Align T-Rex 700E V2 3GX Flybarless Helicopter Super Combo Kit w/Motor

This is the Align T-Rex 700E V2 3GX Flybarless Helicopter Super Combination Set. This kit includes an Align 700MX 510kV motor, Castle ICE 2 HV 120 Brushless ESC, 3 Align DS610 Digital servo's, one DS650 Digital servo, 690mm 3G carbon fiber rotor blades, 105mm 3K tail blades, and the awesome Align 3GX flybarless system.

700E V2 Features:

Re-designed all metal primary blade control system, with detachable primary rotor grips, to provide extraordinary rigidity and precision.
Wide +/- 15 degree pitch range for superior 3D performance and explosive power.
Innovative moving battery tray rails are embedded into the 3K side frames and a trademarked spring packed latching mechanism supplies fast battery gain access to and battery protection.
Laterally adjustable metal left/right control bellcrank arms and elevator control arms make it possible for the most perfect endpoint travel modification for the 3GX flybarless and basic flybar systems, while increasing servo resolution for enhanced control precision.
Includes CNC mod-1 helical primary gear for the highest load tolerance, least expensive sound and enhanced durability.
Top installed motor base brings the motor's center of mass better to the rotating disc, enhancing 3D agility and permitting blade drafts to cool the motor effectively.
A third motor bearing block has actually been contributed to the side frame to ensure trueness of the motor shaft under extreme radial force. This improves the motor performance and lifespan.
Top installed ESC platform to take benefit of primary blades airflow for efficient cooling.
New light-weight H-shaped electrical gadget retention system for defense, in addition to ergonomically proper style to simplify operation.
Efficient shaft drive tail system.
3GX Features:

Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Changes initial factory receiver)
Futaba S.BUS system support
Built in guv function
Suitable with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without using a PC
Suitable with 2 to 5 blades rotor heads
Assistance up to 6 servos
Automatic servo type acknowledgment
700E V2 Requirements:

Length: 1328mm

Height: 408mm

Main Blade Length: 690mm

Main Rotor Diameter: 1562mm

Tail Rotor Diameter: 281mm

Motor Drive Equipment: 12T

Main Drive Equipment: 112T

Autorotation Tail Own Equipment: 104T

Tail Own Equipment: 24T

Own Equipment Ratio: 1:9.33:4.33

Weight (w/Motor): 2830g

Flying Weight: Approx. 4700g



3GX Requirements:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Optimum working voltage: 8.5V

Consists of:

(1) T-REX 700E V2 3GX Set
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690mm 3G Carbon Fiber Blades
(3) Line up DS610 Digital Servo Set

(1) Line up DS650 Digital servo
(1) Line up 3GX flybarless system
(1) Line up 700MX 510kV motor
(1) Castle ICE 2 HV 120 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set
Had to Total:

Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
SIX Li-Po 4500 ~ 5200mAh X2
Dial Pitch Gauge