set
BL800H High Voltage Brushless Servo with CNC aluminum servo horns x 3
BL850H High Voltage Brushless Servo x 1
3K Carbon Fiber Tail Boom x 1
850MX Brushless Motor(520KV) x 1
Castle EDGE HV 160 Brushless ESC x 1
115mm 3K Carbon Fiber Tail Blades x 1set

Radio transmitter and electronic equipment required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 4500 ~ 5200mAh x 2
2S Li-Po 1900 ~ 2300mAh x 1