Align T-REX 700E DFC Flybarless HV Super Combo Kit w/Motor, ESC, 4 HV

This is the Align T-REX 700E DFC Flybarless HV Super Combo Helicopter Kit. This unbelievable bundle consists of not just the T-REX 700E DFC Kit, but likewise aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This package likewise consists of an Align 530kV, 750MX brushless motor, a Castle Creations ICE2 HV 120 brushless ESC, 3 DS700 High Voltage Brushless digital cyclic servos and one DS750H High Voltage Brushless digital rudder servo. This super combo provides you with an extraordinary helicopter package and an equally outstanding electronics and High Voltage bundle all in the exact same box.

700E DFC Functions:

The Align 700E DFC helicopter is equipped with the low CG DFC rotor go to efficiently reduce wind resistance during flight and supply the most direct and exact control feel back to the pilot, providing thrilling 3D performance and unimaginable flight speed.
CCPM direct servo linkage design eliminates the weight of a double push-pull linkage system, for fast reaction and exact control.
Integrated servo installs on the primary shaft bearing obstructs enable the cyclic servos to be installed straight to the bearing obstructs, and when combined with the composite product frame plates, produces a clean and uncluttered appearance.
The frame makes use of an integrated composite carbon product method for ease of upkeep and high rigidness, while the increased front opening location permits simple battery setup.
The ingenious sliding battery tray rails are imbedded into the 3K side frames, with a patented spring loaded latching system allowing for fast battery access along with battery security.
A top installed motor base brings the motor's center of gravity more detailed to the turning disc, improving 3D dexterity and allowing blade drafts to efficiently cool the motor.
The motor install system features a 3rd bearing block to supply improved motor shaft assistance, minimizing torque shift and lessening the threat of striping a gear.
The drive train features a high specification MOD1 112T CNC helical primary equipment and a helical cut MOD1 tail drive equipment to enhance the equipment mesh and reduce equipment sound during flight.
A top installed ESC platform utilizes the primary blade airflow for reliable ESC cooling.
The lightweight H-shaped electrical device retention system provides security, along with an ergonomically right design to simplify operation.
The included Align 750MX brushless motor features a ribbed case and fan to significantly increase cooling and enhance total power output.
The gear box features a streamlined design and permits simple disassembly.
The high quality tail gearbox design, combined with a dual point installed tail pitch control assembly helps to reduce slop and boost rudder control.
The high torque ranked one method bearing base, bearing supported double push point rudder control design, high speed ranked tail blade grip thrust bearings and a 3rd bearing primary shaft assistance were included to withstand the abuse of extreme 3D flight.
A pre-painted high grade fiberglass canopy utilizes 4 point anti-vibration installing system to enable uncomplicated canopy setup. 

700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Diameter: 1562mm

Tail Rotor Diameter: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 104T

Tail Own Gear: 22T

Own Gear Ratio: 1:9.33:4.37

Weight (With Motor): 2900g

Consists of:

(1) T-REX 700E DFC Kit
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(3) DS700H High Voltage Brushless Servo
(1) DS750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set

Had to Total:

7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) TWO Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge or Digital Pitch Gauge