Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combination Helicopter Package. This unbelievable plan includes not only the T-REX 600N DFC Package, however likewise a pair of 600 3G Carbon Fiber blades, a guv sensor, a 2-1 voltage regulator, 3 DS615 standard servos, one DS655 specialized servo, and of course the 3GX flybarless system. This very combo kit provides you with an amazing helicopter kit and an equally impressive electronic devices plan all in the exact same box.

T-REX 600N DFC Features: Geared up with the DFC flybarless head assembly, with exceptionally low CG style to reduce wind resistance, offering a more direct and precise flight control action and greater top speed.
Double 3K carbon plate side frame style for ease of upkeep and resistance to torque caused flex.
Extra radial bearing is added to the top of the main equipment center to make sure steady rotation, and eliminate jamming of one way bearing.
Upgraded stainless steel tail drive equipment center mount, for more precise tail drive equipment and greater tolerance.
High quality carbon rudder control rod assembly, using 5mm carbon rod and metal adapters, leading to improved rudder control accuracy.
Upgraded torque tube front and rear drive equipment set, utilizes greatest spec and remarkable anti-wear material to increase the total strength and toughness. Successfully reduce equipment striping and crash damage.
High quality tail transmission style, combined with dual point mounted tail pitch control assembly to reduce slop and increase rudder control accuracy.
Uses high efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
High efficiency tail shaft drive style.
Extremely efficient lightened engine cooling fan, reducing engine load and enhancing cooling efficiency.
Big size clutch system with distinct installation approach for good balance, very little vibration, and effective power transfer.
Forward mounted rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder action and outstanding tail locking ability.
Special H formed cross section mounting platform for simple electronic mounting and protection.
Big capability 440CC fuel tank for up to 10 minutes of severe 3D flights.
Beginning and clutch support point utilizes 10mm one way bearing.
All set to fly dry weight is only 3200g (7lbs).
Main fuel tank designed with fuel supply stabilization result.
Effect resistant fiberglass canopy with 3 point hook mounting system for ease of set up and removal.
Developed with ideas from large helicopter competitors, for the very best fixed and dynamic flight performance.

3GX Features:

Upgraded 3GX represents the next generation of multi function flybarless systems. The considerably improved performance will create an instant effect on any enthusiasts.
The 3GX is currently the smallest and lightest flybarless system on the market and includes 2 ports to directly connect Spektrum and JR satellite receivers, together with complete support of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup simply in a matter of minutes. Additionally, the 3GX can support any CCPM swashplate system currently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically detailed directions using the computer system setup software application directs the user through a step by action setup process, permitting quick setups without leaving out any steps.
With the quickly to be released Bluetooth connection kit, the 3GX can be configured wirelessly from a PC. Eventually there will likewise be smartphone apps allowing live changes to the 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is needed, reducing electronic mess and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, allowing pilots to accomplish the most ideal setup for their helicopter without the uncertainty.
3 levels of flight mode are available to offer the best feel for beginner and advanced pilots.
Custom parameters have been developed to enable pilots to fine tune numerous swashplate and rudder settings and a settings export function enables custom settings to be shared amongst buddies.
The 3GX includes the greatest spec gyroscope sensors, allowing it to be utilized in the harshest conditions. The dual axis plus rudder sensor considerably enhances swashplate and rudder correction accuracy and will be felt when hovering, along with during aerobatic regimens.
Suitable for 200 to 800 class helicopters, glow engine or electrical powered.
The vibration resistant characteristics appear even when mounted with more difficult double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, together with entirely re-written firmware. The outcome is a remarkable improvement in stability that rivals a flybarred helicopter, while offering explosive dexterity.
With a built in pirouette payment function, the 3GX is able to stabilize the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with accuracy.
Rudder control is similar to the high-end GP-780 gyro in that the rudder sensitivity is enhanced for the helicopter's rudder action characteristics, allowing consistent rudder feel even under high speed conditions. This outstanding control feel will enable pilots of all ability levels to experience the best combination between the 3GX and the helicopter.
Extra peripherals prepared for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system utilizes a total of 10 sensors ensuring positioning of the helicopter with remarkable accuracy and offering the ultimate solution for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Assistance up to 6 servos
Automatic servo type acknowledgment

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Diameter: 1350mm

Tail Rotor Diameter: 240mm

Engine Pinion Gear: 20T

Main Drive Gear: 170T

Autorotation Tail Drive Gear: 180T

Drive Gear Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V 

Includes:

(1) T-REX 600N DFC Package
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Standard Servo
(1) DS655 Specialized Servo
(1) Guv Sensing unit


(1) B6T 2-in-1 Voltage Regulator

Needed To Total: 7-channel Helicopter Radio System (Minimum)


(1) Basic Throttle Servo


(1) Engine Beginner
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel