Align T-Rex 700XN Dominator Nitro KIT

T-REX 700XN embraces the brand-new direct to swashplate servo design, compared to previous generation T-REX 700N double push-pull mode control, supplying accurate and quick control! With 700EFL Flybarless Rotor Head System utilizes extreme low CG design, effectively decreases resistance during 3D maneuvers, increased flight responsiveness and precision. Developed to preserve a 90-degree symmetrical angle in between the Rotor Grip Arms and Linkage Rods for remarkable and steady flight performance. Engineered Narrow Body Design efficiently reduce gear abrasion and frame deformation during flight. T-REX 700XN preserve the proper Center of mass CG, moving the engine forward allowed the fuel tank to be positioned in the center of the main shaft to preserve consistent CG as the fuel level modifications during flight.
The brand-new steel alloy clutch liner is long lasting with temperature control avoiding the taking off clutch liner or breaking clutch real estate, the lifetime is over 1000 flights. Receiver install offers cable and electrical wiring security, simple to preserve and put together by eliminating a few screws from the mainframe.
The brand-new generation of T-REX 700XN has a number of innovative design, detonating your inner soul and when again feeling the original passion!

After performing lots of tests to figure out the most efficient aerodynamic canopy we are pleased to launch this brand name brand-new lightweight canopy! This ultimate canopy made from glass and carbon fiber is lightweight and accomplishes best dynamic performance. Likewise a new special paint plan for the latest member of the T-REX family.

Specifically developed for a nitro helicopter to offer remarkable flight stability, and enhance the power for better control. A new blonde yellow layering paint plan produces a stylish look.

Landing skid is tilted 5 degree forward which improves crashworthiness.

Engineered Narrow Body Design efficiently reduce gear abrasion and frame deformation during flight. The Align T-REX brand-new narrow body design is more powerful and increases flight durability.

The brand-new direct to swashplate servo design offers accurate and quick control. Developed to preserve a 90-degree symmetrical angle in between the Rotor Grip Arms and Linkage Rods for remarkable and steady flight performance.

Align Advanced Metal Swashplate strongly links to the rotor holder grips avoiding rotor head disengagement during intense flight. 2 optional linkage ball installing holes enable individual selection of resolution based upon preferred flight performance.

Two brand-new CNC blade holder arms are extremely clean and smooth in appearance. After a number of modifications, we are releasing the brand-new 3D Blade Holder Arms enabling outstanding great accuracy control and effectively doubling flight stability, promoting infinite flight possibilities.

Receiver install offers cable and electrical wiring security, simple to preserve equipment by eliminating a few screws from the mainframe.

Maintaining the proper Center of mass CG is important for helicopters. After extensive Research and Advancement, moving the engine forward allowed the fuel tank to be positioned in the center of the main shaft. This optimum location for the fuel tank permits the 700XN to preserve consistent CG as the fuel level modifications during flight.

The idler pulley-block helical gear improves rotation stability and effectively decreases the load from the gears while increasing bearing capability. The gears made from steel alloy are high strength and wear resistant.
The brand-new steel alloy clutch liner is long lasting with temperature control avoiding the taking off clutch liner or breaking clutch housing.

CNC metal support plate and brace align with frame installing bolts effectively increasing the torsional strength of the mainframe. Under extreme 3D maneuvers, you can feel the enhanced support to the mainframe. Likewise, the plate aids with engine cooling and includes extra security for the motor.

High voltage output: 6A 7.4V BEC with down / guideline system for steady power to the CCPM server channel for receivers and servos. Consists of a built-in one-button push radiance plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Likewise increased external high-frequency filter capacitance to effectively reduce the disturbance generated by external noise; such as high-speed and high torque servos.

An incorporated motor installing bracket permits efficient heat dissipation from the motor. The remarkable Cooling Motor Mount is CNC from high strength aluminum alloy, and anodized for aesthetically pleasing appearance.

Integration of POM Polyacetal into the CNC Aluminum alloy Anti-Rotation Bracket decreases friction in between the linkage ball and the metal Anti-Rotation Bracket while enhancing the efficiency and accuracy of servo performance.

Dual-sided tail servo install enhances the entire frame structure while enabling better availability when servicing the 700XN.
New 8mm Carbon Fiber Tail Boom Brace are more powerful and lighter weight to improve tail control.

Brand brand-new strengthened precision design with high-end M4x8 hexagonal screw upgrade. The brand-new stiff design improves and enhances the entire structure boosting tail performance for all pilots.

 Electric equipment

B6TX 2 In 1 Voltage Regulator Combo x 1

Specification

Length: 1346mm
Height: 384mm
Width: 202mm
Main Blade Length: 700mm
Main Rotor Diameter: 1570mm
Tail Rotor Diameter: 281mm
Motor Drive Gear:13T
Main Drive Gear:107T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 8.23:1:4.73
Fuel Tank Capability: 630cc.
Takeoff Weight: Approximate. 4540gIncluded

T-REX 700XN Package Set x 1 set
700 Carbon Fiber Blades x 1 set
106mm 3K Carbon Fiber Tail Blades x 1 set
B6TX 2 In 1 Voltage Regulator Combo x 1

Radio transmitter and electronic equipment required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
Digital Pitch Gauge
CCPM Servo x 3
Tail Servo x 1
Flybarless System x 1
Requirement servo(for throttle) x 1 
Engine starter x 1
Fuel pump x 1
91~105 Engine x 1
Engine fuel x 1
Governor Sensor x 1