Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combo Helicopter Kit. This amazing package includes not only the T-REX 600N DFC Kit, but likewise a pair of 600 3G Carbon Fiber blades, a guv sensor, a 2-1 voltage regulator, three DS615 standard servos, one DS655 specialized servo, and naturally the 3GX flybarless system. This extremely combo package provides you with an incredible helicopter package and a similarly remarkable electronic devices package all in the very same box.

T-REX 600N DFC Functions: Equipped with the DFC flybarless head assembly, with extremely low CG design to decrease wind resistance, supplying a more direct and accurate flight control response and higher top speed.
Double 3K carbon plate side frame design for ease of maintenance and resistance to torque caused flex.
Extra radial bearing is added to the top of the main equipment center to guarantee stable rotation, and get rid of jamming of one way bearing.
Revamped stainless-steel tail drive equipment center install, for more accurate tail drive equipment and higher tolerance.
High quality carbon rudder control rod assembly, utilizing 5mm carbon rod and metal ports, resulting in enhanced rudder control precision.
Revamped torque tube front and rear drive equipment set, uses greatest specification and superior anti-wear material to increase the overall strength and toughness. Effectively decrease equipment striping and crash damage.
High quality tail gearbox design, integrated with dual point installed tail pitch control assembly to decrease slop and increase rudder control precision.
Utilizes high efficient tail drive system.
High speed ranked thrust bearing in tail blade grips.
High effectiveness tail shaft drive design.
Extremely efficient lightened engine cooling fan, decreasing engine load and enhancing cooling effectiveness.
Big diameter clutch system with unique installation technique for good balance, minimal vibration, and reliable power transfer.
Forward installed rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder response and outstanding tail locking ability.
Distinct H shaped cross section installing platform for easy electronic installing and defense.
Big capability 440CC fuel tank for as much as 10 minutes of severe 3D flights.
Beginning and clutch support point uses 10mm one way bearing.
Prepared to fly dry weight is only 3200g (7lbs).
Main fuel tank created with fuel supply stabilization effect.
Effect resistant fiberglass canopy with 3 point hook installing system for ease of install and removal.
Developed with principles from big helicopter competitions, for the best fixed and vibrant flight efficiency.

3GX Features:

Revamped 3GX represents the next generation of multi function flybarless systems. The considerably enhanced efficiency will create an immediate effect on any enthusiasts.
The 3GX is currently the tiniest and lightest flybarless system on the market and includes two ports to straight connect Spektrum and JR satellite receivers, together with full support of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup just in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system currently on the market consisting of 90, 120, 135, and 140 degree swashplates.
Graphically illustrated directions utilizing the computer system setup software directs the user through a step by action setup process, allowing for quick setups without leaving out any steps.
With the quickly to be released Bluetooth connection package, the 3GX can be configured wirelessly from a PC. Eventually there will likewise be smartphone apps allowing live modifications to the 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is needed, decreasing electronic clutter and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, allowing pilots to attain the most ideal setup for their helicopter without the guesswork.
3 levels of flight mode are offered to offer the ideal feel for novice and advanced pilots.
Custom-made parameters have been developed to enable pilots to fine tune numerous swashplate and rudder settings and a settings export function enables custom-made settings to be shared amongst friends.
The 3GX includes the greatest spec gyroscope sensors, allowing it to be used in the harshest conditions. The dual axis plus rudder sensor considerably enhances swashplate and rudder correction precision and will be felt when hovering, as well as throughout aerobatic routines.
Appropriate for 200 to 800 class helicopters, radiance engine or electrical powered.
The vibration resistant characteristics appear even when installed with harder double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, together with entirely re-written firmware. The outcome is a significant enhancement in stability that equals a flybarred helicopter, while supplying explosive dexterity.
With a built in pirouette compensation function, the 3GX is able to support the helicopter on a fixed point throughout pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly carried out with precision.
Rudder control is similar to the luxury GP-780 gyro because the rudder sensitivity is enhanced for the helicopter's rudder response characteristics, allowing consistent rudder feel even under high speed conditions. This outstanding control feel will enable pilots of all ability levels to experience the ideal integration between the 3GX and the helicopter.
Extra peripherals planned for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system uses a total of 10 sensors ensuring positioning of the helicopter with superior accuracy and supplying the ultimate service for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance as much as 6 servos
Automatic servo type acknowledgment

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Size: 1350mm

Tail Rotor Size: 240mm

Engine Pinion Equipment: 20T

Main Drive Equipment: 170T

Autorotation Tail Drive Equipment: 180T

Drive Equipment Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Optimum working voltage: 8.5V 

Consists of:

(1) T-REX 600N DFC Kit
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Requirement Servo
(1) DS655 Specialized Servo
(1) Governor Sensing unit


(1) B6T 2-in-1 Voltage Regulator

Had to Complete: 7-channel Helicopter Radio System (Minimum)


(1) Basic Throttle Servo


(1) Engine Starter
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel