Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combo Helicopter Kit. This extraordinary package consists of not just the T-REX 600N DFC Kit, however likewise a set of 600 3G Carbon Fiber blades, a guv sensing unit, a 2-1 voltage regulator, 3 DS615 standard servos, one DS655 specialized servo, and obviously the 3GX flybarless system. This extremely combo set offers you with an extraordinary helicopter set and an equally impressive electronic devices package all in the same box.

T-REX 600N DFC Functions: Geared up with the DFC flybarless head assembly, with incredibly low CG design to reduce wind resistance, providing a more direct and exact flight control reaction and higher top speed.
Double 3K carbon plate side frame design for ease of maintenance and resistance to torque caused flex.
Additional radial bearing is contributed to the top of the main gear center to guarantee stable rotation, and remove jamming of one method bearing.
Redesigned stainless steel tail drive gear center install, for more exact tail drive gear and higher tolerance.
High quality carbon rudder control rod assembly, utilizing 5mm carbon rod and metal adapters, leading to improved rudder control precision.
Redesigned torque tube front and rear drive gear set, utilizes highest specification and exceptional anti-wear product to increase the total strength and sturdiness. Successfully reduce gear striping and crash damage.
High quality tail gearbox design, integrated with double point installed tail pitch control assembly to reduce slop and increase rudder control precision.
Uses high efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
High effectiveness tail shaft drive design.
Highly efficient lightened engine cooling fan, reducing engine load and improving cooling effectiveness.
Big size clutch system with distinct installation technique for good balance, minimal vibration, and efficient power transfer.
Forward installed rudder servo to safeguard it from exhaust contamination.
95mm tail blades for sharp rudder reaction and exceptional tail locking capability.
Distinct H shaped random sample installing platform for simple electronic installing and security.
Big capability 440CC fuel tank for as much as 10 minutes of extreme 3D flights.
Starting and clutch support point utilizes 10mm one method bearing.
All set to fly dry weight is just 3200g (7lbs).
Main fuel tank designed with fuel supply stabilization result.
Effect resistant fiberglass canopy with 3 point hook installing system for ease of set up and removal.
Designed with principles from big helicopter competitors, for the best static and dynamic flight efficiency.

3GX Characteristics:

Redesigned 3GX represents the next generation of multi function flybarless systems. The dramatically improved efficiency will create an instant impact on any lovers.
The 3GX is currently the smallest and lightest flybarless system on the market and includes 2 ports to directly link Spektrum and JR satellite receivers, along with complete support of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup process, the 3GX can be setup simply in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system currently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically detailed guidelines utilizing the computer setup software application directs the user through an action by action setup process, permitting fast setups without omitting any steps.
With the quickly to be released Bluetooth connection set, the 3GX can be set wirelessly from a PC. Ultimately there will likewise be smartphone apps allowing live modifications to the 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is required, reducing electronic clutter and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, allowing pilots to accomplish the most optimal setup for their helicopter without the uncertainty.
3 levels of flight mode are available to supply the perfect feel for beginner and advanced pilots.
Custom specifications have been developed to permit pilots to tweak many swashplate and rudder settings and a settings export feature allows custom settings to be shared among good friends.
The 3GX includes the highest spec gyroscope sensors, allowing it to be used in the harshest conditions. The double axis plus rudder sensing unit dramatically enhances swashplate and rudder correction precision and will be felt when hovering, as well as during aerobatic regimens.
Appropriate for 200 to 800 class helicopters, glow engine or electric powered.
The vibration resistant characteristics are evident even when installed with more difficult double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, along with completely re-written firmware. The outcome is a dramatic improvement in stability that rivals a flybarred helicopter, while providing explosive agility.
With a built in pirouette settlement function, the 3GX has the ability to support the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip kind of maneuvers are easily carried out with precision.
Rudder control resembles the luxury GP-780 gyro because the rudder sensitivity is enhanced for the helicopter's rudder reaction characteristics, allowing constant rudder feel even under high speed conditions. This exceptional control feel will permit pilots of all ability levels to experience the perfect integration in between the 3GX and the helicopter.
Additional peripherals prepared for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system utilizes an overall of 10 sensors ensuring positioning of the helicopter with exceptional accuracy and providing the supreme solution for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Assistance as much as 6 servos
Automatic servo type acknowledgment

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Size: 1350mm

Tail Rotor Size: 240mm

Engine Pinion Equipment: 20T

Main Drive Equipment: 170T

Autorotation Tail Own Equipment: 180T

Own Equipment Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V 

Consists of:

(1) T-REX 600N DFC Kit
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Requirement Servo
(1) DS655 Specialized Servo
(1) Governor Sensing unit


(1) B6T 2-in-1 Voltage Regulator

Had to Total: 7-channel Helicopter Radio System (Minimum)


(1) Standard Throttle Servo


(1) Engine Starter
(1) Digital Pitch Gauge
(1) Line up 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel