Align T-REX 800E DFC Flybarless Super Combo Helicopter Kit w/Motor, E

This is the Align T-REX 800E DFC Flybarless Super Combo Helicopter Package. This set consists of an Align 750MX 450kV motor, a Castle ICE2 HV 120 Brushless ESC, 3 Align BL700H High Voltage Brushless Servos, one Align BL750H High Voltage Brushless Servo, 800 Carbon Fiber Rotor Blades, 115mm 3K Carbon Fiber Tail Blades and the awesome Align 3GX Flybarless System!

T-REX 800E DFC Features: Designed specifically for aerial photography and cinematography
The long 800mm primary blades offer exceptional flight stability and high payload capability
Equipped with DFC flybarless primary rotor system; the exceptionally low CG design effectively decreases aerodynamic resistance and enhances flight stability characteristics
Carbon material integration innovation is used in the frame plate structure, leading to basic upkeep and operation benefit
The frame has a mounting place for the optional Align aerial gimble system upgrade, which can be installed without any modifications
Dedicated APS control unit and sensor unit installing platform to streamline setup
Ingenious moving battery tray rails inserted into the 3K side frame, offering simple battery access and protection
Top installed motor base, enabling blade drafts to cool the motor effectively
Motor install includes 3rd bearing block to offer motor shaft support; effectively decreasing torque caused shifts and decreased equipment striping issues
Makes use of high spec MOD1 112 tooth CNC helical primary equipment and MOD 1 helical tail drive equipment to increase equipment mesh location, and reduce equipment sound throughout flight
Top installed ESC platform to take advantage of primary blades air flow for efficient cooling
New lightweight H-shaped electric gadget retention system for protection, in addition to ergonomically proper design to streamline operation
Equipped with 750MX series high efficiency brushless motor, with ribbed case and fan to considerably increase cooling impact, and improve overall power output
Revamped transmission with more streamlined design also permits simpler disassembly
High quality upgraded tail gearbox design, combined with an updated dual point installed tail pitch control assembly to reduce slop and increase rudder control precision
High torque ranked one method bearing base
High precision bearing supported dual push point rudder control design
High speed ranked thrust bearings included into the tail blade grips
High grade painted fiberglass canopy with upgraded 4 point anti-vibration installing system to streamline setup
Revamped CNC aluminum alloy installing plate

T-REX 800E Specifications:

Length: 1490mm

Height: 400mm

Main Blade Length: 800mm

Main Rotor Size: 1780mm

Tail Rotor Size: 301mm

Motor Drive Gear: 13T

Main Drive Gear: 110T

Autorotation Tail Drive Gear: 104T

Tail Drive Gear: 22T

Drive Gear Ratio: 1:8.46:4.73

Weight (with Motor): 3516g

Flying Weight: 5400g

3GX Programmable Flybarless System Includes:

Revamped 3GX represents a new generation of multi-function flybarless system. The considerably improved efficiency will develop an instant effect on any lover.
3GX is presently the smallest and lightest flybarless system on the marketplace and includes 2 ports to straight link Spektrum and JR satellite receivers, in addition to complete support of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a few minutes through an easy procedure. In addition, the 3GX can support all the CCPM swashplate systems presently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphic highlighted instruction on the computer system setup software directs the user through a step by step setup procedure, enabling fast setups without leaving out any actions.
Assistance Bluetooth connection. With the quickly to be released Bluetooth connection set, 3GX can be programmed wirelessly from a PC. Ultimately there will also be smartphone apps enabling live changes to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is had to lower electronic wire clutter.
A library of pre-configured 3GX settings specifically readily available for T-Rex series of helicopters, enabling pilots to achieve the most ideal setup for their helicopters.
Three levels of flight mode are readily available on the 3GX to offer different feels for beginning and advanced pilots.
Custom criteria have been opened up in 3GX to allow pilots to fine tune many settings for swashplate and rudder. Settings export feature enables custom settings to be shared amongst buddies.
3GX uses brand brand-new gyroscope sensors of the highest specs when compared with other flybarless systems presently on the marketplace, enabling it to be used under extreme conditions. Double axis plus rudder sensor considerably enhances swashplate and rudder correction precision compared with the last generation 3G. This is clearly obvious in steady hover in addition to extremely aerobatic routines.
Suitable for helicopters of all class from 200 to 700, glow engine or electric powered. The exceptional vibration resistant quality appears even when installed with harder double sided installing tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, in addition to an entirely re-written firmware. The outcome is a remarkable stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
With built in pirouette payment function, 3GX is able to support the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flips kind of maneuvers are easily accomplished with precision.
3GX's rudder control is similar to the high-end GP-780 gyro because rudder level of sensitivity is catered specifically for the helicopter's rudder action characteristics, enabling consistent rudder feel even under high speed conditions. This excellent control feel will allow pilot of all ability levels to experience the ideal integration in between 3GX and helicopter.
Additional peripherals prepared for the 3GX consists of 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the frequently readily available position hold gyro system uses only 6 sensors, 3GX?s total of 10 sensors guarantee positioning of helicopter with exceptional accuracy, offering the ultimate option for aerial photography or other unique purposes.

3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Optimum working voltage: 8.5V

T-REX 800E DFC Super Combo Includes: (1) T-REX 800E DFC Packages Set


(1) 3K Carbon Fiber Tail Boom


(1) 800 Carbon Fiber Blades


(1) 750MX Brushless Motor(450KV)
(1) 3GX Flybarless system


(3) BL700H High Voltage Brushless Servo


(1) BL750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC


(1) 115mm 3K Carbon Fiber Tail Blades 

Needed to Total:

Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
Dial Pitch gauge
(2) SIX LiPo Battery Pack, 4500 ~ 5200mAh
(1) TWO LiPo Battery Pack, 1900 ~ 2300mAh