Align T-REX 800E DFC Flybarless Super Combo Helicopter Kit w/Motor, E

This is the Align T-REX 800E DFC Flybarless Super Combination Helicopter Kit. This set consists of an Align 750MX 450kV motor, a Castle ICE2 HV 120 Brushless ESC, 3 Align BL700H High Voltage Brushless Servos, one Align BL750H High Voltage Brushless Servo, 800 Carbon Fiber Rotor Blades, 115mm 3K Carbon Fiber Tail Blades and the remarkable Align 3GX Flybarless System!

T-REX 800E DFC Features: Developed specifically for aerial photography and cinematography
The long 800mm main blades offer exceptional flight stability and high payload capability
Equipped with DFC flybarless main rotor system; the incredibly low CG design efficiently decreases aerodynamic resistance and enhances flight stability qualities
Carbon product combination technology is utilized in the frame plate structure, leading to simple maintenance and operation benefit
The frame has a mounting place for the optional Align aerial gimble system upgrade, which can be installed with no modifications
Committed APS control unit and sensor unit mounting platform to simplify setup
Innovative moving battery tray rails anchored into the 3K side frame, providing simple battery access and security
Leading installed motor base, enabling blade drafts to cool the motor efficiently
Motor install consists of third bearing block to offer motor shaft assistance; efficiently decreasing torque caused shifts and decreased equipment striping issues
Uses high spec MOD1 112 tooth CNC helical main equipment and MOD 1 helical tail drive equipment to increase equipment mesh area, and minimize equipment noise during flight
Leading installed ESC platform to benefit from main blades airflow for effective cooling
New light-weight H-shaped electrical gadget retention system for security, in addition to ergonomically proper design to simplify operation
Equipped with 750MX series high efficiency brushless motor, with ribbed case and fan to dramatically increase cooling impact, and enhance overall power output
Upgraded transmission with more streamlined design likewise enables easier disassembly
High quality upgraded tail gearbox design, combined with an updated dual point installed tail pitch control assembly to minimize slop and increase rudder control precision
High torque ranked one method bearing base
High precision bearing supported dual push point rudder control design
High speed ranked thrust bearings included into the tail blade grips
High grade painted fiberglass canopy with upgraded 4 point anti-vibration mounting system to simplify setup
Upgraded CNC aluminum alloy mounting plate

T-REX 800E Requirements:

Length: 1490mm

Height: 400mm

Main Blade Length: 800mm

Main Rotor Diameter: 1780mm

Tail Rotor Diameter: 301mm

Motor Drive Gear: 13T

Main Drive Gear: 110T

Autorotation Tail Drive Gear: 104T

Tail Drive Gear: 22T

Drive Gear Ratio: 1:8.46:4.73

Weight (with Motor): 3516g

Flying Weight: 5400g

3GX Programmable Flybarless System Features:

Upgraded 3GX represents a brand-new generation of multi-function flybarless system. The dramatically improved efficiency will develop an instant effect on any enthusiast.
3GX is presently the tiniest and lightest flybarless system on the marketplace and features two ports to directly connect Spektrum and JR satellite receivers, in addition to full assistance of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through a simple procedure. In addition, the 3GX can support all the CCPM swashplate systems presently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphic illustrated guideline on the computer setup software directs the user through an action by action setup procedure, permitting quick setups without leaving out any steps.
Support Bluetooth connectivity. With the quickly to be released Bluetooth connectivity set, 3GX can be programmed wirelessly from a PC. Eventually there will likewise be smartphone apps enabling live adjustments to 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is had to lower electronic wire clutter.
A library of pre-configured 3GX settings specifically offered for T-Rex series of helicopters, enabling pilots to attain the most optimal setup for their helicopters.
3 levels of flight mode are offered on the 3GX to offer different feels for starting and advanced pilots.
Custom parameters have been opened up in 3GX to enable pilots to fine tune various settings for swashplate and rudder. Settings export function enables custom settings to be shared amongst friends.
3GX uses brand brand-new gyroscope sensors of the highest specs when compared with other flybarless systems presently on the marketplace, enabling it to be utilized under harsh conditions. Double axis plus rudder sensing unit dramatically enhances swashplate and rudder correction precision compared with the last generation 3G. This is plainly obvious in steady hover in addition to highly aerobatic regimens.
Ideal for helicopters of all class from 200 to 700, glow engine or electrical powered. The exceptional vibration resistant quality appears even when installed with harder double sided mounting tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, in addition to a completely re-written firmware. The result is a remarkable stability improvement from previous generation, with stability that measures up to a flybarred helicopter, yet posses explosive agility.
With built in pirouette settlement function, 3GX is able to support the helicopter on a fixed point during pirouetting maneuvers. Pirouetting turns type of maneuvers are easily achieved with precision.
3GX's rudder control is similar to the high-end GP-780 gyro in that rudder sensitivity is catered specifically for the helicopter's rudder action qualities, enabling constant rudder feel even under high speed conditions. This exceptional control feel will enable pilot of all ability levels to experience the perfect combination between 3GX and helicopter.
Extra peripherals planned for the 3GX consists of 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly offered position hold gyro system uses only 6 sensors, 3GX?s total of 10 sensors guarantee positioning of helicopter with exceptional precision, providing the supreme service for aerial photography or other special purposes.

3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm

Weight: 11g

Optimum working voltage: 8.5V

T-REX 800E DFC Super Combination Consists of: (1) T-REX 800E DFC Kits Set


(1) 3K Carbon Fiber Tail Boom


(1) 800 Carbon Fiber Blades


(1) 750MX Brushless Motor(450KV)
(1) 3GX Flybarless system


(3) BL700H High Voltage Brushless Servo


(1) BL750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC


(1) 115mm 3K Carbon Fiber Tail Blades 

Needed to Complete:

Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
Dial Pitch gauge
(2) 6S LiPo Battery Pack, 4500 ~ 5200mAh
(1) 2S LiPo Battery Pack, 1900 ~ 2300mAh