Align T-REX 700E DFC Super Combo

Guideline(3GX Programmable Flybarless System):
Brand name new upgraded 3GX represents a new generation of multi function flybarless system. The significantly improved performance will produce immediate effect on any lovers.
3GX is presently the tiniest and lightest flybarless system on the market. 2 ports to straight connect Spektrum and JR satellite receivers, along with full assistance of Futaba's S-BUS system.
Based on the 3G FL760 manual setup procedure, the 3GX can be setup in a couple of minutes through a simple procedure. In addition, the 3GX can support all the CCPM swashplate system presently on the market consisting of 90, 120, 135, and 140 degrees swashplates.
Graphical highlighted instruction on the computer system setup software directs the user through a step by step setup procedure, allowing for fast setups without leaving out any steps.
Support Bluetooth connection. With the quickly to be launched Bluetooth connection package, 3GX can be configured wirelessly from a PC. Ultimately there will likewise be smartphone apps permitting live modifications to 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is needed to decrease electronic wire clutters.
Custom parameters have actually been opened up in 3GX to allow pilots to fine tune numerous settings for swashplate and rudder. Settings export feature enables customized settings to be shared among friends.
3GX uses brand new gyroscope sensors of the greatest requirements when compared with other flybarless systems presently on the market, permitting it to be used under harsh conditions. Double axis plus rudder sensing unit significantly improves swashplate and rudder correction precision compared with last generation 3G. This is clearly obvious in stable hover along with extremely aerobatic routines.
Suitable for helicopter of all class from 200 to 700, glow engine or electrical powered. The remarkable vibration resistant characteristic is evident even when installed with more difficult double sided installing tape.
3GX uses 16 bit processor which is 4 times faster than previous generation, along with a totally re-written firmware. The result is a remarkable stability improvement from previous generation, with stability that equals a flybarred helicopter, yet posses explosive agility.
With built in pirouette settlement function, 3GX has the ability to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flips type of maneuvers are easily achieved with precision.
3GX's rudder enables constant rudder feel even under high speed conditions. This exceptional control feel will allow pilot of all skill levels to experience the perfect integration between 3GX and helicopter.
Support with APS gyro system and bring up more functions for your helicopter. With the APS gyro, the helicopter will have the ability to self stabilize, hold position along with altitude, as well as self-governing method point flights along with return home.

Specification(T-REX 700E V2):
1. Equipped with the low CG DFC rotor head, effectively decrease wind resistance throughout flight, providing the most direct and precise control feel back to the pilot, and exhibits exciting 3D performance and unimaginable flight speed.
2. Brand name new CCPM direct servo linkage style to get rid of the weight of double push-pull linkage system, enabling faster and more precise control reaction.
3. Integrated servo installs on the primary shaft bearing obstructs, permitting cyclic servos to be installed straight onto the bearing obstructs, which together with the composite product frame plates, developing a tidy and uncluttered look.
4. Makes use of composite carbon product integration strategy on frame structure for ease of maintenance and high rigidity. Increased front opening area to allow for simpler battery setup.
5. Ingenious sliding battery tray rails anchored into the 3K side frames, with patented spring filled locking system, allowing for fast battery gain access to along with battery protection.
6. Leading installed motor base bringing the motor's center of gravity more detailed to rotating disc, enhancing 3D dexterity and permitting blade drafts to cool the motor effectively.
7. Motor install includes 3rd bearing block to supply motor shaft assistance, effectively decrease torque caused shifts, and lessen equipment striping problem.
8. Makes use of high spec MOD1 112T CNC helical primary equipment and MOD 1 tail drive helical equipment to increase equipment mesh area, and lessen equipment noise throughout flight.
9. Leading installed ESC platform to make the most of primary blades air flow for effective cooling.
10. New light-weight H-shaped electrical gadget retention system for protection, along with ergonomically proper style to simplify operation .
11. Equipped with 750MX series high effectiveness brushless motor, with ribbed case and fan to significantly increase cooling impact, and improve overall power output.
12. Brand name new gear box with more structured style likewise permits simpler disassembly.
13. High quality new tail transmission style, integrated with new dual point installed tail pitch control assembly to lessen slops and increase rudder control precision.
14. High torque ranked one method bearing base.
15. High precision bearing supported dual push point rudder control style.
16. High speed ranked thrust bearings integrated into tail blade grips.
17. Equipped with 3rd bearing primary shaft assistance to increase rigidity, fulfilling the needs of severe 3D maneuvers.
18. New light-weight landing equipments.
19. High grade painted fiberglass canopy with new 4 point anti-vibration installing system to simplify setup.
20. New CNC aluminum alloy installing plate.

Users must have a certain idea of security to operate the R/C helicopters.
Be sure to check out and abide by associated safety notes of instruction manual before flying.

Requirements(3GX Programmable Flybarless System):
Operating Temperature level:-10~60 degree
X and Y axis Operating Angle Range:-300~+300 degree
Z axis Operating Angle Range:-600~+600 degree
Size:36.5x25.2x15.6 mm Size
Weight11g Weight
Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Changes initial factory receiver)
Futaba S.BUS system assistance
Built in governor function
Maximum working voltage:8.5V
Compatible with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without making use of a PC
Compatible with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type recognization

Requirements(T-REX 700E V2):
Length: 1345mm
Height: 360mm
Width: 208mm
Main Blade Length: 690mm
Main Rotor Size: 1562mm
Tail Rotor Size: 281mm
Motor Drive Equipment:12T
Main Drive Equipment:112T
Autorotation Tail Own Equipment: 104T
Tail Own Equipment: 22T
Own Equipment Ratio: 1:9.33:4.37
Weight(With Motor): 2900g

Accessories:
T-REX 700E DFC Packages Set x 1set
Aluminum Tail Boom x 1
3K Carbon Fiber Tail Boom x 1
690 3G Carbon Fiber Blades x 1set
750MX Brushless Motor(530KV) x 1
3GX Flybarless system x 1
DS615 Digital Servo x 3
DS650 Digital Servo x 1
Castle ICE2 HV 120 Brushless ESC x 1
6A External BEC x1
105mm 3K Carbon Fiber Tail Blades x 1set

Radio transmitter and electronic devices needed for assembly:
Transmitter(7-channel or more, helicopter system)
Receiver(7-channel or more)
6S Li-Po 4500 ~ 5200mAh x 2
TWO Li-Po 1900 ~ 2300mAh x 1
Dial Pitch Gauge