Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combination Helicopter Set. This amazing plan consists of not just the T-REX 600N DFC Set, but likewise a set of 600 3G Carbon Fiber blades, a governor sensor, a 2-1 voltage regulator, three DS615 standard servos, one DS655 specialized servo, and naturally the 3GX flybarless system. This very combo package supplies you with an incredible helicopter package and an equally outstanding electronics plan all in the same box.

T-REX 600N DFC Functions: Equipped with the DFC flybarless head assembly, with exceptionally low CG design to minimize wind resistance, providing a more direct and exact flight control action and higher leading speed.
Double 3K carbon plate side frame design for ease of upkeep and resistance to torque induced flex.
Extra radial bearing is contributed to the top of the main gear center to ensure stable rotation, and get rid of jamming of one way bearing.
Revamped stainless-steel tail drive gear center install, for more exact tail drive gear and higher tolerance.
High quality carbon rudder control rod assembly, using 5mm carbon rod and metal connectors, resulting in enhanced rudder control accuracy.
Revamped torque tube front and rear drive gear set, makes use of greatest specification and remarkable anti-wear material to increase the general strength and durability. Effectively minimize gear striping and crash damage.
High quality tail transmission design, combined with dual point mounted tail pitch control assembly to minimize slop and boost rudder control accuracy.
Makes use of high efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
High effectiveness tail shaft drive design.
Highly efficient lightened engine cooling fan, minimizing engine load and enhancing cooling effectiveness.
Big size clutch system with distinct installation technique for great balance, very little vibration, and effective power transfer.
Forward mounted rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder action and excellent tail locking ability.
Special H shaped cross section mounting platform for simple electronic mounting and protection.
Big capability 440CC fuel tank for approximately 10 minutes of extreme 3D flights.
Beginning and clutch support point makes use of 10mm one way bearing.
Prepared to fly dry weight is just 3200g (7lbs).
Main fuel tank developed with fuel supply stabilization result.
Effect resistant fiberglass canopy with 3 point hook mounting system for ease of set up and removal.
Designed with concepts from big helicopter competitions, for the best fixed and dynamic flight efficiency.

3GX Characteristics:

Revamped 3GX represents the next generation of multi function flybarless systems. The drastically enhanced efficiency will create an immediate influence on any lovers.
The 3GX is presently the tiniest and lightest flybarless system on the market and features 2 ports to straight link Spektrum and JR satellite receivers, along with complete support of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup merely in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system presently on the market including 90, 120, 135, and 140 degree swashplates.
Graphically detailed guidelines using the computer system setup software directs the user through an action by action setup process, allowing for quick setups without leaving out any steps.
With the soon to be released Bluetooth connection package, the 3GX can be set wirelessly from a PC. Eventually there will likewise be smartphone apps permitting live modifications to the 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is required, minimizing electronic mess and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, permitting pilots to attain the most optimum setup for their helicopter without the guesswork.
3 levels of flight mode are readily available to supply the best feel for novice and advanced pilots.
Custom parameters have been developed to enable pilots to fine tune various swashplate and rudder settings and a settings export feature allows customized settings to be shared among friends.
The 3GX features the greatest spec gyroscope sensors, permitting it to be utilized in the harshest conditions. The dual axis plus rudder sensor drastically enhances swashplate and rudder correction accuracy and will be felt when hovering, in addition to throughout aerobatic regimens.
Suitable for 200 to 800 class helicopters, glow engine or electrical powered.
The vibration resistant attributes are evident even when mounted with more difficult double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, along with entirely re-written firmware. The outcome is a remarkable enhancement in stability that matches a flybarred helicopter, while providing explosive dexterity.
With a built in pirouette compensation function, the 3GX has the ability to support the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with accuracy.
Rudder control resembles the high end GP-780 gyro because the rudder level of sensitivity is optimized for the helicopter's rudder action attributes, permitting consistent rudder feel even under high speed conditions. This excellent control feel will enable pilots of all skill levels to experience the best integration between the 3GX and the helicopter.
Extra peripherals prepared for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system makes use of a total of 10 sensors guaranteeing positioning of the helicopter with remarkable accuracy and providing the ultimate service for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type acknowledgment

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Size: 1350mm

Tail Rotor Size: 240mm

Engine Pinion Gear: 20T

Main Drive Gear: 170T

Autorotation Tail Drive Gear: 180T

Drive Gear Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Operating Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Optimum working voltage: 8.5V 

Consists of:

(1) T-REX 600N DFC Set
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Standard Servo
(1) DS655 Specialized Servo
(1) Guv Sensor


(1) B6T 2-in-1 Voltage Regulator

Had to Total: 7-channel Helicopter Radio System (Minimum)


(1) Standard Throttle Servo


(1) Engine Beginner
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel