Align T-REX 700E DFC HV Flybarless Super Combo Kit w/Motor, ESC, Gyro

This is the Align T-REX 700E DFC HV Flybarless Super Combo Helicopter Kit. This extraordinary plan consists of not only the T-REX 700E DFC Kit, but also aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This set also consists of an Align 530kV 750MX brushless motor, the 3GX flybarless system, three BL700H high voltage brushless cyclic servos and one BL750H high voltage brushless rudder servo, as well as a Castle Creations ICE2 HV 120 brushless ESC, providing you with an incredible helicopter set and an equally impressive electronic devices plan all in the same box.
700E DFC Features:

The Align 700E DFC helicopter is equipped with the low CG DFC rotor go to effectively decrease wind resistance throughout flight and supply the most direct and accurate control feel back to the pilot, providing exhilarating 3D performance and unthinkable flight speed.
CCPM direct servo linkage style gets rid of the weight of a double push-pull linkage system, for fast response and accurate control.
Integrated servo mounts on the primary shaft bearing obstructs allow the cyclic servos to be installed straight to the bearing obstructs, and when integrated with the composite product frame plates, creates a tidy and uncluttered look.
The frame uses an integrated composite carbon product method for ease of upkeep and high rigidness, while the increased front opening area enables easy battery installation.
The ingenious moving battery tray rails are inserted into the 3K side frames, with a trademarked spring filled locking mechanism permitting fast battery access as well as battery protection.
A top installed motor base brings the motor's center of gravity closer to the turning disc, enhancing 3D dexterity and permitting blade drafts to effectively cool the motor.
The motor mount system features a 3rd bearing block to supply improved motor shaft support, minimizing torque shift and minimizing the threat of striping a gear.
The drive train features a high specification MOD1 112T CNC helical primary equipment and a helical cut MOD1 tail drive equipment to enhance the equipment mesh and minimize equipment sound throughout flight.
A top installed ESC platform utilizes the primary blade airflow for reliable ESC cooling.
The lightweight H-shaped electrical device retention system offers protection, as well as an ergonomically right style to streamline operation.
The consisted of Align 750MX brushless motor features a ribbed case and fan to drastically increase cooling and enhance total power output.
The transmission features a streamlined style and permits easy disassembly.
The high quality tail transmission style, integrated with a dual point installed tail pitch control assembly assists to minimize slop and boost rudder control.
The high torque rated one way bearing base, bearing supported dual push point rudder control style, high speed rated tail blade grip thrust bearings and a 3rd bearing primary shaft support were consisted of to hold up against the abuse of severe 3D flight.
A pre-painted high grade fiberglass canopy utilizes 4 point anti-vibration mounting mechanism to allow uncomplicated canopy installation.
3GX Features:
Revamped 3GX represents the next generation of multi function flybarless systems. The drastically enhanced performance will develop an immediate effect on any enthusiasts.
The 3GX is currently the smallest and lightest flybarless system on the marketplace and features two ports to straight connect Spektrum and JR satellite receivers, together with complete support of Futaba's S-BUS system.
Using the 3G FL760 manual setup procedure, the 3GX can be setup merely in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system currently on the marketplace consisting of 90, 120, 135, and 140 degree swashplates.
Graphically highlighted directions utilizing the computer setup software directs the user through an action by action setup procedure, permitting fast setups without leaving out any steps.
With the quickly to be released Bluetooth connection set, the 3GX can be configured wirelessly from a PC. Eventually there will also be smartphone apps permitting live modifications to the 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is required, minimizing electronic clutter and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, permitting pilots to accomplish the most optimal setup for their helicopter without the guesswork.
Three levels of flight mode are available to supply the perfect feel for beginner and advanced pilots.
Custom parameters have been established to allow pilots to tweak various swashplate and rudder settings and a settings export feature permits custom settings to be shared among friends.
The 3GX features the highest spec gyroscope sensors, permitting it to be utilized in the harshest conditions. The dual axis plus rudder sensor drastically enhances swashplate and rudder correction precision and will be felt when hovering, as well as throughout aerobatic routines.
Suitable for 200 to 700 class helicopters, radiance engine or electrical powered.
The vibration resistant attributes are evident even when installed with harder double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, together with entirely re-written firmware. The outcome is a significant improvement in stability that measures up to a flybarred helicopter, while providing explosive agility.
With a built in pirouette settlement function, the 3GX has the ability to support the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly carried out with precision.
Rudder control resembles the high end GP-780 gyro in that the rudder sensitivity is optimized for the helicopter's rudder action attributes, permitting constant rudder feel even under high speed conditions. This excellent control feel will allow pilots of all ability levels to experience the perfect combination between the 3GX and the helicopter.
Additional peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system uses an overall of 10 sensors, guarantee positioning of the helicopter with superior precision and providing the supreme service for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance up to 6 servos
Automatic servo type acknowledgment
700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 104T

Tail Own Gear: 22T

Own Gear Ratio: 1:9.33:4.37

Weight (With Motor): 2900g
3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Optimum working voltage: 8.5V
Consists of:
(1) T-REX 700E DFC Kit
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(1) 3GX Flybarless system
(3) BL700H High Voltage Brushless Servo
(1) BL750H High Voltage Brushless Servo
(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set
Had to Complete:
7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) 2S Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge