Align T-Rex 700E V2 3GX Flybarless Helicopter Super Combo Kit w/Motor

This is the Align T-Rex 700E V2 3GX Flybarless Helicopter Super Combination Kit. This set consists of an Align 700MX 510kV motor, Castle ICE 2 HV 120 Brushless ESC, three Align DS610 Digital servo's, one DS650 Digital servo, 690mm 3G carbon fiber rotor blades, 105mm 3K tail blades, and the amazing Align 3GX flybarless system.

700E V2 Features:

Re-designed all metal main blade control system, with removable main rotor grips, to provide unbelievable rigidness and precision.
Wide +/- 15 degree pitch variety for exceptional 3D performance and explosive power.
Innovative moving battery tray rails are embedded into the 3K side frames and a trademarked spring packed latching system offers fast battery gain access to and battery protection.
Laterally adjustable metal left/right control bellcrank arms and elevator control arms enable the most ideal endpoint travel adjustment for the 3GX flybarless and basic flybar systems, while increasing servo resolution for enhanced control precision.
Includes CNC mod-1 helical main gear for the greatest load tolerance, least expensive noise and enhanced durability.
Top installed motor base brings the motor's center of mass closer to the rotating disc, enhancing 3D dexterity and allowing blade drafts to cool the motor effectively.
A 3rd motor bearing block has actually been contributed to the side frame to ensure trueness of the motor shaft under extreme radial force. This enhances the motor efficiency and lifespan.
Top installed ESC platform to take benefit of main blades airflow for efficient cooling.
New lightweight H-shaped electrical gadget retention system for defense, in addition to ergonomically right design to simplify operation.
Efficient shaft drive tail system.
3GX Characteristics:

Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Changes original factory receiver)
Futaba S.BUS system assistance
Built in governor function
Compatible with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without using a PC
Compatible with 2 to 5 blades rotor heads
Support approximately 6 servos
Automatic servo type acknowledgment
700E V2 Specifications:

Length: 1328mm

Height: 408mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Motor Drive Equipment: 12T

Main Drive Equipment: 112T

Autorotation Tail Own Equipment: 104T

Tail Own Equipment: 24T

Own Equipment Ratio: 1:9.33:4.33

Weight (w/Motor): 2830g

Flying Weight: Approximate. 4700g



3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V

Consists of:

(1) T-REX 700E V2 3GX Kit
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690mm 3G Carbon Fiber Blades
(3) Align DS610 Digital Servo Set

(1) Align DS650 Digital servo
(1) Align 3GX flybarless system
(1) Align 700MX 510kV motor
(1) Castle ICE 2 HV 120 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set
Had to Total:

Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX Li-Po 4500 ~ 5200mAh X2
Dial Pitch Gauge