Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combo Helicopter Set. This extraordinary package consists of not only the T-REX 600N DFC Set, however likewise a set of 600 3G Carbon Fiber blades, a governor sensing unit, a 2-1 voltage regulator, three DS615 basic servos, one DS655 specialized servo, and obviously the 3GX flybarless system. This incredibly combo kit supplies you with an incredible helicopter kit and an equally impressive electronic devices package all in the exact same box.

T-REX 600N DFC Features: Geared up with the DFC flybarless head assembly, with incredibly low CG style to reduce wind resistance, providing a more direct and accurate flight control reaction and greater top speed.
Double 3K carbon plate side frame style for ease of maintenance and resistance to torque induced flex.
Additional radial bearing is contributed to the top of the main gear center to guarantee steady rotation, and eliminate jamming of one method bearing.
Redesigned stainless steel tail drive gear center mount, for more accurate tail drive gear and greater tolerance.
High quality carbon rudder control rod assembly, utilizing 5mm carbon rod and metal ports, leading to improved rudder control precision.
Redesigned torque tube front and rear drive gear set, makes use of highest specification and exceptional anti-wear material to increase the total strength and sturdiness. Effectively reduce gear striping and crash damage.
High quality tail gearbox style, combined with dual point installed tail pitch control assembly to reduce slop and boost rudder control precision.
Makes use of high effective tail drive system.
High speed ranked thrust bearing in tail blade grips.
High performance tail shaft drive style.
Highly effective lightened engine cooling fan, minimizing engine load and enhancing cooling performance.
Large size clutch system with unique installation technique for great balance, minimal vibration, and reliable power transfer.
Forward installed rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder reaction and exceptional tail locking capability.
Distinct H formed random sample installing platform for simple electronic installing and security.
Large capability 440CC fuel tank for approximately 10 minutes of extreme 3D flights.
Starting and clutch support point makes use of 10mm one method bearing.
Prepared to fly dry weight is only 3200g (7lbs).
Main fuel tank developed with fuel supply stabilization impact.
Effect resistant fiberglass canopy with 3 point hook installing system for ease of install and elimination.
Created with concepts from big helicopter competitors, for the very best static and vibrant flight performance.

3GX Features:

Redesigned 3GX represents the next generation of multi function flybarless systems. The significantly improved performance will produce an immediate impact on any enthusiasts.
The 3GX is currently the smallest and lightest flybarless system on the market and includes two ports to directly link Spektrum and JR satellite receivers, along with full support of Futaba's S-BUS system.
Using the 3G FL760 manual setup procedure, the 3GX can be setup simply in a matter of minutes. Furthermore, the 3GX can support any CCPM swashplate system currently on the market consisting of 90, 120, 135, and 140 degree swashplates.
Graphically illustrated guidelines utilizing the computer system setup software directs the user through a step by step setup procedure, permitting quick setups without leaving out any steps.
With the quickly to be released Bluetooth connectivity kit, the 3GX can be configured wirelessly from a PC. Ultimately there will likewise be smartphone apps enabling live modifications to the 3GX without powering down.
With 3GX's built in Align RCE-G600 guv function, no external guv is needed, minimizing electronic mess and excess wire.
A library of pre-configured 3GX settings are offered for T-Rex series of helicopters, enabling pilots to attain the most optimal setup for their helicopter without the guesswork.
Three levels of flight mode are offered to supply the best feel for novice and advanced pilots.
Custom-made parameters have actually been established to enable pilots to fine tune numerous swashplate and rudder settings and a settings export feature enables custom-made settings to be shared amongst friends.
The 3GX includes the highest spec gyroscope sensors, enabling it to be used in the harshest conditions. The dual axis plus rudder sensing unit significantly improves swashplate and rudder correction precision and will be felt when hovering, as well as throughout aerobatic routines.
Suitable for 200 to 800 class helicopters, glow engine or electrical powered.
The vibration resistant characteristics appear even when installed with more difficult double sided installing tape.
16 bit processor is 4 times faster than the previous 3G, along with totally re-written firmware. The result is a dramatic enhancement in stability that equals a flybarred helicopter, while providing explosive dexterity.
With a built in pirouette compensation function, the 3GX has the ability to stabilize the helicopter on a set point throughout pirouetting maneuvers. Pirouetting flip type of maneuvers are easily carried out with precision.
Rudder control is similar to the luxury GP-780 gyro because the rudder level of sensitivity is enhanced for the helicopter's rudder reaction characteristics, enabling consistent rudder feel even under high speed conditions. This exceptional control feel will enable pilots of all ability levels to experience the best integration in between the 3GX and the helicopter.
Additional peripherals planned for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system makes use of an overall of 10 sensors guaranteeing positioning of the helicopter with exceptional precision and providing the supreme option for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type acknowledgment

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Diameter: 1350mm

Tail Rotor Diameter: 240mm

Engine Pinion Equipment: 20T

Main Drive Equipment: 170T

Autorotation Tail Drive Equipment: 180T

Drive Equipment Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Running Temperature level: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Optimum working voltage: 8.5V 

Consists of:

(1) T-REX 600N DFC Set
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Standard Servo
(1) DS655 Specialized Servo
(1) Governor Sensing unit


(1) B6T 2-in-1 Voltage Regulator

Had to Total: 7-channel Helicopter Radio System (Minimum)


(1) Basic Throttle Servo


(1) Engine Beginner
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel