Align T-REX 700E DFC Flybarless HV Super Combo Kit w/Motor, ESC, 4 HV

This is the Align T-REX 700E DFC Flybarless HV Super Combo Helicopter Set. This extraordinary bundle consists of not only the T-REX 700E DFC Set, but also aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This package also consists of an Align 530kV, 750MX brushless motor, a Castle Creations ICE2 HV 120 brushless ESC, 3 DS700 High Voltage Brushless digital cyclic servos and one DS750H High Voltage Brushless digital rudder servo. This super combo supplies you with an unbelievable helicopter package and a similarly impressive electronic devices and High Voltage bundle all in the same box.

700E DFC Functions:

The Align 700E DFC helicopter is geared up with the low CG DFC rotor visit effectively lower wind resistance during flight and offer the most direct and precise control feel back to the pilot, providing exhilarating 3D performance and unimaginable flight speed.
CCPM direct servo linkage design removes the weight of a double push-pull linkage system, for quick response and precise control.
Integrated servo mounts on the primary shaft bearing obstructs permit the cyclic servos to be installed straight to the bearing obstructs, when combined with the composite product frame plates, creates a clean and uncluttered look.
The frame uses an integrated composite carbon product method for ease of maintenance and high rigidness, while the increased front opening location allows for easy battery installation.
The innovative sliding battery tray rails are inserted into the 3K side frames, with a trademarked spring filled latching system permitting fast battery access as well as battery defense.
A leading installed motor base brings the motor's center of mass closer to the rotating disc, enhancing 3D dexterity and permitting blade drafts to effectively cool the motor.
The motor mount system includes a third bearing block to offer better motor shaft support, minimizing torque shift and decreasing the danger of striping a gear.
The drive train includes a high specification MOD1 112T CNC helical primary equipment and a helical cut MOD1 tail drive equipment to improve the equipment mesh and lessen equipment sound during flight.
A leading installed ESC platform uses the primary blade air flow for reliable ESC cooling.
The lightweight H-shaped electric gadget retention system supplies defense, as well as an ergonomically appropriate design to simplify operation.
The consisted of Align 750MX brushless motor includes a ribbed case and fan to dramatically increase cooling and improve general power output.
The gear box includes a streamlined design and allows easy disassembly.
The high quality tail gearbox design, combined with a dual point installed tail pitch control assembly assists to lessen slop and increase rudder control.
The high torque rated one way bearing base, bearing supported dual push point rudder control design, high speed rated tail blade grip thrust bearings and a third bearing primary shaft support were consisted of to withstand the abuse of extreme 3D flight.
A pre-painted high grade fiberglass canopy uses 4 point anti-vibration installing system to permit effortless canopy installation. 

700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 104T

Tail Own Gear: 22T

Own Gear Ratio: 1:9.33:4.37

Weight (With Motor): 2900g

Consists of:

(1) T-REX 700E DFC Set
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(3) DS700H High Voltage Brushless Servo
(1) DS750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set

Needed to Complete:

7-channel or more helicopter radio system
(2) 6S Li-Po 4500 ~ 5200mAh
(1) TWO Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge or Digital Pitch Gauge