Align T-Rex 700XN Dominator Nitro KIT

T-REX 700XN adopts the brand-new direct to swashplate servo design, compared to previous generation T-REX 700N double push-pull mode control, providing precise and quick control! With 700EFL Flybarless Rotor Head System makes use of extreme low CG design, successfully decreases resistance during 3D maneuvers, increased flight responsiveness and accuracy. Developed to keep a 90-degree symmetrical angle in between the Rotor Grip Arms and Linkage Rods for superior and stable flight efficiency. Engineered Narrow Body Design efficiently decrease equipment abrasion and frame deformation during flight. T-REX 700XN keep the proper Center of Gravity CG, moving the engine forward allowed the fuel tank to be placed in the center of the main shaft to keep constant CG as the fuel level modifications during flight.
The brand-new steel alloy clutch liner is durable with temperature control avoiding the blowing up clutch liner or breaking clutch housing, the lifetime is over 1000 flights. Receiver mount provides cable television and electrical wiring protection, simple to keep and put together by getting rid of a couple of screws from the mainframe.
The brand-new generation of T-REX 700XN has a variety of innovative design, detonating your inner soul and once again feeling the original passion!

After performing lots of tests to figure out the most effective aerodynamic canopy we are pleased to launch this brand brand-new lightweight canopy! This ultimate canopy made of glass and carbon fiber is lightweight and accomplishes best dynamic efficiency. Likewise a new unique paint scheme for the latest member of the T-REX family.

Specifically developed for a nitro helicopter to supply superior flight stability, and boost the power for better control. A new blonde yellow layering paint scheme creates an elegant look.

Landing skid is tilted 5 degree forward which enhances crashworthiness.

Engineered Narrow Body Design efficiently decrease equipment abrasion and frame deformation during flight. The Align T-REX brand-new narrow body design is more powerful and increases flight durability.

The brand-new direct to swashplate servo design provides precise and quick control. Developed to keep a 90-degree symmetrical angle in between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance.

Align Advanced Metal Swashplate strongly links to the rotor holder grips avoiding rotor head disengagement during extreme flight. 2 optional linkage ball mounting holes enable individual selection of resolution based on desired flight performance.

Two brand-new CNC blade holder arms are extremely clean and smooth in look. After numerous modifications, we are launching the brand-new 3D Blade Holder Arms permitting outstanding great precision control and successfully doubling flight stability, promoting unlimited flight possibilities.

Receiver mount provides cable television and electrical wiring protection, simple to keep devices by getting rid of a couple of screws from the mainframe.

Maintaining the proper Center of Gravity CG is important for helicopters. After substantial Research study and Advancement, moving the engine forward allowed the fuel tank to be placed in the center of the main shaft. This optimum location for the fuel tank permits the 700XN to keep constant CG as the fuel level modifications during flight.

The idler sheave helical equipment enhances rotation stability and successfully decreases the load from the gears while increasing bearing capacity. The gears made of steel alloy are high strength and wear resistant.
The brand-new steel alloy clutch liner is durable with temperature control avoiding the blowing up clutch liner or breaking clutch housing.

CNC metal reinforcement plate and brace align with frame mounting bolts successfully increasing the torsional strength of the mainframe. Under extreme 3D maneuvers, you can feel the improved reinforcement to the mainframe. Likewise, the plate assists with engine cooling and adds extra protection for the motor.

High voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes an integrated one-button push radiance plug igniter removing the inconvenience of using standard electrical clip plug on igniters. Likewise increased external high-frequency filter capacitance to successfully lower the disturbance generated by external noise; such as high-speed and high torque servos.

An incorporated motor mounting bracket enables effective heat dissipation from the motor. The superior Cooling Motor Mount is CNC from high strength aluminum alloy, and anodized for visually pleasing appearance.

Integration of POM Polyacetal into the CNC Aluminum alloy Anti-Rotation Bracket decreases friction in between the linkage ball and the metal Anti-Rotation Bracket while improving the performance and precision of servo performance.

Dual-sided tail servo mount reinforces the whole frame structure while permitting better accessibility when servicing the 700XN.
New 8mm Carbon Fiber Tail Boom Brace are more powerful and lighter weight to enhance tail control.

Brand brand-new strengthened accuracy design with high-end M4x8 hexagonal screw upgrade. The brand-new rigid design enhances and reinforces the whole structure boosting tail efficiency for all pilots.

 Electric devices

B6TX 2 In 1 Voltage Regulator Combo x 1

Requirements

Length: 1346mm
Height: 384mm
Width: 202mm
Main Blade Length: 700mm
Main Rotor Size: 1570mm
Tail Rotor Size: 281mm
Motor Drive Gear:13T
Main Drive Gear:107T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 8.23:1:4.73
Fuel Tank Capacity: 630cc.
Launch Weight: Approximate. 4540gIncluded

T-REX 700XN Kit Set x 1 set
700 Carbon Fiber Blades x 1 set
106mm 3K Carbon Fiber Tail Blades x 1 set
B6TX 2 In 1 Voltage Regulator Combo x 1

Radio transmitter and electronic devices needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
Digital Pitch Gauge
CCPM Servo x 3
Tail Servo x 1
Flybarless System x 1
Standard servo(for throttle) x 1 
Engine starter x 1
Fuel pump x 1
91~105 Engine x 1
Engine fuel x 1
Guv Sensor x 1