Align T-REX 700E DFC HV Flybarless Super Combo Kit w/Motor, ESC, Gyro

This is the Align T-REX 700E DFC HV Flybarless Super Combination Helicopter Package. This extraordinary bundle includes not just the T-REX 700E DFC Package, however likewise aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This package likewise includes an Align 530kV 750MX brushless motor, the 3GX flybarless system, three BL700H high voltage brushless cyclic servos and one BL750H high voltage brushless rudder servo, in addition to a Castle Creations ICE2 HV 120 brushless ESC, supplying you with an unbelievable helicopter package and an equally excellent electronics bundle all in the very same box.
700E DFC Functions:

The Align 700E DFC helicopter is geared up with the low CG DFC rotor go to efficiently minimize wind resistance throughout flight and supply the most direct and accurate control feel back to the pilot, supplying thrilling 3D performance and inconceivable flight speed.
CCPM direct servo linkage design removes the weight of a double push-pull linkage system, for fast reaction and accurate control.
Integrated servo installs on the main shaft bearing obstructs enable the cyclic servos to be installed straight to the bearing obstructs, and when integrated with the composite product frame plates, produces a tidy and uncluttered look.
The frame makes use of an integrated composite carbon product strategy for ease of upkeep and high rigidness, while the increased front opening location allows for basic battery installation.
The innovative moving battery tray rails are imbedded into the 3K side frames, with a trademarked spring loaded latching system enabling fast battery gain access to in addition to battery protection.
A leading installed motor base brings the motor's center of gravity more detailed to the turning disc, enhancing 3D agility and permitting blade drafts to efficiently cool the motor.
The motor mount system includes a 3rd bearing block to supply better motor shaft support, minimizing torque shift and lessening the risk of striping a gear.
The drive train includes a high spec MOD1 112T CNC helical main equipment and a helical cut MOD1 tail drive equipment to enhance the equipment mesh and reduce equipment sound throughout flight.
A leading installed ESC platform uses the main blade air flow for reliable ESC cooling.
The light-weight H-shaped electric device retention system supplies protection, in addition to an ergonomically proper design to simplify operation.
The included Align 750MX brushless motor includes a ribbed case and fan to significantly increase cooling and enhance total power output.
The transmission includes a structured design and enables basic disassembly.
The high quality tail gearbox design, integrated with a double point installed tail pitch control assembly assists to reduce slop and boost rudder control.
The high torque ranked one way bearing base, bearing supported double push point rudder control design, high speed ranked tail blade grip thrust bearings and a 3rd bearing main shaft support were included to withstand the abuse of severe 3D flight.
A pre-painted high grade fiberglass canopy uses 4 point anti-vibration installing system to enable effortless canopy setup.
3GX Features:
Redesigned 3GX represents the next generation of multi function flybarless systems. The significantly improved performance will develop an instant impact on any enthusiasts.
The 3GX is presently the smallest and lightest flybarless system on the market and includes two ports to straight link Spektrum and JR satellite receivers, together with complete support of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup just in a matter of minutes. Additionally, the 3GX can support any CCPM swashplate system presently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically illustrated instructions utilizing the computer system setup software application directs the user through an action by action setup process, enabling fast setups without omitting any steps.
With the quickly to be launched Bluetooth connectivity package, the 3GX can be set wirelessly from a PC. Ultimately there will likewise be smartphone apps permitting live modifications to the 3GX without powering down.
With 3GX's built in Align RCE-G600 governor function, no external governor is needed, minimizing electronic clutter and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, permitting pilots to accomplish the most ideal setup for their helicopter without the guesswork.
Three levels of flight mode are offered to supply the perfect feel for newbie and advanced pilots.
Custom parameters have been developed to enable pilots to tweak numerous swashplate and rudder settings and a settings export function enables custom-made settings to be shared among friends.
The 3GX includes the greatest spec gyroscope sensors, permitting it to be used in the harshest conditions. The double axis plus rudder sensor significantly improves swashplate and rudder correction precision and will be felt when hovering, in addition to throughout aerobatic routines.
Suitable for 200 to 700 class helicopters, glow engine or electric powered.
The vibration resistant qualities appear even when installed with harder double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, together with completely re-written firmware. The result is a remarkable improvement in stability that equals a flybarred helicopter, while supplying explosive agility.
With an integrated in pirouette payment function, the 3GX has the ability to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly performed with precision.
Rudder control is similar to the high-end GP-780 gyro in that the rudder sensitivity is optimized for the helicopter's rudder action qualities, permitting consistent rudder feel even under high speed conditions. This excellent control feel will enable pilots of all ability levels to experience the perfect combination between the 3GX and the helicopter.
Additional peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system makes use of a total of 10 sensors, ensure positioning of the helicopter with superior accuracy and supplying the ultimate solution for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance as much as 6 servos
Automatic servo type acknowledgment
700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 104T

Tail Drive Gear: 22T

Drive Gear Ratio: 1:9.33:4.37

Weight (With Motor): 2900g
3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V
Consists of:
(1) T-REX 700E DFC Package
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(1) 3GX Flybarless system
(3) BL700H High Voltage Brushless Servo
(1) BL750H High Voltage Brushless Servo
(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set
Needed to Complete:
7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) TWO Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge