Align T-REX 800E DFC Flybarless Super Combo Helicopter Kit w/Motor, E

This is the Align T-REX 800E DFC Flybarless Super Combination Helicopter Set. This kit consists of an Align 750MX 450kV motor, a Castle ICE2 HV 120 Brushless ESC, three Align BL700H High Voltage Brushless Servos, one Align BL750H High Voltage Brushless Servo, 800 Carbon Fiber Rotor Blades, 115mm 3K Carbon Fiber Tail Blades and the awesome Align 3GX Flybarless System!

T-REX 800E DFC Features: Created specifically for aerial photography and cinematography
The long 800mm primary blades supply exceptional flight stability and high payload capacity
Equipped with DFC flybarless primary rotor system; the very low CG style efficiently decreases aerodynamic resistance and improves flight stability qualities
Carbon material integration technology is used in the frame plate structure, leading to easy upkeep and operation benefit
The frame has an installing location for the optional Align aerial gimble system upgrade, which can be mounted without any modifications
Devoted APS control unit and sensor unit mounting platform to streamline setup
Innovative sliding battery tray rails inserted into the 3K side frame, providing easy battery gain access to and defense
Leading mounted motor base, allowing blade drafts to cool the motor efficiently
Motor install consists of 3rd bearing block to supply motor shaft support; efficiently lowering torque caused shifts and lessened gear striping problems
Utilizes high spec MOD1 112 tooth CNC helical primary gear and MOD 1 helical tail drive gear to increase gear mesh area, and minimize gear noise during flight
Leading mounted ESC platform to make the most of primary blades airflow for reliable cooling
New lightweight H-shaped electric device retention system for defense, as well as ergonomically proper style to streamline operation
Equipped with 750MX series high performance brushless motor, with ribbed case and fan to drastically increase cooling result, and improve overall power output
Upgraded transmission with more structured style also allows for easier disassembly
High quality upgraded tail gearbox style, combined with an updated double point mounted tail pitch control assembly to minimize slop and increase rudder control accuracy
High torque rated one way bearing base
High accuracy bearing supported double push point rudder control style
High speed rated thrust bearings integrated into the tail blade grips
High grade painted fiberglass canopy with upgraded 4 point anti-vibration mounting mechanism to streamline setup
Upgraded CNC aluminum alloy mounting plate

T-REX 800E Specs:

Length: 1490mm

Height: 400mm

Main Blade Length: 800mm

Main Rotor Size: 1780mm

Tail Rotor Size: 301mm

Motor Drive Gear: 13T

Main Drive Gear: 110T

Autorotation Tail Drive Gear: 104T

Tail Drive Gear: 22T

Drive Gear Ratio: 1:8.46:4.73

Weight (with Motor): 3516g

Flying Weight: 5400g

3GX Programmable Flybarless System Includes:

Upgraded 3GX represents a brand-new generation of multi-function flybarless system. The drastically improved efficiency will develop an immediate impact on any lover.
3GX is currently the smallest and lightest flybarless system on the marketplace and includes two ports to straight link Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
Based upon the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through a basic procedure. In addition, the 3GX can support all of the CCPM swashplate systems currently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphic illustrated instruction on the computer system setup software application directs the user through a step by step setup procedure, allowing for fast setups without leaving out any steps.
Assistance Bluetooth connectivity. With the quickly to be launched Bluetooth connectivity kit, 3GX can be configured wirelessly from a PC. Ultimately there will also be smartphone apps allowing live changes to 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is needed to minimize electronic wire clutter.
A library of pre-configured 3GX settings specifically readily available for T-Rex series of helicopters, allowing pilots to attain the most optimum setup for their helicopters.
3 levels of flight mode are readily available on the 3GX to supply various understandings of starting and advanced pilots.
Custom-made criteria have been opened up in 3GX to enable pilots to fine tune numerous settings for swashplate and rudder. Settings export feature permits custom-made settings to be shared amongst pals.
3GX uses brand new gyroscope sensors of the highest specs when compared to other flybarless systems currently on the marketplace, allowing it to be used under extreme conditions. Double axis plus rudder sensor drastically improves swashplate and rudder correction accuracy compared to the last generation 3G. This is plainly obvious in stable hover as well as extremely aerobatic regimens.
Suitable for helicopters of all class from 200 to 700, glow engine or electric powered. The exceptional vibration resistant quality is evident even when mounted with harder double sided mounting tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, along with a completely re-written firmware. The outcome is a remarkable stability enhancement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive dexterity.
With built in pirouette compensation function, 3GX is able to support the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips kind of maneuvers are quickly achieved with accuracy.
3GX's rudder control resembles the luxury GP-780 gyro because rudder level of sensitivity is catered specifically for the helicopter's rudder response qualities, allowing constant rudder feel even under high speed conditions. This outstanding control feel will enable pilot of all skill levels to experience the ideal integration in between 3GX and helicopter.
Extra peripherals prepared for the 3GX consists of 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the frequently readily available position hold gyro system uses just 6 sensors, 3GX?s total of 10 sensors guarantee positioning of helicopter with exceptional precision, providing the ultimate service for aerial photography or other special functions.

3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Maximum working voltage: 8.5V

T-REX 800E DFC Super Combination Consists of: (1) T-REX 800E DFC Kits Set


(1) 3K Carbon Fiber Tail Boom


(1) 800 Carbon Fiber Blades


(1) 750MX Brushless Motor(450KV)
(1) 3GX Flybarless system


(3) BL700H High Voltage Brushless Servo


(1) BL750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC


(1) 115mm 3K Carbon Fiber Tail Blades 

Needed to Complete:

Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
Dial Pitch gauge
(2) 6S LiPo Battery Pack, 4500 ~ 5200mAh
(1) 2S LiPo Battery Pack, 1900 ~ 2300mAh