Align T-Rex 700E V2 3GX Flybarless Helicopter Super Combo Kit w/Motor

This is the Align T-Rex 700E V2 3GX Flybarless Helicopter Super Combination Kit. This package includes an Align 700MX 510kV motor, Castle ICE 2 HV 120 Brushless ESC, 3 Align DS610 Digital servo's, one DS650 Digital servo, 690mm 3G carbon fiber rotor blades, 105mm 3K tail blades, and the amazing Align 3GX flybarless system.

700E V2 Features:

Re-designed all metal primary blade control system, with removable primary rotor grips, to supply amazing rigidness and precision.
Wide +/- 15 degree pitch range for exceptional 3D performance and explosive power.
Innovative sliding battery tray rails are embedded into the 3K side frames and a trademarked spring loaded locking system offers fast battery gain access to and battery protection.
Laterally adjustable metal left/right control bellcrank arms and elevator control arms enable the most ideal endpoint travel modification for the 3GX flybarless and standard flybar systems, while increasing servo resolution for enhanced control precision.
Includes CNC mod-1 helical primary equipment for the greatest load tolerance, lowest sound and enhanced durability.
Top installed motor base brings the motor's center of mass better to the turning disc, improving 3D dexterity and allowing blade drafts to cool the motor effectively.
A third motor bearing block has actually been added to the side frame to guarantee trueness of the motor shaft under extreme radial force. This improves the motor performance and lifespan.
Top installed ESC platform to take benefit of primary blades airflow for efficient cooling.
New lightweight H-shaped electric device retention system for protection, as well as ergonomically proper style to streamline operation.
Efficient shaft drive tail system.
3GX Features:

Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Replaces initial factory receiver)
Futaba S.BUS system assistance
Built in guv function
Compatible with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without using a PC
Compatible with 2 to 5 blades rotor heads
Support approximately 6 servos
Automatic servo type recognition
700E V2 Requirements:

Length: 1328mm

Height: 408mm

Main Blade Length: 690mm

Main Rotor Diameter: 1562mm

Tail Rotor Diameter: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 104T

Tail Drive Gear: 24T

Drive Gear Ratio: 1:9.33:4.33

Weight (w/Motor): 2830g

Flying Weight: Approx. 4700g



3GX Requirements:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Optimum working voltage: 8.5V

Includes:

(1) T-REX 700E V2 3GX Kit
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690mm 3G Carbon Fiber Blades
(3) Align DS610 Digital Servo Set

(1) Align DS650 Digital servo
(1) Align 3GX flybarless system
(1) Align 700MX 510kV motor
(1) Castle ICE 2 HV 120 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set
Had to Total:

Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX Li-Po 4500 ~ 5200mAh X2
Dial Pitch Gauge