Align T-REX 700E DFC Flybarless HV Super Combo Kit w/Motor, ESC, 4 HV

This is the Align T-REX 700E DFC Flybarless HV Super Combination Helicopter Package. This extraordinary bundle consists of not just the T-REX 700E DFC Package, however also aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This kit also consists of an Align 530kV, 750MX brushless motor, a Castle Creations ICE2 HV 120 brushless ESC, three DS700 High Voltage Brushless digital cyclic servos and one DS750H High Voltage Brushless digital rudder servo. This incredibly combination supplies you with an incredible helicopter kit and an equally remarkable electronic devices and High Voltage bundle all in the exact same box.

700E DFC Features:

The Align 700E DFC helicopter is equipped with the low CG DFC rotor go to effectively minimize wind resistance throughout flight and provide the most direct and precise control feel back to the pilot, providing exhilarating 3D efficiency and unimaginable flight speed.
CCPM direct servo linkage design eliminates the weight of a double push-pull linkage system, for quick reaction and precise control.
Integrated servo mounts on the primary shaft bearing blocks permit the cyclic servos to be mounted straight to the bearing blocks, and when combined with the composite product frame plates, develops a clean and uncluttered look.
The frame uses an integrated composite carbon product strategy for ease of maintenance and high rigidness, while the increased front opening area allows for easy battery setup.
The ingenious moving battery tray rails are anchored into the 3K side frames, with a patented spring loaded locking mechanism enabling quick battery gain access to as well as battery security.
A leading mounted motor base brings the motor's center of gravity more detailed to the rotating disc, improving 3D dexterity and permitting blade drafts to effectively cool the motor.
The motor install system includes a third bearing block to provide better motor shaft support, lowering torque shift and minimizing the threat of striping a gear.
The drive train includes a high spec MOD1 112T CNC helical primary equipment and a helical cut MOD1 tail drive equipment to improve the equipment mesh and reduce equipment noise throughout flight.
A leading mounted ESC platform uses the primary blade air flow for efficient ESC cooling.
The lightweight H-shaped electrical gadget retention system supplies security, as well as an ergonomically right design to streamline operation.
The consisted of Align 750MX brushless motor includes a ribbed case and fan to dramatically increase cooling and improve total power output.
The gear box includes a streamlined design and enables easy disassembly.
The high quality tail transmission design, combined with a dual point mounted tail pitch control assembly helps to reduce slop and increase rudder control.
The high torque rated one way bearing base, bearing supported double push point rudder control design, high speed rated tail blade grip thrust bearings and a third bearing primary shaft support were consisted of to endure the abuse of severe 3D flight.
A pre-painted high grade fiberglass canopy uses 4 point anti-vibration installing mechanism to permit uncomplicated canopy setup. 

700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 104T

Tail Own Gear: 22T

Own Gear Ratio: 1:9.33:4.37

Weight (With Motor): 2900g

Includes:

(1) T-REX 700E DFC Package
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(3) DS700H High Voltage Brushless Servo
(1) DS750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set

Needed to Total:

7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) TWO Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge or Digital Pitch Gauge