Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combination Helicopter Package. This amazing package includes not just the T-REX 600N DFC Package, however likewise a set of 600 3G Carbon Fiber blades, a governor sensor, a 2-1 voltage regulator, 3 DS615 standard servos, one DS655 specialized servo, and obviously the 3GX flybarless system. This incredibly combination kit offers you with an extraordinary helicopter kit and an equally impressive electronic devices package all in the very same box.

T-REX 600N DFC Functions: Geared up with the DFC flybarless head assembly, with very low CG style to reduce wind resistance, providing a more direct and exact flight control reaction and higher top speed.
Dual 3K carbon plate side frame style for ease of maintenance and resistance to torque caused flex.
Additional radial bearing is contributed to the top of the primary gear center to guarantee stable rotation, and remove jamming of one way bearing.
Upgraded stainless steel tail drive gear center mount, for more exact tail drive gear and higher tolerance.
High quality carbon rudder control rod assembly, utilizing 5mm carbon rod and metal ports, leading to enhanced rudder control precision.
Upgraded torque tube front and rear drive gear set, makes use of greatest spec and exceptional anti-wear product to increase the total strength and sturdiness. Effectively reduce gear striping and crash damage.
High quality tail transmission style, combined with double point mounted tail pitch control assembly to reduce slop and boost rudder control precision.
Uses high effective tail drive system.
High speed rated thrust bearing in tail blade grips.
High performance tail shaft drive style.
Highly effective lightened engine cooling fan, minimizing engine load and improving cooling performance.
Large diameter clutch system with unique installation method for good balance, very little vibration, and efficient power transfer.
Forward mounted rudder servo to safeguard it from exhaust contamination.
95mm tail blades for sharp rudder reaction and exceptional tail locking capability.
Unique H shaped cross section mounting platform for easy electronic mounting and defense.
Large capacity 440CC fuel tank for approximately 10 minutes of extreme 3D flights.
Starting and clutch assistance point makes use of 10mm one way bearing.
Ready to fly dry weight is just 3200g (7lbs).
Main fuel tank developed with fuel supply stabilization impact.
Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install and removal.
Created with concepts from large helicopter competitions, for the best static and vibrant flight efficiency.

3GX Characteristics:

Upgraded 3GX represents the next generation of multi function flybarless systems. The drastically enhanced efficiency will create an immediate effect on any enthusiasts.
The 3GX is currently the tiniest and lightest flybarless system on the marketplace and features two ports to straight link Spektrum and JR satellite receivers, together with complete assistance of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup procedure, the 3GX can be setup merely in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system currently on the marketplace consisting of 90, 120, 135, and 140 degree swashplates.
Graphically illustrated directions utilizing the computer system setup software application directs the user through an action by action setup procedure, allowing for quick setups without omitting any steps.
With the quickly to be launched Bluetooth connectivity kit, the 3GX can be programmed wirelessly from a PC. Ultimately there will likewise be smartphone apps enabling live changes to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 guv function, no external guv is needed, minimizing electronic clutter and excess wire.
A library of pre-configured 3GX settings are readily available for T-Rex series of helicopters, enabling pilots to accomplish the most ideal setup for their helicopter without the guesswork.
3 levels of flight mode are readily available to provide the ideal feel for beginner and advanced pilots.
Custom-made specifications have actually been established to permit pilots to fine tune various swashplate and rudder settings and a settings export function enables customized settings to be shared among friends.
The 3GX features the greatest spec gyroscope sensors, enabling it to be utilized in the harshest conditions. The double axis plus rudder sensor drastically enhances swashplate and rudder correction precision and will be felt when hovering, along with during aerobatic routines.
Suitable for 200 to 800 class helicopters, glow engine or electrical powered.
The vibration resistant attributes are evident even when mounted with harder double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, together with totally re-written firmware. The result is a remarkable improvement in stability that measures up to a flybarred helicopter, while providing explosive dexterity.
With a built in pirouette settlement function, the 3GX has the ability to support the helicopter on a set point during pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly carried out with precision.
Rudder control resembles the high end GP-780 gyro because the rudder level of sensitivity is optimized for the helicopter's rudder reaction attributes, enabling consistent rudder feel even under high speed conditions. This exceptional control feel will permit pilots of all skill levels to experience the ideal combination between the 3GX and the helicopter.
Additional peripherals prepared for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system makes use of a total of 10 sensors guaranteeing positioning of the helicopter with exceptional precision and providing the supreme solution for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type recognition

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Diameter: 1350mm

Tail Rotor Diameter: 240mm

Engine Pinion Gear: 20T

Main Drive Gear: 170T

Autorotation Tail Own Gear: 180T

Own Gear Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Range: -300~+300 degree

Z axis Operating Angle Range: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V 

Consists of:

(1) T-REX 600N DFC Package
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Standard Servo
(1) DS655 Specialized Servo
(1) Governor Sensor


(1) B6T 2-in-1 Voltage Regulator

Had to Complete: 7-channel Helicopter Radio System (Minimum)


(1) Standard Throttle Servo


(1) Engine Beginner
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel