Align T-REX 700E DFC Flybarless HV Super Combo Kit w/Motor, ESC, 4 HV

This is the Align T-REX 700E DFC Flybarless HV Super Combination Helicopter Package. This extraordinary bundle consists of not only the T-REX 700E DFC Package, but also aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This kit also consists of an Align 530kV, 750MX brushless motor, a Castle Creations ICE2 HV 120 brushless ESC, 3 DS700 High Voltage Brushless digital cyclic servos and one DS750H High Voltage Brushless digital rudder servo. This incredibly combo offers you with an amazing helicopter kit and an equally remarkable electronics and High Voltage bundle all in the same box.

700E DFC Functions:

The Align 700E DFC helicopter is geared up with the low CG DFC rotor visit effectively minimize wind resistance during flight and supply the most direct and precise control feel back to the pilot, offering exhilarating 3D performance and inconceivable flight speed.
CCPM direct servo linkage style removes the weight of a double push-pull linkage system, for quick reaction and precise control.
Integrated servo installs on the primary shaft bearing blocks allow the cyclic servos to be mounted directly to the bearing blocks, and when integrated with the composite material frame plates, creates a clean and uncluttered look.
The frame makes use of an integrated composite carbon material method for ease of maintenance and high rigidness, while the increased front opening location permits basic battery setup.
The innovative sliding battery tray rails are inserted into the 3K side frames, with a trademarked spring packed locking mechanism allowing for fast battery gain access to along with battery defense.
A leading mounted motor base brings the motor's center of gravity more detailed to the turning disc, enhancing 3D dexterity and enabling blade drafts to effectively cool the motor.
The motor mount system features a third bearing block to supply improved motor shaft assistance, decreasing torque shift and lessening the threat of striping a gear.
The drive train features a high specification MOD1 112T CNC helical primary gear and a helical cut MOD1 tail drive gear to enhance the gear mesh and lessen gear noise during flight.
A leading mounted ESC platform uses the primary blade air flow for effective ESC cooling.
The light-weight H-shaped electric device retention system offers defense, along with an ergonomically appropriate style to simplify operation.
The consisted of Align 750MX brushless motor features a ribbed case and fan to significantly increase cooling and enhance total power output.
The transmission features a streamlined style and permits basic disassembly.
The high quality tail transmission style, integrated with a double point mounted tail pitch control assembly helps to lessen slop and increase rudder control.
The high torque rated one way bearing base, bearing supported double push point rudder control style, high speed rated tail blade grip thrust bearings and a third bearing primary shaft assistance were consisted of to withstand the abuse of extreme 3D flight.
A pre-painted high grade fiberglass canopy uses 4 point anti-vibration mounting mechanism to allow effortless canopy setup. 

700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Diameter: 1562mm

Tail Rotor Diameter: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 104T

Tail Drive Gear: 22T

Drive Gear Ratio: 1:9.33:4.37

Weight (With Motor): 2900g

Consists of:

(1) T-REX 700E DFC Package
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(3) DS700H High Voltage Brushless Servo
(1) DS750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set

Had to Total:

7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) 2S Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge or Digital Pitch Gauge