Align T-REX 700N Nitro DFC .90 Flybarless Super Combo Helicopter Kit

This is the Align T-REX 700 Nitro DFC .90 Flybarless Super Combination Helicopter Set. This amazing plan consists of not just the T-REX 700 Nitro .90 Set, but likewise Aluminum Tail Booms, a 690 3G Carbon Fiber blade set, the GP750 Head Lock, three DS615 cyclic servos, one DS655 tail servo, a governor sensing unit, a 2-in-1 Voltage Regulator as well as the fantastic 3GX Programmable Flybarless System. This very combination offers you with an incredible helicopter package and an equally outstanding electronic plan all in one box.

700 Nitro DFC Features:

The Align 700 Nitro DFC helicopter is geared up with a very low CG design to successfully minimize wind resistance during flight and supply the most direct and exact control feel back to the pilot, providing exciting 3D efficiency and unimaginable flight speed.
The 3K Carbon Fiber plate frame design is narrow, basic and extremely rigid making assembly and maintenance practical.
The big size clutch assembly includes a unique setup technique. In addition, the clutch is very balanced with minimal vibration and a strong power transfer.
There is a front installed rudder servo to reduce exhaust contamination.
There is an upgraded H-cross electronics mounting platform area for a simplified setup for the electronics.
The 700N uses a larger capacity fuel tank for bigger displacement engines and increasing 3D flight period.
The 700N uses a high specification MOD1 CNC helical main gear and a MOD1 tail drive helical gear to run with the best gear ratio of 8:1:4.95. This offers the best flight efficiency and tail lock.
Dual bearing plus thrust bearing supported tail grip design.
High effectiveness tail shaft drive design.
There is a high effectiveness lightweight engine cooling fan to minimize engine load and improve cooling effectiveness.
The main fuel tank created for stable consistent fuel shipment.
There is a redesigned one way bearing real estate capable of standing up to higher torque.
The quality airbrushed fiberglass canopy includes a 4 point anti-vibration install for fast installs and removals.
The redesigned tail control assembly, with dual mounting points, successfully eliminates slop and enhances control precision and feel.
The tail boom is extended by 15mm to support using 720mm main blades.  When geared up with 91, 105 or 120 class engine, there will be a noticeable increase in power and efficiency!

3GX Programmable Flybarless System Features:

Redesigned 3GX represents the next generation of multi function flybarless systems. The drastically improved efficiency will create an instant impact on any enthusiasts.
The 3GX is currently the tiniest and lightest flybarless system on the marketplace and includes two ports to directly connect Spektrum and JR satellite receivers, in addition to complete assistance of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup merely in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system currently on the marketplace including 90, 120, 135, and 140 degree swashplates.
Graphically detailed directions using the computer system setup software application directs the user as a result of a step by action setup process, enabling quick setups without omitting any steps.
With the soon to be launched Bluetooth connection package, the 3GX can be set wirelessly from a PC. Eventually there will likewise be smartphone apps enabling live modifications to the 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is required, decreasing electronic mess and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, enabling pilots to accomplish the most ideal setup for their helicopter without the guesswork.
3 levels of flight mode are readily available to supply the best feel for novice and advanced pilots.
Custom-made criteria have actually been developed to permit pilots to fine tune various swashplate and rudder settings and a settings export feature permits custom settings to be shared amongst pals.
The 3GX includes the highest spec gyroscope sensing units, enabling it to be utilized in the harshest conditions. The dual axis plus rudder sensing unit drastically enhances swashplate and rudder correction precision and will be felt when hovering, in addition to during aerobatic routines.
Suitable for 200 to 700 class helicopters, glow engine or electrical powered.
The vibration resistant characteristics appear even when installed with more difficult double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, in addition to entirely re-written firmware. The outcome is a dramatic enhancement in stability that equals a flybarred helicopter, while providing explosive dexterity.
With a built in pirouette compensation function, the 3GX has the ability to stabilize the helicopter on a set point during pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly performed with precision.
Rudder control resembles the high-end GP-780 gyro because the rudder level of sensitivity is optimized for the helicopter's rudder response characteristics, enabling consistent rudder feel even under high speed conditions. This outstanding control feel will permit pilots of all ability levels to experience the best combination between the 3GX and the helicopter.
Additional peripherals prepared for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system uses a total of 10 sensing units, guarantee positioning of the helicopter with superior precision and providing the ultimate option for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type acknowledgment

700N Specifications:

Length: 1361mm

Height: 385mm

Main Blade Length: 690mm

Main Rotor Diameter: 1562mm

Tail Rotor Diameter: 281mm

Engine Pinion Gear: 14T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 104T

Tail Drive Gear: 21T

Drive Gear Ratio: 8:1:4.95

Fuel Tank Capacity: 660cc

Weight(With Power System): Approx. 4200g
3GX Specifications:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Optimum working voltage: 8.5V 

Consists of: (1) T-REX 700 Nitro Set


(1) 3GX Programmable Flybarless System


(1) Guv Sensing unit


(1) 690 3G Carbon Fiber blades


(1) 2 In 1 Voltage regulator combination


(3) DS615 Digital servo


(1) DS655 Digital servo
(1) GP750 Head lock combination


(1) Aluminum Tail Boom
Had to Total: Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
Standard servo ( for throttle)
Engine starter
Digital pitch gauge
Fuel pump
Engine fuel
90 Muffler
Line up 91H Engine or 91HP Engine