Align T-Rex 700E V2 3GX Flybarless Helicopter Super Combo Kit w/Motor

This is the Align T-Rex 700E V2 3GX Flybarless Helicopter Super Combo Set. This package includes an Align 700MX 510kV motor, Castle ICE 2 HV 120 Brushless ESC, 3 Align DS610 Digital servo's, one DS650 Digital servo, 690mm 3G carbon fiber rotor blades, 105mm 3K tail blades, and the remarkable Align 3GX flybarless system.

700E V2 Features:

Re-designed all metal primary blade control system, with detachable primary rotor grips, to offer extraordinary rigidity and precision.
Wide +/- 15 degree pitch range for superior 3D efficiency and explosive power.
Innovative sliding battery tray rails are embedded into the 3K side frames and a trademarked spring filled locking mechanism provides quick battery gain access to and battery protection.
Laterally adjustable metal left/right control bellcrank arms and elevator control arms make it possible for the most ideal endpoint travel adjustment for the 3GX flybarless and standard flybar systems, while increasing servo resolution for enhanced control precision.
Includes CNC mod-1 helical primary equipment for the greatest load tolerance, least expensive sound and enhanced durability.
Top mounted motor base brings the motor's center of gravity better to the rotating disc, improving 3D agility and allowing blade drafts to cool the motor effectively.
A 3rd motor bearing block has been contributed to the side frame to make sure trueness of the motor shaft under extreme radial force. This enhances the motor efficiency and lifespan.
Top mounted ESC platform to take advantage of primary blades airflow for efficient cooling.
New light-weight H-shaped electrical gadget retention system for protection, along with ergonomically correct design to streamline operation.
Efficient shaft drive tail system.
3GX Features:

Supports Wide/Narrow Bandwidth Digital and brushless servos
Spektrum and JR Satellite antennas support (Changes original factory receiver)
Futaba S.BUS system assistance
Built in guv function
Suitable with 1024/2048 resolution Spektrum receivers
Supports 90/120/135/140 CCPM swashplates
Field setup without the use of a PC
Suitable with 2 to 5 blades rotor heads
Assistance up to 6 servos
Automatic servo type recognition
700E V2 Specs:

Length: 1328mm

Height: 408mm

Main Blade Length: 690mm

Main Rotor Size: 1562mm

Tail Rotor Size: 281mm

Motor Drive Gear: 12T

Main Drive Gear: 112T

Autorotation Tail Drive Gear: 104T

Tail Drive Gear: 24T

Drive Gear Ratio: 1:9.33:4.33

Weight (w/Motor): 2830g

Flying Weight: Approx. 4700g



3GX Specs:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V

Consists of:

(1) T-REX 700E V2 3GX Set
(1) Aluminum Tail Boom
(1) 3K Carbon Fiber Tail Boom
(1) 690mm 3G Carbon Fiber Blades
(3) Align DS610 Digital Servo Set

(1) Align DS650 Digital servo
(1) Align 3GX flybarless system
(1) Align 700MX 510kV motor
(1) Castle ICE 2 HV 120 Brushless ESC
(1) 6A External BEC w/ 5.1V Two-way Step-down voltage regulator
(1) 105mm 3K Carbon Fiber Tail Blade Set
Needed to Total:

Transmitter (7-channel or more, helicopter system)
Receiver (7-channel or more)
6S Li-Po 4500 ~ 5200mAh X2
Dial Pitch Gauge