Align T-Rex 700XN Dominator Nitro KIT

T-REX 700XN adopts the new direct to swashplate servo style, compared to previous generation T-REX 700N double push-pull mode control, offering exact and quick control! With 700EFL Flybarless Rotor Head System uses extreme low CG style, efficiently decreases resistance throughout 3D maneuvers, increased flight responsiveness and accuracy. Designed to preserve a 90-degree in proportion angle between the Rotor Grip Arms and Linkage Rods for exceptional and stable flight efficiency. Engineered Narrow Body Design efficiently decrease equipment abrasion and frame deformation throughout flight. T-REX 700XN preserve the correct Center of Gravity CG, moving the engine forward permitted the fuel tank to be positioned in the center of the primary shaft to preserve constant CG as the fuel level changes throughout flight.
The new steel alloy clutch liner is durable with temperature control avoiding the taking off clutch liner or breaking clutch real estate, the lifetime is over 1000 flights. Receiver install supplies cable television and electrical wiring protection, simple to preserve and put together by removing a few screws from the mainframe.
The new generation of T-REX 700XN has a variety of ingenious style, detonating your inner soul and when again feeling the original passion!

After carrying out lots of tests to figure out the most effective aerodynamic canopy we are happy to release this brand name new lightweight canopy! This ultimate canopy made from glass and carbon fiber is lightweight and accomplishes best dynamic efficiency. Likewise a brand-new unique paint plan for the latest member of the T-REX family.

Specifically designed for a nitro helicopter to offer exceptional flight stability, and boost the power for better control. A brand-new blonde yellow layering paint plan produces a stylish look.

Landing skid is slanted 5 degree forward which enhances crashworthiness.

Engineered Narrow Body Design efficiently decrease equipment abrasion and frame deformation throughout flight. The Align T-REX new narrow body style is more powerful and increases flight durability.

The new direct to swashplate servo style supplies exact and quick control. Designed to preserve a 90-degree in proportion angle between the Rotor Grip Arms and Linkage Rods for exceptional and stable flight performance.

Align Advanced Metal Swashplate strongly connects to the rotor holder grips preventing rotor head disengagement throughout intense flight. 2 optional linkage ball installing holes allow for personal selection of resolution based upon desired flight performance.

Two new CNC blade holder arms are extraordinarily tidy and smooth in appearance. After numerous modifications, we are launching the new 3D Blade Holder Arms allowing for outstanding great accuracy control and efficiently doubling flight stability, stimulating limitless flight possibilities.

Receiver install supplies cable television and electrical wiring protection, simple to preserve equipment by removing a few screws from the mainframe.

Maintaining the correct Center of Gravity CG is necessary for helicopters. After substantial Research and Advancement, moving the engine forward permitted the fuel tank to be positioned in the center of the primary shaft. This optimal place for the fuel tank allows the 700XN to preserve constant CG as the fuel level changes throughout flight.

The idler pulley-block helical equipment enhances rotation stability and efficiently decreases the load from the gears while increasing bearing capability. The gears made from steel alloy are high strength and use resistant.
The new steel alloy clutch liner is durable with temperature control avoiding the taking off clutch liner or breaking clutch housing.

CNC metal reinforcement plate and brace line up with frame installing bolts efficiently increasing the torsional strength of the mainframe. Under extreme 3D maneuvers, you can feel the enhanced reinforcement to the mainframe. Likewise, the plate helps with engine cooling and adds extra protection for the motor.

High voltage output: 6A 7.4V BEC with down / policy system for stable power to the CCPM server channel for receivers and servos. Includes an integrated one-button push glow plug igniter removing the hassle of using conventional electrical clip plug on igniters. Likewise increased external high-frequency filter capacitance to efficiently decrease the disturbance created by external noise; such as high-speed and high torque servos.

An integrated motor installing bracket permits effective heat dissipation from the motor. The exceptional Cooling Motor Mount is CNC from high strength aluminum alloy, and anodized for visually pleasing appearance.

Integration of POM Polyacetal into the CNC Aluminum alloy Anti-Rotation Bracket decreases friction between the linkage ball and the metal Anti-Rotation Bracket while enhancing the performance and accuracy of servo performance.

Dual-sided tail servo install enhances the whole frame structure while allowing for better accessibility when servicing the 700XN.
New 8mm Carbon Fiber Tail Boom Brace are more powerful and lighter weight to enhance tail control.

Brand new strengthened accuracy style with high-end M4x8 hexagonal screw upgrade. The new stiff style enhances and enhances the whole structure boosting tail efficiency for all pilots.

 Electric equipment

B6TX 2 In 1 Voltage Regulator Combo x 1

Specification

Length: 1346mm
Height: 384mm
Width: 202mm
Main Blade Length: 700mm
Main Rotor Size: 1570mm
Tail Rotor Size: 281mm
Motor Drive Gear:13T
Main Drive Gear:107T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 8.23:1:4.73
Fuel Tank Capability: 630cc.
Departure Weight: Approximate. 4540gIncluded

T-REX 700XN Set Set x 1 set
700 Carbon Fiber Blades x 1 set
106mm 3K Carbon Fiber Tail Blades x 1 set
B6TX 2 In 1 Voltage Regulator Combo x 1

Radio transmitter and electronic equipment needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
Digital Pitch Gauge
CCPM Servo x 3
Tail Servo x 1
Flybarless System x 1
Standard servo(for throttle) x 1 
Engine starter x 1
Fuel pump x 1
91~105 Engine x 1
Engine fuel x 1
Guv Sensor x 1