Align T-REX 700E DFC HV Super Combo Promotion battery

Instruction(3GX Programmable Flybarless System):
Brand new redesigned 3GX represents a brand-new generation of multi function flybarless system. The drastically improved performance will create immediate influence on any lovers.
3GX is currently the tiniest and lightest flybarless system on the marketplace. Two ports to straight link Spektrum and JR satellite receivers, in addition to complete assistance of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a few minutes through a simple process. In addition, the 3GX can support all of the CCPM swashplate system currently on the marketplace including 90, 120, 135, and 140 degrees swashplates.
Graphical showed guideline on the computer system setup software application directs the user through a step by step setup process, allowing for fast setups without leaving out any steps.
Support Bluetooth connection. With the quickly to be released Bluetooth connection package, 3GX can be programmed wirelessly from a PC. Eventually there will also be smartphone apps enabling live changes to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is had to minimize electronic wire clutters.
A library of pre-configured 3GX settings particularly readily available for T-Rex series of helicopters, enabling pilots to achieve the most ideal setup for their helicopters.
Three levels of flight mode is readily available on the 3GX to offer different feels from newbies to innovative pilots.
Custom criteria have actually been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export function permits customized settings to be shared amongst pals.
3GX utilizes brand new gyroscope sensing units of the highest requirements when compared to other flybarless systems currently on the marketplace, enabling it to be utilized under extreme conditions. Dual axis plus rudder sensing unit drastically improves swashplate and rudder correction precision compared to last generation 3G. This is plainly noticeable in steady hover along with highly aerobatic routines.
Suitable for helicopter of all class from 200 to 700, glow engine or electric powered. The exceptional vibration resistant quality appears even when mounted with more difficult double sided installing tape.
3GX utilizes 16 bit processor which is 4 times faster than previous generation, in addition to an entirely re-written firmware. The outcome is a remarkable stability improvement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive agility.
With built in pirouette payment function, 3GX is able to support the helicopter on a set point during pirouetting maneuvers. Pirouetting flips kind of maneuvers are quickly achieved with precision.
3GX's rudder control resembles the high end GP-780 gyro because rudder level of sensitivity is catered particularly for the helicopter's rudder reaction attributes, enabling constant rudder feel even under high speed conditions. This excellent control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
Additional peripherals prepared for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the frequently readily available position hold gyro system utilizes just 6 sensing units, 3GX?s amount to of 10 sensing units ensure positioning of helicopter with exceptional precision, offering the supreme option for aerial photography or other special purposes.

Specification(T-REX 700E DFC):
1. Equipped with the low CG DFC rotor head, effectively minimize wind resistance during flight, offering the most direct and accurate control feel back to the pilot, and shows exhilarating 3D performance and unthinkable flight speed.
2. Brand new CCPM direct servo linkage style to eliminate the weight of double push-pull linkage system, allowing faster and more accurate control reaction.
3. Integrated servo installs on the main shaft bearing obstructs, enabling cyclic servos to be mounted straight onto the bearing obstructs, which together with the composite material frame plates, producing a clean and uncluttered look.
4. Uses composite carbon material integration method on frame structure for ease of upkeep and high rigidity. Increased front opening location to enable simpler battery installation.
5. Ingenious sliding battery tray rails imbedded into the 3K side frames, with patented spring packed locking system, allowing for fast battery access along with battery security.
6. Leading mounted motor base bringing the motor's center of mass better to rotating disc, enhancing 3D agility and enabling blade drafts to cool the motor effectively.
7. Motor mount includes third bearing block to offer motor shaft assistance, effectively minimize torque caused shifts, and minimize equipment striping problem.
8. Uses high specification MOD1 112T CNC helical main equipment and MOD 1 tail drive helical equipment to increase equipment mesh location, and minimize equipment noise during flight.
9. Leading mounted ESC platform to take advantage of main blades air flow for effective cooling.
10. New light-weight H-shaped electric device retention system for security, along with ergonomically correct style to streamline operation .
11. Equipped with 750MX series high efficiency brushless motor, with ribbed case and fan to drastically increase cooling effect, and improve general power output.
12. Brand new transmission with more streamlined style also permits simpler disassembly.
13. High quality new tail transmission style, integrated with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
14. High torque rated one method bearing base.
15. High precision bearing supported dual push point rudder control style.
16. High speed rated thrust bearings integrated into tail blade grips.
17. Equipped with third bearing main shaft assistance to increase rigidity, meeting the requirements of extreme 3D maneuvers.
18. New light-weight landing equipments.
19. High grade painted fiberglass canopy with new 4 point anti-vibration installing system to streamline installation.
20. New CNC aluminum alloy installing plate.

Users need to have a certain idea of security to operate the R/C helicopters.
Be sure to read and abide by related security notes of instruction manual before flying.

Requirements(3GX Programmable Flybarless System) :
Operating Temperature level:-10~60 degree
X and Y axis Operating Angle Variety:-300~+300 degree
Z axis Operating Angle Variety:-600~+600 degree
Size:36.5x25.2x15.6 mm Size
Weight11g Weight
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Replaces initial factory receiver)
Futaba S.BUS system assistance
Integrated in governor function
Optimum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without the use of a PC
Compatible with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type recognization

Requirements(T-REX 700E DFC):
Length: 1345mm
Height: 360mm
Width: 208mm
Main Blade Length: 690mm
Main Rotor Size: 1562mm
Tail Rotor Size: 281mm
Motor Drive Gear:12T
Main Drive Gear:112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 1:9.33:4.37
Weight(With Motor): 2900g

Accessories:
T-REX 700E DFC Packages Set x 1set
Aluminum Tail Boom x 1
3K Carbon Fiber Tail Boom x 1
690 3G Carbon Fiber Blades x 1set
750MX Brushless Motor(530KV) x 1
3GX Flybarless system x 1
BL700H High Voltage Brushless Servo x 3
BL750H High Voltage Brushless Servo x 1
Castle ICE2 HV 120 Brushless ESC x 1
105mm 3K Carbon Fiber Tail Blades x 1set
6S2P 22.2V 5200mAh/40C/A x 2

Radio transmitter and electronic equipment needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 4500 ~ 5200mAh x 2
TWO Li-Po 1900 ~ 2300mAh x 1
Dial Pitch Gauge