Align T-Rex 700E V2 3GX Flybarless Helicopter Super Combo Kit w/Motor

This is the Align T-Rex 700E V2 3GX Flybarless Helicopter Super Combination Package. This set consists of an Align 700MX 510kV motor, Castle ICE 2 HV 120 Brushless ESC, 3 Align DS610 Digital servo's, one DS650 Digital servo, 690mm 3G carbon fiber rotor blades, 105mm 3K tail blades, and the remarkable Align 3GX flybarless system.

700E V2 Functions:

Re-designed all metal primary blade control system, with removable primary rotor grips, to provide incredible rigidness and precision.
Wide +/- 15 degree pitch variety for exceptional 3D performance and explosive power.
Innovative moving battery tray rails are embedded into the 3K side frames and a trademarked spring packed locking system offers quick battery access and battery protection.
Laterally adjustable metal left/right control bellcrank arms and elevator control arms enable the most perfect endpoint travel change for the 3GX flybarless and basic flybar systems, while increasing servo resolution for enhanced control precision.
Includes CNC mod-1 helical primary equipment for the greatest load tolerance, lowest noise and enhanced durability.
Top installed motor base brings the motor's center of mass more detailed to the rotating disc, enhancing 3D dexterity and allowing blade drafts to cool the motor effectively.
A 3rd motor bearing block has been contributed to the side frame to make sure trueness of the motor shaft under severe radial force. This enhances the motor effectiveness and lifespan.
Top installed ESC platform to take benefit of primary blades airflow for reliable cooling.
New light-weight H-shaped electrical device retention system for security, as well as ergonomically right style to streamline operation.
Efficient shaft drive tail system.
3GX Features:

Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Changes original factory receiver)
Futaba S.BUS system assistance
Integrated in guv function
Compatible with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without making use of a PC
Compatible with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type recognition
700E V2 Requirements:

Length: 1328mm

Height: 408mm

Main Blade Length: 690mm

Main Rotor Diameter: 1562mm

Tail Rotor Diameter: 281mm

Motor Drive Equipment: 12T

Main Drive Equipment: 112T

Autorotation Tail Drive Equipment: 104T

Tail Drive Equipment: 24T

Drive Equipment Ratio: 1:9.33:4.33

Weight (w/Motor): 2830g

Flying Weight: Approximate. 4700g



3GX Requirements:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V

Consists of:

(1) T-REX 700E V2 3GX Package
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690mm 3G Carbon Fiber Blades
(3) Align DS610 Digital Servo Set

(1) Align DS650 Digital servo
(1) Align 3GX flybarless system
(1) Align 700MX 510kV motor
(1) Castle ICE 2 HV 120 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set
Needed to Complete:

Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
6S Li-Po 4500 ~ 5200mAh X2
Dial Pitch Gauge