Align T-Rex 700XN Dominator Nitro KIT

T-REX 700XN embraces the brand-new direct to swashplate servo style, compared to previous generation T-REX 700N double push-pull mode control, supplying precise and fast control! With 700EFL Flybarless Rotor Head System makes use of severe low CG style, successfully reduces resistance during 3D maneuvers, increased flight responsiveness and accuracy. Developed to keep a 90-degree balanced angle in between the Rotor Grip Arms and Linkage Rods for exceptional and stable flight efficiency. Engineered Narrow Body Style efficiently decrease equipment abrasion and frame deformation during flight. T-REX 700XN keep the appropriate Center of Gravity CG, moving the engine forward allowed the fuel tank to be placed in the center of the main shaft to keep consistent CG as the fuel level modifications during flight.
The brand-new steel alloy clutch liner is long lasting with temperature control preventing the exploding clutch liner or breaking clutch housing, the lifetime is over 1000 flights. Receiver install supplies cable television and circuitry protection, easy to keep and put together by eliminating a few screws from the mainframe.
The brand-new generation of T-REX 700XN has a variety of innovative style, detonating your inner soul and as soon as again feeling the initial passion!

After performing lots of tests to figure out the most effective aerodynamic canopy we are happy to release this brand name brand-new lightweight canopy! This ultimate canopy made of glass and carbon fiber is lightweight and accomplishes best dynamic efficiency. Likewise a new special paint plan for the newest member of the T-REX family.

Specifically developed for a nitro helicopter to offer exceptional flight stability, and enhance the power for much better control. A brand-new blonde yellow layering paint plan produces a stylish look.

Landing skid is tilted 5 degree forward which enhances crashworthiness.

Engineered Narrow Body Style efficiently decrease equipment abrasion and frame deformation during flight. The Align T-REX brand-new narrow body style is stronger and increases flight durability.

The brand-new direct to swashplate servo style supplies precise and fast control. Developed to keep a 90-degree balanced angle in between the Rotor Grip Arms and Linkage Rods for exceptional and stable flight performance.

Align Advanced Metal Swashplate strongly links to the rotor holder grips preventing rotor head disengagement during intense flight. Two optional linkage ball installing holes enable individual selection of resolution based on desired flight performance.

Two brand-new CNC blade holder arms are extremely tidy and smooth in appearance. After several adjustments, we are launching the brand-new 3D Blade Holder Arms permitting excellent great precision control and successfully doubling flight stability, stimulating boundless flight possibilities.

Receiver install supplies cable television and circuitry protection, easy to keep equipment by eliminating a few screws from the mainframe.

Maintaining the appropriate Center of Gravity CG is important for helicopters. After extensive Research study and Development, moving the engine forward allowed the fuel tank to be placed in the center of the main shaft. This maximum location for the fuel tank permits the 700XN to keep consistent CG as the fuel level modifications during flight.

The idler pulley-block helical equipment enhances rotation stability and successfully reduces the load from the gears while increasing bearing capacity. The gears made of steel alloy are high strength and use resistant.
The brand-new steel alloy clutch liner is long lasting with temperature control preventing the exploding clutch liner or breaking clutch housing.

CNC metal reinforcement plate and brace line up with frame installing bolts successfully increasing the torsional strength of the mainframe. Under severe 3D maneuvers, you can feel the improved reinforcement to the mainframe. Likewise, the plate helps with engine cooling and adds additional protection for the motor.

High voltage output: 6A 7.4V BEC with down / policy system for stable power to the CCPM server channel for receivers and servos. Includes an integrated one-button push glow plug igniter getting rid of the hassle of using traditional electrical clip plug on igniters. Likewise increased external high-frequency filter capacitance to successfully minimize the interference generated by external noise; such as high-speed and high torque servos.

An incorporated motor installing bracket enables effective heat dissipation from the motor. The exceptional Cooling Motor Mount is CNC from high strength aluminum alloy, and anodized for visually pleasing appearance.

Integration of POM Polyacetal into the CNC Aluminum alloy Anti-Rotation Bracket reduces friction in between the linkage ball and the metal Anti-Rotation Bracket while improving the efficiency and precision of servo performance.

Dual-sided tail servo install reinforces the entire frame structure while permitting much better availability when servicing the 700XN.
New 8mm Carbon Fiber Tail Boom Brace are stronger and lighter weight to improve tail control.

Brand brand-new strengthened accuracy style with high-end M4x8 hexagonal screw upgrade. The brand-new stiff style enhances and reinforces the entire structure boosting tail efficiency for all pilots.

 Electric equipment

B6TX 2 In 1 Voltage Regulator Combo x 1

Requirements

Length: 1346mm
Height: 384mm
Width: 202mm
Main Blade Length: 700mm
Main Rotor Size: 1570mm
Tail Rotor Size: 281mm
Motor Drive Gear:13T
Main Drive Gear:107T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 8.23:1:4.73
Fuel Tank Capacity: 630cc.
Launch Weight: Approximate. 4540gIncluded

T-REX 700XN Kit Set x 1 set
700 Carbon Fiber Blades x 1 set
106mm 3K Carbon Fiber Tail Blades x 1 set
B6TX 2 In 1 Voltage Regulator Combo x 1

Radio transmitter and electronic equipment required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
Digital Pitch Gauge
CCPM Servo x 3
Tail Servo x 1
Flybarless System x 1
Requirement servo(for throttle) x 1 
Engine starter x 1
Fuel pump x 1
91~105 Engine x 1
Engine fuel x 1
Governor Sensing unit x 1