Align T-REX 700E DFC HV Super Combo Promotion battery

Guideline(3GX Programmable Flybarless System):
Brand name brand-new revamped 3GX represents a brand-new generation of multi function flybarless system. The considerably enhanced efficiency will develop immediate impact on any lovers.
3GX is presently the smallest and lightest flybarless system on the marketplace. 2 ports to straight connect Spektrum and JR satellite receivers, together with complete assistance of Futaba's S-BUS system.
Based on the 3G FL760 manual setup process, the 3GX can be setup in a couple of minutes through a basic process. In addition, the 3GX can support all the CCPM swashplate system presently on the marketplace consisting of 90, 120, 135, and 140 degrees swashplates.
Graphical highlighted guideline on the computer setup software directs the user through an action by action setup process, allowing for fast setups without leaving out any steps.
Support Bluetooth connection. With the quickly to be launched Bluetooth connection package, 3GX can be set wirelessly from a PC. Eventually there will also be smartphone apps enabling live adjustments to 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is had to minimize electronic wire clutters.
A library of pre-configured 3GX settings specifically offered for T-Rex series of helicopters, enabling pilots to accomplish the most ideal setup for their helicopters.
Three levels of flight mode is offered on the 3GX to offer various feels from beginners to innovative pilots.
Custom specifications have been opened up in 3GX to allow pilots to tweak numerous settings for swashplate and rudder. Settings export feature allows custom-made settings to be shared among buddies.
3GX uses brand brand-new gyroscope sensors of the highest specifications when compared with other flybarless systems presently on the marketplace, enabling it to be used under harsh conditions. Double axis plus rudder sensing unit considerably enhances swashplate and rudder correction precision compared with last generation 3G. This is plainly obvious in steady hover as well as extremely aerobatic routines.
Suitable for helicopter of all class from 200 to 700, radiance engine or electric powered. The remarkable vibration resistant quality appears even when installed with harder double sided installing tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, together with a totally re-written firmware. The outcome is a significant stability improvement from previous generation, with stability that rivals a flybarred helicopter, yet posses explosive agility.
With integrated in pirouette settlement function, 3GX has the ability to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flips kind of maneuvers are quickly accomplished with precision.
3GX's rudder control resembles the high-end GP-780 gyro in that rudder sensitivity is catered specifically for the helicopter's rudder response attributes, enabling consistent rudder feel even under high speed conditions. This outstanding control feel will allow pilot of all ability levels to experience the perfect combination in between 3GX and helicopter.
Additional peripherals prepared for the 3GX includes 3-axis accelerometer, 3-axis magnetic compass, and GPS positioning system. While the typically offered position hold gyro system uses just 6 sensors, 3GX?s amount to of 10 sensors ensure positioning of helicopter with remarkable precision, supplying the supreme solution for aerial photography or other unique purposes.

Specification(T-REX 700E DFC):
1. Equipped with the low CG DFC rotor head, efficiently minimize wind resistance during flight, supplying the most direct and accurate control feel back to the pilot, and displays exhilarating 3D efficiency and unthinkable flight speed.
2. Brand name brand-new CCPM direct servo linkage style to eliminate the weight of double push-pull linkage system, allowing faster and more accurate control reaction.
3. Integrated servo installs on the primary shaft bearing blocks, enabling cyclic servos to be installed straight onto the bearing blocks, which together with the composite product frame plates, producing a clean and uncluttered look.
4. Utilizes composite carbon product combination strategy on frame structure for ease of upkeep and high rigidness. Increased front opening area to allow for easier battery installation.
5. Ingenious sliding battery tray rails imbedded into the 3K side frames, with patented spring packed latching mechanism, allowing for fast battery access as well as battery security.
6. Leading installed motor base bringing the motor's center of mass more detailed to turning disc, enhancing 3D agility and enabling blade drafts to cool the motor efficiently.
7. Motor install consists of third bearing block to offer motor shaft assistance, efficiently minimize torque caused shifts, and reduce gear striping problem.
8. Utilizes high spec MOD1 112T CNC helical primary gear and MOD 1 tail drive helical gear to increase gear mesh area, and reduce gear sound during flight.
9. Leading installed ESC platform to make the most of primary blades air flow for reliable cooling.
10. New lightweight H-shaped electric gadget retention system for security, as well as ergonomically correct style to streamline operation .
11. Equipped with 750MX series high efficiency brushless motor, with ribbed case and fan to considerably increase cooling effect, and improve overall power output.
12. Brand name brand-new transmission with more structured style also allows for easier disassembly.
13. High quality brand-new tail transmission style, combined with brand-new double point installed tail pitch control assembly to reduce slops and increase rudder control precision.
14. High torque rated one way bearing base.
15. High precision bearing supported double push point rudder control style.
16. High speed rated thrust bearings integrated into tail blade grips.
17. Equipped with third bearing primary shaft assistance to increase rigidness, fulfilling the requirements of severe 3D maneuvers.
18. New lightweight landing gears.
19. High grade painted fiberglass canopy with brand-new 4 point anti-vibration installing mechanism to streamline installation.
20. New CNC aluminum alloy installing plate.

Users must have a particular principle of security to operate the R/C helicopters.
Be sure to read and adhere to related security notes of instruction manual before flying.

Spec(3GX Programmable Flybarless System) :
Running Temperature:-10~60 degree
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size:36.5x25.2x15.6 mm Size
Weight11g Weight
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Changes original factory receiver)
Futaba S.BUS system assistance
Integrated in guv function
Maximum working voltage:8.5V
Suitable with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without using a PC
Suitable with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type recognization

Spec(T-REX 700E DFC):
Length: 1345mm
Height: 360mm
Width: 208mm
Main Blade Length: 690mm
Main Rotor Size: 1562mm
Tail Rotor Size: 281mm
Motor Drive Gear:12T
Main Drive Gear:112T
Autorotation Tail Drive Gear: 104T
Tail Drive Gear: 22T
Drive Gear Ratio: 1:9.33:4.37
Weight(With Motor): 2900g

Devices:
T-REX 700E DFC Sets Set x 1set
Aluminum Tail Boom x 1
3K Carbon Fiber Tail Boom x 1
690 3G Carbon Fiber Blades x 1set
750MX Brushless Motor(530KV) x 1
3GX Flybarless system x 1
BL700H High Voltage Brushless Servo x 3
BL750H High Voltage Brushless Servo x 1
Castle ICE2 HV 120 Brushless ESC x 1
105mm 3K Carbon Fiber Tail Blades x 1set
6S2P 22.2V 5200mAh/40C/A x 2

Radio transmitter and electronic devices required for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
SIX Li-Po 4500 ~ 5200mAh x 2
TWO Li-Po 1900 ~ 2300mAh x 1
Dial Pitch Gauge