Align T-REX 700E DFC Flybarless HV Super Combo Kit w/Motor, ESC, 4 HV

This is the Align T-REX 700E DFC Flybarless HV Super Combo Helicopter Set. This incredible package includes not just the T-REX 700E DFC Set, but also aluminum and carbon fiber tail booms, a 690 3G carbon fiber blade set and a 105mm 3K carbon fiber tail blade set. This kit also includes an Align 530kV, 750MX brushless motor, a Castle Creations ICE2 HV 120 brushless ESC, 3 DS700 High Voltage Brushless digital cyclic servos and one DS750H High Voltage Brushless digital rudder servo. This super combination provides you with an unbelievable helicopter kit and an equally excellent electronic devices and High Voltage package all in the very same box.

700E DFC Functions:

The Align 700E DFC helicopter is geared up with the low CG DFC rotor go to successfully lower wind resistance during flight and offer the most direct and exact control feel back to the pilot, supplying exciting 3D efficiency and unimaginable flight speed.
CCPM direct servo linkage design eliminates the weight of a double push-pull linkage system, for quick reaction and exact control.
Integrated servo mounts on the main shaft bearing blocks permit the cyclic servos to be installed directly to the bearing blocks, when combined with the composite material frame plates, produces a tidy and uncluttered appearance.
The frame utilizes an integrated composite carbon material technique for ease of upkeep and high rigidity, while the increased front opening area permits simple battery setup.
The ingenious sliding battery tray rails are anchored into the 3K side frames, with a trademarked spring packed locking system permitting quick battery gain access to as well as battery protection.
A top installed motor base brings the motor's center of mass more detailed to the rotating disc, improving 3D agility and enabling blade drafts to successfully cool the motor.
The motor mount system features a third bearing block to offer enhanced motor shaft support, lowering torque shift and reducing the threat of striping an equipment.
The drive train features a high specification MOD1 112T CNC helical main gear and a helical cut MOD1 tail drive gear to enhance the gear mesh and reduce gear noise during flight.
A top installed ESC platform utilizes the main blade air flow for effective ESC cooling.
The lightweight H-shaped electric gadget retention system provides protection, as well as an ergonomically proper design to streamline operation.
The consisted of Align 750MX brushless motor features a ribbed case and fan to drastically increase cooling and enhance general power output.
The transmission features a structured design and allows simple disassembly.
The high quality tail transmission design, combined with a double point installed tail pitch control assembly helps to reduce slop and increase rudder control.
The high torque rated one method bearing base, bearing supported double push point rudder control design, high speed rated tail blade grip thrust bearings and a third bearing main shaft support were consisted of to stand up to the abuse of severe 3D flight.
A pre-painted high grade fiberglass canopy utilizes 4 point anti-vibration installing system to permit uncomplicated canopy setup. 

700E DFC Specifications:

Length: 1345mm

Height: 360mm

Width: 208mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Own Gear: 104T

Tail Own Gear: 22T

Own Gear Ratio: 1:9.33:4.37

Weight (With Motor): 2900g

Consists of:

(1) T-REX 700E DFC Set
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690 3G Carbon Fiber Blade Set
(1) 750MX Brushless Motor (530KV)
(3) DS700H High Voltage Brushless Servo
(1) DS750H High Voltage Brushless Servo


(1) Castle ICE2 HV 120 Brushless ESC
(1) 105mm 3K Carbon Fiber Tail Blade Set

Needed to Complete:

7-channel or more helicopter radio system
(2) 6S Li-Po 4500 ~ 5200mAh
(1) 2S Li-Po 1900 ~ 2300mAh
Dial Pitch Gauge or Digital Pitch Gauge