Align T-REX 700E DFC Flybarless HV Super Combo Kit w/Motor, ESC, 4 HV

This is the Align T-REX 700E DFC Flybarless HV Super Combo Helicopter Kit. This extraordinary bundle includes not only the T-REX 700E DFC Kit, but likewise aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This kit likewise includes an Align 530kV, 750MX brushless motor, a Castle Creations ICE2 HV 120 brushless ESC, 3 DS700 High Voltage Brushless digital cyclic servos and one DS750H High Voltage Brushless digital rudder servo. This super combination provides you with an incredible helicopter kit and a similarly remarkable electronics and High Voltage bundle all in the exact same box.

700E DFC Features:

The Align 700E DFC helicopter is equipped with the low CG DFC rotor visit efficiently minimize wind resistance throughout flight and supply the most direct and exact control feel back to the pilot, supplying exciting 3D efficiency and unthinkable flight speed.
CCPM direct servo linkage style removes the weight of a double push-pull linkage system, for fast reaction and exact control.
Integrated servo installs on the main shaft bearing blocks allow the cyclic servos to be installed directly to the bearing blocks, when combined with the composite product frame plates, creates a tidy and uncluttered appearance.
The frame utilizes an integrated composite carbon product technique for ease of upkeep and high rigidness, while the increased front opening area enables basic battery installation.
The ingenious moving battery tray rails are anchored into the 3K side frames, with a patented spring filled locking mechanism allowing for fast battery access along with battery defense.
A leading installed motor base brings the motor's center of gravity closer to the rotating disc, improving 3D agility and enabling blade drafts to efficiently cool the motor.
The motor mount system features a third bearing block to supply improved motor shaft assistance, reducing torque shift and reducing the risk of striping an equipment.
The drive train features a high specification MOD1 112T CNC helical main gear and a helical cut MOD1 tail drive gear to improve the gear mesh and reduce gear sound throughout flight.
A leading installed ESC platform utilizes the main blade air flow for effective ESC cooling.
The lightweight H-shaped electrical device retention system provides defense, along with an ergonomically appropriate style to simplify operation.
The included Align 750MX brushless motor features a ribbed case and fan to drastically increase cooling and improve overall power output.
The transmission features a streamlined style and enables basic disassembly.
The high quality tail transmission style, combined with a double point installed tail pitch control assembly assists to reduce slop and increase rudder control.
The high torque ranked one way bearing base, bearing supported double push point rudder control style, high speed ranked tail blade grip thrust bearings and a third bearing main shaft assistance were included to endure the abuse of severe 3D flight.
A pre-painted high grade fiberglass canopy utilizes 4 point anti-vibration installing mechanism to allow simple and easy canopy installation. 

700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Diameter: 1562mm

Tail Rotor Diameter: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 104T

Tail Own Gear: 22T

Own Gear Ratio: 1:9.33:4.37

Weight (With Motor): 2900g

Consists of:

(1) T-REX 700E DFC Kit
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(3) DS700H High Voltage Brushless Servo
(1) DS750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set

Had to Total:

7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) TWO Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge or Digital Pitch Gauge