Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combination Helicopter Set. This amazing bundle includes not only the T-REX 600N DFC Set, however likewise a set of 600 3G Carbon Fiber blades, a governor sensor, a 2-1 voltage regulator, 3 DS615 basic servos, one DS655 specialized servo, and obviously the 3GX flybarless system. This incredibly combination kit provides you with an extraordinary helicopter kit and a similarly remarkable electronic devices bundle all in the exact same box.

T-REX 600N DFC Functions: Equipped with the DFC flybarless head assembly, with extremely low CG style to minimize wind resistance, supplying a more direct and accurate flight control response and greater leading speed.
Double 3K carbon plate side frame style for ease of maintenance and resistance to torque induced flex.
Extra radial bearing is contributed to the top of the primary equipment hub to guarantee stable rotation, and eliminate jamming of one method bearing.
Revamped stainless steel tail drive equipment center mount, for more accurate tail drive equipment and greater tolerance.
High quality carbon rudder control rod assembly, using 5mm carbon rod and metal connectors, resulting in improved rudder control precision.
Revamped torque tube front and rear drive equipment set, makes use of highest specification and exceptional anti-wear material to increase the general strength and durability. Successfully minimize equipment striping and crash damage.
High quality tail transmission style, combined with double point mounted tail pitch control assembly to minimize slop and boost rudder control precision.
Uses high efficient tail drive system.
High speed ranked thrust bearing in tail blade grips.
High performance tail shaft drive style.
Extremely efficient lightened engine cooling fan, decreasing engine load and enhancing cooling performance.
Big size clutch system with unique setup approach for great balance, minimal vibration, and effective power transfer.
Forward mounted rudder servo to secure it from exhaust contamination.
95mm tail blades for sharp rudder response and excellent tail locking ability.
Distinct H shaped sample mounting platform for simple electronic mounting and protection.
Big capability 440CC fuel tank for up to 10 minutes of extreme 3D flights.
Starting and clutch support point makes use of 10mm one method bearing.
Prepared to fly dry weight is only 3200g (7lbs).
Main fuel tank developed with fuel supply stabilization effect.
Impact resistant fiberglass canopy with 3 point hook mounting system for ease of set up and removal.
Created with principles from large helicopter competitors, for the very best static and vibrant flight efficiency.

3GX Features:

Revamped 3GX represents the next generation of multi function flybarless systems. The dramatically improved efficiency will create an immediate impact on any enthusiasts.
The 3GX is presently the tiniest and lightest flybarless system on the market and includes two ports to directly link Spektrum and JR satellite receivers, in addition to complete support of Futaba's S-BUS system.
Using the 3G FL760 manual setup process, the 3GX can be setup merely in a matter of minutes. In addition, the 3GX can support any CCPM swashplate system presently on the market consisting of 90, 120, 135, and 140 degree swashplates.
Graphically illustrated guidelines using the computer setup software directs the user through a step by action setup process, enabling quick setups without omitting any actions.
With the quickly to be launched Bluetooth connectivity kit, the 3GX can be configured wirelessly from a PC. Ultimately there will likewise be smartphone apps enabling live modifications to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is required, decreasing electronic clutter and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, enabling pilots to achieve the most optimum setup for their helicopter without the uncertainty.
Three levels of flight mode are available to supply the perfect feel for beginner and advanced pilots.
Customized parameters have actually been established to enable pilots to fine tune many swashplate and rudder settings and a settings export function permits custom settings to be shared among friends.
The 3GX includes the highest spec gyroscope sensors, enabling it to be utilized in the harshest conditions. The double axis plus rudder sensor dramatically improves swashplate and rudder correction precision and will be felt when hovering, as well as during aerobatic routines.
Ideal for 200 to 800 class helicopters, radiance engine or electrical powered.
The vibration resistant characteristics are evident even when mounted with more difficult double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, in addition to completely re-written firmware. The result is a remarkable enhancement in stability that equals a flybarred helicopter, while supplying explosive dexterity.
With a built in pirouette settlement function, the 3GX has the ability to support the helicopter on a set point during pirouetting maneuvers. Pirouetting flip type of maneuvers are quickly performed with precision.
Rudder control is similar to the luxury GP-780 gyro in that the rudder level of sensitivity is optimized for the helicopter's rudder response characteristics, enabling constant rudder feel even under high speed conditions. This excellent control feel will enable pilots of all ability levels to experience the perfect combination between the 3GX and the helicopter.
Extra peripherals planned for the 3GX consist of a 3-axis accelerometer, 3-axis magnetic compass, and a GPS positioning system.
The position hold gyro system makes use of an overall of 10 sensors guaranteeing positioning of the helicopter with exceptional accuracy and supplying the ultimate service for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance up to 6 servos
Automatic servo type recognition

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Size: 1350mm

Tail Rotor Size: 240mm

Engine Pinion Gear: 20T

Main Drive Gear: 170T

Autorotation Tail Own Gear: 180T

Own Gear Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Operating Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Optimum working voltage: 8.5V 

Includes:

(1) T-REX 600N DFC Set
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Standard Servo
(1) DS655 Specialized Servo
(1) Governor Sensor


(1) B6T 2-in-1 Voltage Regulator

Had to Total: 7-channel Helicopter Radio System (Minimum)


(1) Basic Throttle Servo


(1) Engine Starter
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel