Align T-REX 700N Nitro DFC .90 Flybarless Super Combo Helicopter Kit

This is the Align T-REX 700 Nitro DFC .90 Flybarless Super Combo Helicopter Set. This amazing bundle consists of not only the T-REX 700 Nitro .90 Set, but also Aluminum Tail Booms, a 690 3G Carbon Fiber blade set, the GP750 Head Lock, three DS615 cyclic servos, one DS655 tail servo, a governor sensing unit, a 2-in-1 Voltage Regulator and also the amazing 3GX Programmable Flybarless System. This super combo provides you with an incredible helicopter set and an equally excellent electronic bundle all in one box.

700 Nitro DFC Features:

The Align 700 Nitro DFC helicopter is equipped with a very low CG design to successfully decrease wind resistance throughout flight and supply the most direct and accurate control feel back to the pilot, supplying exciting 3D performance and unimaginable flight speed.
The 3K Carbon Fiber plate frame design is narrow, easy and extremely stiff making assembly and maintenance convenient.
The large diameter clutch assembly includes a unique installation technique. In addition, the clutch is extremely well balanced with very little vibration and a solid power transfer.
There is a front mounted rudder servo to lessen exhaust contamination.
There is an updated H-cross electronics installing platform section for a streamlined installation for the electronics.
The 700N makes use of a bigger capacity fuel tank for larger displacement engines and increasing 3D flight duration.
The 700N makes use of a high specification MOD1 CNC helical primary equipment and a MOD1 tail drive helical equipment to operate with the very best equipment ratio of 8:1:4.95. This provides the very best flight performance and tail lock.
Dual bearing plus thrust bearing supported tail grip design.
High effectiveness tail shaft drive design.
There is a high effectiveness light weight engine cooling fan to decrease engine load and improve cooling effectiveness.
The primary fuel tank developed for steady constant fuel delivery.
There is an upgraded one method bearing housing efficient in holding up against higher torque.
The quality airbrushed fiberglass canopy includes a 4 point anti-vibration install for fast installs and removals.
The redesigned tail control assembly, with double installing points, successfully eliminates slop and enhances control precision and feel.
The tail boom is extended by 15mm to support using 720mm primary blades.  When equipped with 91, 105 or 120 class engine, there will be a noticeable boost in power and performance!

3GX Programmable Flybarless System Features:

Upgraded 3GX represents the next generation of multi function flybarless systems. The significantly improved performance will develop an instant influence on any enthusiasts.
The 3GX is currently the tiniest and lightest flybarless system on the marketplace and includes two ports to directly connect Spektrum and JR satellite receivers, in addition to complete assistance of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup just in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system currently on the marketplace including 90, 120, 135, and 140 degree swashplates.
Graphically illustrated guidelines using the computer setup software application directs the user as a result of an action by action setup process, permitting quick setups without omitting any steps.
With the quickly to be launched Bluetooth connectivity set, the 3GX can be set wirelessly from a PC. Eventually there will also be smartphone apps enabling live modifications to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is needed, decreasing electronic mess and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, enabling pilots to achieve the most ideal setup for their helicopter without the uncertainty.
Three levels of flight mode are available to supply the perfect feel for novice and advanced pilots.
Custom-made specifications have been established to enable pilots to fine tune numerous swashplate and rudder settings and a settings export function enables customized settings to be shared among buddies.
The 3GX includes the greatest spec gyroscope sensors, enabling it to be used in the harshest conditions. The double axis plus rudder sensing unit significantly enhances swashplate and rudder correction precision and will be felt when hovering, in addition to throughout aerobatic regimens.
Appropriate for 200 to 700 class helicopters, glow engine or electric powered.
The vibration resistant qualities are evident even when mounted with more difficult double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, in addition to completely re-written firmware. The result is a significant improvement in stability that equals a flybarred helicopter, while supplying explosive agility.
With a built in pirouette compensation function, the 3GX is able to stabilize the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly carried out with precision.
Rudder control resembles the high-end GP-780 gyro because the rudder level of sensitivity is optimized for the helicopter's rudder action qualities, enabling constant rudder feel even under high speed conditions. This outstanding control feel will enable pilots of all skill levels to experience the perfect integration in between the 3GX and the helicopter.
Additional peripherals planned for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system makes use of an overall of 10 sensors, guarantee positioning of the helicopter with exceptional precision and supplying the supreme option for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance as much as 6 servos
Automatic servo type acknowledgment

700N Specifications:

Length: 1361mm

Height: 385mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Engine Pinion Gear: 14T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 104T

Tail Drive Gear: 21T

Drive Gear Ratio: 8:1:4.95

Fuel Tank Capability: 660cc

Weight(With Power System): Approx. 4200g
3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V 

Includes: (1) T-REX 700 Nitro Set


(1) 3GX Programmable Flybarless System


(1) Governor Sensor


(1) 690 3G Carbon Fiber blades


(1) 2 In 1 Voltage regulator combo


(3) DS615 Digital servo


(1) DS655 Digital servo
(1) GP750 Head lock combo


(1) Aluminum Tail Boom
Had to Total: Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
Standard servo ( for throttle)
Engine starter
Digital pitch gauge
Fuel pump
Engine fuel
90 Muffler
Line up 91H Engine or 91HP Engine