Align T-REX 700E DFC Flybarless HV Super Combo Kit w/Motor, ESC, 4 HV

This is the Align T-REX 700E DFC Flybarless HV Super Combination Helicopter Package. This incredible package consists of not only the T-REX 700E DFC Package, but also aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This kit also consists of an Align 530kV, 750MX brushless motor, a Castle Creations ICE2 HV 120 brushless ESC, three DS700 High Voltage Brushless digital cyclic servos and one DS750H High Voltage Brushless digital rudder servo. This incredibly combination provides you with an unbelievable helicopter kit and an equally outstanding electronics and High Voltage package all in the same box.

700E DFC Functions:

The Align 700E DFC helicopter is geared up with the low CG DFC rotor visit effectively lower wind resistance throughout flight and supply the most direct and exact control feel back to the pilot, supplying thrilling 3D performance and unimaginable flight speed.
CCPM direct servo linkage design gets rid of the weight of a double push-pull linkage system, for fast response and exact control.
Integrated servo mounts on the primary shaft bearing obstructs enable the cyclic servos to be mounted directly to the bearing obstructs, when integrated with the composite material frame plates, creates a clean and uncluttered look.
The frame makes use of an integrated composite carbon material strategy for ease of upkeep and high rigidity, while the increased front opening location allows for basic battery setup.
The innovative moving battery tray rails are anchored into the 3K side frames, with a patented spring packed locking mechanism permitting fast battery access along with battery protection.
A top mounted motor base brings the motor's center of gravity more detailed to the turning disc, improving 3D dexterity and permitting blade drafts to effectively cool the motor.
The motor mount system includes a third bearing block to supply better motor shaft assistance, decreasing torque shift and minimizing the danger of striping a gear.
The drive train includes a high specification MOD1 112T CNC helical primary gear and a helical cut MOD1 tail drive gear to enhance the gear mesh and lessen gear noise throughout flight.
A top mounted ESC platform uses the primary blade airflow for effective ESC cooling.
The lightweight H-shaped electrical device retention system provides protection, along with an ergonomically appropriate design to streamline operation.
The included Align 750MX brushless motor includes a ribbed case and fan to significantly increase cooling and enhance general power output.
The gear box includes a structured design and enables basic disassembly.
The high quality tail transmission design, integrated with a double point mounted tail pitch control assembly helps to lessen slop and boost rudder control.
The high torque ranked one way bearing base, bearing supported dual push point rudder control design, high speed ranked tail blade grip thrust bearings and a third bearing primary shaft assistance were included to hold up against the abuse of severe 3D flight.
A pre-painted high grade fiberglass canopy uses 4 point anti-vibration installing mechanism to enable effortless canopy setup. 

700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Motor Drive Equipment: 12T

Main Drive Equipment: 112T

Autorotation Tail Drive Equipment: 104T

Tail Drive Equipment: 22T

Drive Equipment Ratio: 1:9.33:4.37

Weight (With Motor): 2900g

Includes:

(1) T-REX 700E DFC Package
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(3) DS700H High Voltage Brushless Servo
(1) DS750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set

Had to Total:

7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) TWO Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge or Digital Pitch Gauge