Align T-Rex 700E V2 3GX Flybarless Helicopter Super Combo Kit w/Motor

This is the Align T-Rex 700E V2 3GX Flybarless Helicopter Super Combo Package. This kit consists of an Align 700MX 510kV motor, Castle ICE 2 HV 120 Brushless ESC, three Align DS610 Digital servo's, one DS650 Digital servo, 690mm 3G carbon fiber rotor blades, 105mm 3K tail blades, and the incredible Align 3GX flybarless system.

700E V2 Features:

Re-designed all metal primary blade control system, with detachable primary rotor grips, to supply incredible rigidness and precision.
Wide +/- 15 degree pitch range for superior 3D performance and explosive power.
Innovative sliding battery tray rails are embedded into the 3K side frames and a patented spring packed latching mechanism provides fast battery gain access to and battery protection.
Laterally adjustable metal left/right control bellcrank arms and elevator control arms enable the most ideal endpoint travel change for the 3GX flybarless and basic flybar systems, while increasing servo resolution for enhanced control precision.
Includes CNC mod-1 helical primary equipment for the greatest load tolerance, lowest sound and enhanced durability.
Top mounted motor base brings the motor's center of mass better to the rotating disc, improving 3D dexterity and allowing blade drafts to cool the motor effectively.
A third motor bearing block has been contributed to the side frame to make sure trueness of the motor shaft under extreme radial force. This enhances the motor efficiency and lifespan.
Top mounted ESC platform to take benefit of primary blades air flow for effective cooling.
New light-weight H-shaped electric device retention system for security, in addition to ergonomically correct design to streamline operation.
Efficient shaft drive tail system.
3GX Characteristics:

Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Changes initial factory receiver)
Futaba S.BUS system support
Built in governor function
Suitable with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without making use of a PC
Suitable with 2 to 5 blades rotor heads
Support as much as 6 servos
Automatic servo type acknowledgment
700E V2 Requirements:

Length: 1328mm

Height: 408mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 104T

Tail Drive Gear: 24T

Drive Gear Ratio: 1:9.33:4.33

Weight (w/Motor): 2830g

Flying Weight: Approximate. 4700g



3GX Requirements:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V

Consists of:

(1) T-REX 700E V2 3GX Package
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690mm 3G Carbon Fiber Blades
(3) Align DS610 Digital Servo Set

(1) Align DS650 Digital servo
(1) Align 3GX flybarless system
(1) Align 700MX 510kV motor
(1) Castle ICE 2 HV 120 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set
Had to Complete:

Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
6S Li-Po 4500 ~ 5200mAh X2
Dial Pitch Gauge