Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combination Helicopter Set. This incredible package consists of not only the T-REX 600N DFC Set, however likewise a set of 600 3G Carbon Fiber blades, a governor sensor, a 2-1 voltage regulator, three DS615 standard servos, one DS655 specialized servo, and obviously the 3GX flybarless system. This extremely combo set offers you with an extraordinary helicopter set and an equally outstanding electronic devices package all in the same box.

T-REX 600N DFC Features: Equipped with the DFC flybarless head assembly, with incredibly low CG style to minimize wind resistance, supplying a more direct and accurate flight control response and greater top speed.
Double 3K carbon plate side frame style for ease of upkeep and resistance to torque caused flex.
Additional radial bearing is added to the top of the primary gear center to make sure stable rotation, and get rid of jamming of one method bearing.
Upgraded stainless steel tail drive gear center mount, for more accurate tail drive gear and greater tolerance.
High quality carbon rudder control rod assembly, utilizing 5mm carbon rod and metal ports, leading to enhanced rudder control precision.
Upgraded torque tube front and rear drive gear set, makes use of greatest specification and remarkable anti-wear material to increase the general strength and durability. Effectively minimize gear striping and crash damage.
High quality tail transmission style, combined with dual point installed tail pitch control assembly to minimize slop and boost rudder control precision.
Makes use of high effective tail drive system.
High speed rated thrust bearing in tail blade grips.
High performance tail shaft drive style.
Highly effective lightened engine cooling fan, lowering engine load and improving cooling performance.
Large diameter clutch system with distinct installation approach for excellent balance, minimal vibration, and reliable power transfer.
Forward installed rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder response and outstanding tail locking ability.
Unique H formed cross section installing platform for easy electronic installing and protection.
Large capacity 440CC fuel tank for approximately 10 minutes of severe 3D flights.
Starting and clutch support point makes use of 10mm one method bearing.
Ready to fly dry weight is only 3200g (7lbs).
Main fuel tank created with fuel supply stabilization impact.
Effect resistant fiberglass canopy with 3 point hook installing system for ease of install and elimination.
Designed with principles from big helicopter competitors, for the very best fixed and dynamic flight performance.

3GX Characteristics:

Upgraded 3GX represents the next generation of multi function flybarless systems. The considerably enhanced performance will develop an instant effect on any lovers.
The 3GX is currently the tiniest and lightest flybarless system on the market and includes 2 ports to straight connect Spektrum and JR satellite receivers, in addition to complete support of Futaba's S-BUS system.
Using the 3G FL760 manual setup procedure, the 3GX can be setup just in a matter of minutes. Additionally, the 3GX can support any CCPM swashplate system currently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically detailed directions utilizing the computer setup software application directs the user through a step by step setup procedure, allowing for quick setups without omitting any actions.
With the soon to be launched Bluetooth connectivity set, the 3GX can be configured wirelessly from a PC. Eventually there will likewise be smartphone apps allowing live changes to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is required, lowering electronic clutter and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, allowing pilots to achieve the most optimum setup for their helicopter without the guesswork.
Three levels of flight mode are available to supply the ideal feel for newbie and advanced pilots.
Custom specifications have actually been established to permit pilots to tweak numerous swashplate and rudder settings and a settings export feature permits customized settings to be shared among good friends.
The 3GX includes the greatest spec gyroscope sensors, allowing it to be utilized in the harshest conditions. The dual axis plus rudder sensor considerably enhances swashplate and rudder correction precision and will be felt when hovering, along with during aerobatic regimens.
Ideal for 200 to 800 class helicopters, radiance engine or electric powered.
The vibration resistant characteristics appear even when installed with more difficult double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, in addition to completely re-written firmware. The outcome is a dramatic enhancement in stability that rivals a flybarred helicopter, while supplying explosive dexterity.
With an integrated in pirouette settlement function, the 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly carried out with precision.
Rudder control resembles the high-end GP-780 gyro in that the rudder sensitivity is enhanced for the helicopter's rudder response characteristics, allowing constant rudder feel even under high speed conditions. This outstanding control feel will permit pilots of all skill levels to experience the ideal combination in between the 3GX and the helicopter.
Additional peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system makes use of a total of 10 sensors making sure positioning of the helicopter with remarkable precision and supplying the supreme option for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type recognition

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Size: 1350mm

Tail Rotor Size: 240mm

Engine Pinion Gear: 20T

Main Drive Gear: 170T

Autorotation Tail Drive Gear: 180T

Drive Gear Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V 

Consists of:

(1) T-REX 600N DFC Set
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Requirement Servo
(1) DS655 Specialized Servo
(1) Guv Sensing unit


(1) B6T 2-in-1 Voltage Regulator

Needed To Total: 7-channel Helicopter Radio System (Minimum)


(1) Basic Throttle Servo


(1) Engine Starter
(1) Digital Pitch Gauge
(1) Line up 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel