Align T-REX 700E DFC HV Super Combo Promotion battery

Instruction(3GX Programmable Flybarless System):
Brand new upgraded 3GX represents a new generation of multi function flybarless system. The drastically enhanced efficiency will create immediate effect on any lovers.
3GX is presently the tiniest and lightest flybarless system on the market. 2 ports to straight link Spektrum and JR satellite receivers, together with full assistance of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through a simple process. In addition, the 3GX can support all the CCPM swashplate system presently on the market including 90, 120, 135, and 140 degrees swashplates.
Graphical illustrated instruction on the computer system setup software directs the user through a step by action setup process, permitting fast setups without omitting any steps.
Support Bluetooth connectivity. With the quickly to be launched Bluetooth connectivity kit, 3GX can be programmed wirelessly from a PC. Ultimately there will likewise be smartphone apps allowing live modifications to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is had to lower electronic wire clutters.
A library of pre-configured 3GX settings particularly offered for T-Rex series of helicopters, allowing pilots to achieve the most ideal setup for their helicopters.
Three levels of flight mode is offered on the 3GX to provide various feels from newbies to innovative pilots.
Custom criteria have been opened up in 3GX to permit pilots to tweak many settings for swashplate and rudder. Settings export feature permits custom settings to be shared amongst buddies.
3GX uses brand name new gyroscope sensing units of the greatest specs when compared to other flybarless systems presently on the market, allowing it to be used under harsh conditions. Double axis plus rudder sensor drastically enhances swashplate and rudder correction accuracy compared to last generation 3G. This is plainly noticeable in steady hover along with extremely aerobatic routines.
Suitable for helicopter of all class from 200 to 700, radiance engine or electrical powered. The remarkable vibration resistant attribute is evident even when mounted with harder double sided mounting tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, together with a completely re-written firmware. The result is a dramatic stability enhancement from previous generation, with stability that matches a flybarred helicopter, yet posses explosive agility.
With built in pirouette compensation function, 3GX has the ability to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting turns kind of maneuvers are quickly accomplished with accuracy.
3GX's rudder control is similar to the high end GP-780 gyro in that rudder sensitivity is catered particularly for the helicopter's rudder action characteristics, allowing consistent rudder feel even under high speed conditions. This exceptional control feel will permit pilot of all ability levels to experience the ideal combination in between 3GX and helicopter.
Additional peripherals planned for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the commonly offered position hold gyro system uses just 6 sensing units, 3GX?s amount to of 10 sensing units ensure positioning of helicopter with remarkable precision, providing the supreme service for aerial photography or other special purposes.

Specification(T-REX 700E DFC):
1. Equipped with the low CG DFC rotor head, successfully lower wind resistance during flight, providing the most direct and precise control feel back to the pilot, and displays exhilarating 3D efficiency and unthinkable flight speed.
2. Brand new CCPM direct servo linkage style to remove the weight of double push-pull linkage system, allowing faster and more precise control reaction.
3. Integrated servo mounts on the primary shaft bearing obstructs, allowing cyclic servos to be mounted straight onto the bearing obstructs, which together with the composite material frame plates, developing a tidy and uncluttered appearance.
4. Uses composite carbon material combination method on frame structure for ease of maintenance and high rigidity. Increased front opening area to enable simpler battery installation.
5. Innovative sliding battery tray rails anchored into the 3K side frames, with patented spring filled latching system, permitting fast battery gain access to along with battery defense.
6. Top mounted motor base bringing the motor's center of gravity closer to rotating disc, improving 3D agility and allowing blade drafts to cool the motor successfully.
7. Motor mount consists of 3rd bearing block to provide motor shaft assistance, successfully lower torque caused shifts, and reduce gear striping problem.
8. Uses high specification MOD1 112T CNC helical primary gear and MOD 1 tail drive helical gear to increase gear mesh area, and reduce gear sound during flight.
9. Top mounted ESC platform to take advantage of primary blades air flow for efficient cooling.
10. New lightweight H-shaped electrical device retention system for defense, along with ergonomically correct style to simplify operation .
11. Equipped with 750MX series high performance brushless motor, with ribbed case and fan to drastically increase cooling impact, and improve total power output.
12. Brand new gear box with more structured style likewise enables simpler disassembly.
13. High quality new tail gearbox style, combined with new double point mounted tail pitch control assembly to reduce slops and increase rudder control accuracy.
14. High torque ranked one way bearing base.
15. High accuracy bearing supported double push point rudder control style.
16. High speed ranked thrust bearings included into tail blade grips.
17. Equipped with 3rd bearing primary shaft assistance to increase rigidity, fulfilling the needs of severe 3D maneuvers.
18. New lightweight landing gears.
19. High grade painted fiberglass canopy with new 4 point anti-vibration mounting system to simplify installation.
20. New CNC aluminum alloy mounting plate.

Users need to have a specific concept of security to run the R/C helicopters.
Be sure to read and abide by related security notes of instruction manual prior to flying.

Specification(3GX Programmable Flybarless System) :
Running Temperature level:-10~60 degree
X and Y axis Operating Angle Variety:-300~+300 degree
Z axis Operating Angle Variety:-600~+600 degree
Size:36.5x25.2x15.6 mm Size
Weight11g Weight
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Replaces initial factory receiver)
Futaba S.BUS system assistance
Integrated in governor function
Optimum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without using a PC
Compatible with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type recognization

Specification(T-REX 700E DFC):
Length: 1345mm
Height: 360mm
Width: 208mm
Main Blade Length: 690mm
Main Rotor Diameter: 1562mm
Tail Rotor Diameter: 281mm
Motor Drive Equipment:12T
Main Drive Equipment:112T
Autorotation Tail Own Equipment: 104T
Tail Own Equipment: 22T
Own Equipment Ratio: 1:9.33:4.37
Weight(With Motor): 2900g

Devices:
T-REX 700E DFC Packages Set x 1set
Aluminum Tail Boom x 1
3K Carbon Fiber Tail Boom x 1
690 3G Carbon Fiber Blades x 1set
750MX Brushless Motor(530KV) x 1
3GX Flybarless system x 1
BL700H High Voltage Brushless Servo x 3
BL750H High Voltage Brushless Servo x 1
Castle ICE2 HV 120 Brushless ESC x 1
105mm 3K Carbon Fiber Tail Blades x 1set
6S2P 22.2V 5200mAh/40C/A x 2

Radio transmitter and electronic equipment needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 4500 ~ 5200mAh x 2
2S Li-Po 1900 ~ 2300mAh x 1
Dial Pitch Gauge