Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combination Helicopter Set. This incredible package consists of not only the T-REX 600N DFC Set, however likewise a set of 600 3G Carbon Fiber blades, a guv sensor, a 2-1 voltage regulator, 3 DS615 standard servos, one DS655 specialized servo, and of course the 3GX flybarless system. This extremely combination package provides you with an unbelievable helicopter package and an equally remarkable electronics package all in the very same box.

T-REX 600N DFC Functions: Geared up with the DFC flybarless head assembly, with extremely low CG design to reduce wind resistance, supplying a more direct and precise flight control reaction and higher top speed.
Double 3K carbon plate side frame design for ease of maintenance and resistance to torque caused flex.
Additional radial bearing is contributed to the top of the primary equipment center to ensure steady rotation, and remove jamming of one way bearing.
Redesigned stainless steel tail drive equipment center mount, for more precise tail drive equipment and higher tolerance.
High quality carbon rudder control rod assembly, utilizing 5mm carbon rod and metal adapters, leading to enhanced rudder control precision.
Redesigned torque tube front and rear drive equipment set, utilizes highest specification and superior anti-wear material to increase the general strength and resilience. Effectively reduce equipment striping and crash damage.
High quality tail transmission design, integrated with dual point mounted tail pitch control assembly to reduce slop and boost rudder control precision.
Utilizes high efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
High performance tail shaft drive design.
Extremely efficient lightened engine cooling fan, minimizing engine load and improving cooling performance.
Big size clutch system with unique setup technique for great balance, very little vibration, and efficient power transfer.
Forward mounted rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder reaction and outstanding tail locking capability.
Distinct H formed cross section installing platform for easy electronic installing and defense.
Big capacity 440CC fuel tank for up to 10 minutes of severe 3D flights.
Starting and clutch support point utilizes 10mm one way bearing.
Ready to fly dry weight is only 3200g (7lbs).
Main fuel tank created with fuel supply stabilization impact.
Impact resistant fiberglass canopy with 3 point hook installing system for ease of install and removal.
Designed with ideas from large helicopter competitors, for the best static and vibrant flight efficiency.

3GX Characteristics:

Redesigned 3GX represents the next generation of multi function flybarless systems. The drastically enhanced efficiency will develop an instant effect on any lovers.
The 3GX is currently the tiniest and lightest flybarless system on the marketplace and features 2 ports to directly connect Spektrum and JR satellite receivers, together with complete support of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup process, the 3GX can be setup merely in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system currently on the marketplace consisting of 90, 120, 135, and 140 degree swashplates.
Graphically illustrated instructions utilizing the computer system setup software directs the user through an action by step setup process, allowing for quick setups without omitting any steps.
With the quickly to be released Bluetooth connectivity package, the 3GX can be programmed wirelessly from a PC. Eventually there will likewise be smartphone apps enabling live adjustments to the 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is needed, minimizing electronic mess and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, enabling pilots to attain the most ideal setup for their helicopter without the uncertainty.
3 levels of flight mode are offered to offer the best feel for novice and advanced pilots.
Custom-made parameters have been developed to enable pilots to tweak various swashplate and rudder settings and a settings export feature allows customized settings to be shared among pals.
The 3GX features the highest spec gyroscope sensing units, enabling it to be utilized in the harshest conditions. The dual axis plus rudder sensor drastically improves swashplate and rudder correction precision and will be felt when hovering, as well as throughout aerobatic routines.
Appropriate for 200 to 800 class helicopters, radiance engine or electrical powered.
The vibration resistant qualities appear even when mounted with harder double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, together with totally re-written firmware. The result is a remarkable enhancement in stability that rivals a flybarred helicopter, while supplying explosive agility.
With an integrated in pirouette compensation function, the 3GX has the ability to support the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly performed with precision.
Rudder control resembles the high end GP-780 gyro because the rudder level of sensitivity is optimized for the helicopter's rudder reaction qualities, enabling consistent rudder feel even under high speed conditions. This outstanding control feel will enable pilots of all ability levels to experience the best integration in between the 3GX and the helicopter.
Additional peripherals prepared for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system utilizes an overall of 10 sensing units guaranteeing positioning of the helicopter with superior accuracy and supplying the supreme service for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Support up to 6 servos
Automatic servo type recognition

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Size: 1350mm

Tail Rotor Size: 240mm

Engine Pinion Gear: 20T

Main Drive Gear: 170T

Autorotation Tail Drive Gear: 180T

Drive Gear Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V 

Consists of:

(1) T-REX 600N DFC Set
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Standard Servo
(1) DS655 Specialized Servo
(1) Guv Sensor


(1) B6T 2-in-1 Voltage Regulator

Had to Total: 7-channel Helicopter Radio System (Minimum)


(1) Basic Throttle Servo


(1) Engine Beginner
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel