Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combo Helicopter Kit. This extraordinary plan consists of not only the T-REX 600N DFC Kit, however likewise a set of 600 3G Carbon Fiber blades, a guv sensing unit, a 2-1 voltage regulator, three DS615 basic servos, one DS655 specialized servo, and of course the 3GX flybarless system. This incredibly combination set provides you with an amazing helicopter set and a similarly remarkable electronic devices plan all in the exact same box.

T-REX 600N DFC Functions: Equipped with the DFC flybarless head assembly, with incredibly low CG style to lessen wind resistance, providing a more direct and accurate flight control response and greater top speed.
Dual 3K carbon plate side frame style for ease of upkeep and resistance to torque caused flex.
Additional radial bearing is contributed to the top of the primary equipment center to make sure stable rotation, and get rid of jamming of one way bearing.
Revamped stainless steel tail drive equipment center mount, for more accurate tail drive equipment and greater tolerance.
High quality carbon rudder control rod assembly, using 5mm carbon rod and metal ports, leading to improved rudder control accuracy.
Revamped torque tube front and rear drive equipment set, utilizes highest specification and superior anti-wear material to increase the total strength and durability. Effectively lessen equipment striping and crash damage.
High quality tail transmission style, combined with dual point mounted tail pitch control assembly to lessen slop and increase rudder control accuracy.
Utilizes high effective tail drive system.
High speed rated thrust bearing in tail blade grips.
High efficiency tail shaft drive style.
Highly effective lightened engine cooling fan, lowering engine load and enhancing cooling efficiency.
Big diameter clutch system with distinct installation technique for great balance, very little vibration, and efficient power transfer.
Forward mounted rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder response and excellent tail locking ability.
Special H shaped sample mounting platform for easy electronic mounting and defense.
Big capacity 440CC fuel tank for approximately 10 minutes of severe 3D flights.
Beginning and clutch assistance point utilizes 10mm one way bearing.
Ready to fly dry weight is only 3200g (7lbs).
Main fuel tank created with fuel supply stabilization result.
Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install and elimination.
Created with principles from big helicopter competitions, for the very best static and vibrant flight efficiency.

3GX Features:

Revamped 3GX represents the next generation of multi function flybarless systems. The drastically improved efficiency will create an immediate influence on any enthusiasts.
The 3GX is presently the smallest and lightest flybarless system on the marketplace and includes 2 ports to directly connect Spektrum and JR satellite receivers, along with full assistance of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup process, the 3GX can be setup simply in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system presently on the marketplace consisting of 90, 120, 135, and 140 degree swashplates.
Graphically illustrated directions using the computer system setup software directs the user through a step by step setup process, enabling quick setups without omitting any actions.
With the quickly to be released Bluetooth connectivity set, the 3GX can be configured wirelessly from a PC. Eventually there will likewise be smartphone apps allowing live changes to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is needed, lowering electronic clutter and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, allowing pilots to achieve the most optimum setup for their helicopter without the uncertainty.
3 levels of flight mode are readily available to provide the best feel for beginner and advanced pilots.
Custom criteria have actually been established to enable pilots to tweak numerous swashplate and rudder settings and a settings export function enables custom-made settings to be shared amongst good friends.
The 3GX includes the highest spec gyroscope sensors, allowing it to be utilized in the harshest conditions. The dual axis plus rudder sensing unit drastically enhances swashplate and rudder correction accuracy and will be felt when hovering, along with during aerobatic regimens.
Appropriate for 200 to 800 class helicopters, radiance engine or electrical powered.
The vibration resistant qualities are evident even when mounted with more difficult double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, along with entirely re-written firmware. The outcome is a remarkable improvement in stability that rivals a flybarred helicopter, while providing explosive dexterity.
With a built in pirouette compensation function, the 3GX has the ability to support the helicopter on a fixed point during pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly performed with accuracy.
Rudder control is similar to the luxury GP-780 gyro because the rudder sensitivity is optimized for the helicopter's rudder response qualities, allowing constant rudder feel even under high speed conditions. This excellent control feel will enable pilots of all ability levels to experience the best combination in between the 3GX and the helicopter.
Additional peripherals prepared for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system utilizes an overall of 10 sensors making sure positioning of the helicopter with superior precision and providing the ultimate service for aerial photography and other specialized applications.
Suitable with 2 to 5 blades rotor heads
Support approximately 6 servos
Automatic servo type recognition

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Diameter: 1350mm

Tail Rotor Diameter: 240mm

Engine Pinion Equipment: 20T

Main Drive Equipment: 170T

Autorotation Tail Drive Equipment: 180T

Drive Equipment Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V 

Consists of:

(1) T-REX 600N DFC Kit
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Requirement Servo
(1) DS655 Specialized Servo
(1) Governor Sensing unit


(1) B6T 2-in-1 Voltage Regulator

Needed To Total: 7-channel Helicopter Radio System (Minimum)


(1) Basic Throttle Servo


(1) Engine Beginner
(1) Digital Pitch Gauge
(1) Line up 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel