Align T-REX 700E DFC Flybarless HV Super Combo Kit w/Motor, ESC, 4 HV

This is the Align T-REX 700E DFC Flybarless HV Super Combo Helicopter Package. This incredible package includes not just the T-REX 700E DFC Package, however likewise aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This set likewise includes an Align 530kV, 750MX brushless motor, a Castle Creations ICE2 HV 120 brushless ESC, 3 DS700 High Voltage Brushless digital cyclic servos and one DS750H High Voltage Brushless digital rudder servo. This extremely combo offers you with an unbelievable helicopter set and an equally excellent electronics and High Voltage package all in the exact same box.

700E DFC Features:

The Align 700E DFC helicopter is equipped with the low CG DFC rotor go to successfully reduce wind resistance throughout flight and supply the most direct and precise control feel back to the pilot, offering exhilarating 3D performance and unimaginable flight speed.
CCPM direct servo linkage design gets rid of the weight of a double push-pull linkage system, for quick reaction and precise control.
Integrated servo installs on the main shaft bearing blocks allow the cyclic servos to be mounted directly to the bearing blocks, and when integrated with the composite material frame plates, produces a clean and uncluttered appearance.
The frame utilizes an integrated composite carbon material method for ease of upkeep and high rigidity, while the increased front opening area enables basic battery installation.
The ingenious moving battery tray rails are inserted into the 3K side frames, with a trademarked spring filled locking mechanism permitting quick battery access in addition to battery defense.
A top mounted motor base brings the motor's center of mass better to the turning disc, enhancing 3D agility and enabling blade drafts to successfully cool the motor.
The motor mount system features a third bearing block to supply better motor shaft assistance, lowering torque shift and minimizing the danger of striping a gear.
The drive train features a high specification MOD1 112T CNC helical main gear and a helical cut MOD1 tail drive gear to improve the gear mesh and reduce gear noise throughout flight.
A top mounted ESC platform utilizes the main blade air flow for efficient ESC cooling.
The lightweight H-shaped electrical device retention system offers defense, in addition to an ergonomically correct design to streamline operation.
The consisted of Align 750MX brushless motor features a ribbed case and fan to considerably increase cooling and improve general power output.
The transmission features a streamlined design and permits basic disassembly.
The high quality tail gearbox design, integrated with a double point mounted tail pitch control assembly assists to reduce slop and boost rudder control.
The high torque ranked one way bearing base, bearing supported dual push point rudder control design, high speed ranked tail blade grip thrust bearings and a third bearing main shaft assistance were consisted of to stand up to the abuse of extreme 3D flight.
A pre-painted high grade fiberglass canopy utilizes 4 point anti-vibration mounting mechanism to allow simple and easy canopy installation. 

700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Diameter: 1562mm

Tail Rotor Diameter: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 104T

Tail Own Gear: 22T

Own Gear Ratio: 1:9.33:4.37

Weight (With Motor): 2900g

Includes:

(1) T-REX 700E DFC Package
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(3) DS700H High Voltage Brushless Servo
(1) DS750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set

Had to Complete:

7-channel or more helicopter radio system
(2) SIX Li-Po 4500 ~ 5200mAh
(1) 2S Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge or Digital Pitch Gauge