Align T-REX 700E DFC HV Flybarless Super Combo Kit w/Motor, ESC, Gyro

This is the Align T-REX 700E DFC HV Flybarless Super Combination Helicopter Kit. This amazing bundle consists of not just the T-REX 700E DFC Kit, however also aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This package also consists of an Align 530kV 750MX brushless motor, the 3GX flybarless system, three BL700H high voltage brushless cyclic servos and one BL750H high voltage brushless rudder servo, as well as a Castle Creations ICE2 HV 120 brushless ESC, offering you with an extraordinary helicopter package and an equally impressive electronic devices bundle all in the very same box.
700E DFC Features:

The Align 700E DFC helicopter is equipped with the low CG DFC rotor head to efficiently lower wind resistance throughout flight and supply the most direct and accurate control feel back to the pilot, offering thrilling 3D performance and unthinkable flight speed.
CCPM direct servo linkage design gets rid of the weight of a double push-pull linkage system, for quick reaction and accurate control.
Integrated servo installs on the primary shaft bearing obstructs allow the cyclic servos to be mounted directly to the bearing obstructs, when combined with the composite product frame plates, creates a clean and uncluttered look.
The frame utilizes an integrated composite carbon product method for ease of upkeep and high rigidness, while the increased front opening area enables basic battery installation.
The ingenious sliding battery tray rails are anchored into the 3K side frames, with a patented spring filled locking mechanism permitting fast battery access as well as battery protection.
A leading mounted motor base brings the motor's center of mass closer to the rotating disc, improving 3D dexterity and enabling blade drafts to efficiently cool the motor.
The motor mount system features a third bearing block to supply enhanced motor shaft support, decreasing torque shift and minimizing the risk of striping a gear.
The drive train features a high spec MOD1 112T CNC helical primary equipment and a helical cut MOD1 tail drive equipment to improve the equipment mesh and decrease equipment noise throughout flight.
A leading mounted ESC platform utilizes the primary blade airflow for effective ESC cooling.
The lightweight H-shaped electrical gadget retention system offers protection, as well as an ergonomically right design to simplify operation.
The included Align 750MX brushless motor features a ribbed case and fan to significantly increase cooling and improve general power output.
The transmission features a streamlined design and permits basic disassembly.
The high quality tail gearbox design, combined with a dual point mounted tail pitch control assembly assists to decrease slop and boost rudder control.
The high torque rated one method bearing base, bearing supported dual push point rudder control design, high speed rated tail blade grip thrust bearings and a third bearing primary shaft support were included to hold up against the abuse of severe 3D flight.
A pre-painted high grade fiberglass canopy utilizes 4 point anti-vibration installing mechanism to allow simple and easy canopy setup.
3GX Features:
Upgraded 3GX represents the next generation of multi function flybarless systems. The significantly improved performance will create an instant influence on any enthusiasts.
The 3GX is presently the smallest and lightest flybarless system on the marketplace and features two ports to directly link Spektrum and JR satellite receivers, together with full support of Futaba's S-BUS system.
Using the 3G FL760 manual setup procedure, the 3GX can be setup just in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system presently on the marketplace including 90, 120, 135, and 140 degree swashplates.
Graphically showed directions utilizing the computer setup software directs the user through a step by action setup procedure, permitting fast setups without leaving out any steps.
With the quickly to be launched Bluetooth connectivity package, the 3GX can be set wirelessly from a PC. Eventually there will also be smartphone apps enabling live changes to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is needed, decreasing electronic clutter and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, enabling pilots to attain the most ideal setup for their helicopter without the guesswork.
Three levels of flight mode are readily available to supply the perfect feel for newbie and advanced pilots.
Custom criteria have been developed to allow pilots to tweak various swashplate and rudder settings and a settings export feature permits custom-made settings to be shared among friends.
The 3GX features the highest spec gyroscope sensors, enabling it to be used in the harshest conditions. The dual axis plus rudder sensing unit significantly improves swashplate and rudder correction accuracy and will be felt when hovering, as well as throughout aerobatic routines.
Suitable for 200 to 700 class helicopters, glow engine or electrical powered.
The vibration resistant attributes are evident even when mounted with harder double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, together with completely re-written firmware. The outcome is a dramatic enhancement in stability that equals a flybarred helicopter, while offering explosive agility.
With a built in pirouette compensation function, the 3GX is able to support the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly carried out with precision.
Rudder control is similar to the high-end GP-780 gyro in that the rudder level of sensitivity is enhanced for the helicopter's rudder response attributes, enabling constant rudder feel even under high speed conditions. This excellent control feel will allow pilots of all ability levels to experience the perfect integration between the 3GX and the helicopter.
Additional peripherals planned for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system utilizes an overall of 10 sensors, ensure positioning of the helicopter with remarkable precision and offering the supreme solution for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Support approximately 6 servos
Automatic servo type recognition
700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 104T

Tail Own Gear: 22T

Own Gear Ratio: 1:9.33:4.37

Weight (With Motor): 2900g
3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V
Consists of:
(1) T-REX 700E DFC Kit
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(1) 3GX Flybarless system
(3) BL700H High Voltage Brushless Servo
(1) BL750H High Voltage Brushless Servo
(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set
Needed to Total:
7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) TWO Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge