Align T-REX 600N DFC Super Combo Helicopter Kit w/4 Servos, 3GX Gyro

This is the Align T-REX 600 Nitro DFC Super Combo Helicopter Kit. This extraordinary package includes not just the T-REX 600N DFC Kit, but likewise a set of 600 3G Carbon Fiber blades, a governor sensor, a 2-1 voltage regulator, three DS615 basic servos, one DS655 specialized servo, and naturally the 3GX flybarless system. This incredibly combo package supplies you with an incredible helicopter package and an equally remarkable electronics package all in the very same box.

T-REX 600N DFC Functions: Geared up with the DFC flybarless head assembly, with incredibly low CG style to lessen wind resistance, offering a more direct and exact flight control response and greater leading speed.
Double 3K carbon plate side frame style for ease of upkeep and resistance to torque induced flex.
Extra radial bearing is contributed to the top of the main equipment hub to make sure stable rotation, and get rid of jamming of one way bearing.
Redesigned stainless steel tail drive equipment center install, for more exact tail drive equipment and greater tolerance.
High quality carbon rudder control rod assembly, utilizing 5mm carbon rod and metal ports, leading to improved rudder control accuracy.
Redesigned torque tube front and rear drive equipment set, uses greatest spec and exceptional anti-wear material to increase the total strength and resilience. Efficiently lessen equipment striping and crash damage.
High quality tail transmission style, integrated with double point installed tail pitch control assembly to lessen slop and boost rudder control accuracy.
Utilizes high effective tail drive system.
High speed rated thrust bearing in tail blade grips.
High effectiveness tail shaft drive style.
Highly effective lightened engine cooling fan, minimizing engine load and improving cooling effectiveness.
Big size clutch system with special setup method for great balance, very little vibration, and reliable power transfer.
Forward installed rudder servo to safeguard it from exhaust contamination.
95mm tail blades for sharp rudder response and outstanding tail locking capability.
Unique H shaped random sample mounting platform for easy electronic mounting and security.
Big capability 440CC fuel tank for approximately 10 minutes of extreme 3D flights.
Starting and clutch assistance point uses 10mm one way bearing.
All set to fly dry weight is just 3200g (7lbs).
Main fuel tank developed with fuel supply stabilization result.
Effect resistant fiberglass canopy with 3 point hook mounting system for ease of install and removal.
Created with ideas from large helicopter competitions, for the best static and vibrant flight efficiency.

3GX Features:

Redesigned 3GX represents the next generation of multi function flybarless systems. The considerably improved efficiency will create an immediate influence on any enthusiasts.
The 3GX is presently the smallest and lightest flybarless system on the market and features 2 ports to straight link Spektrum and JR satellite receivers, along with complete assistance of Futaba's S-BUS system.
Utilizing the 3G FL760 manual setup procedure, the 3GX can be setup merely in a matter of minutes. Additionally, the 3GX can support any CCPM swashplate system presently on the market consisting of 90, 120, 135, and 140 degree swashplates.
Graphically illustrated instructions utilizing the computer setup software application directs the user through an action by action setup procedure, permitting quick setups without omitting any steps.
With the soon to be released Bluetooth connectivity package, the 3GX can be set wirelessly from a PC. Eventually there will likewise be smartphone apps permitting live changes to the 3GX without powering down.
With 3GX's integrated in Align RCE-G600 governor function, no external governor is required, minimizing electronic clutter and excess wire.
A library of pre-configured 3GX settings are available for T-Rex series of helicopters, permitting pilots to accomplish the most ideal setup for their helicopter without the guesswork.
Three levels of flight mode are available to supply the best feel for novice and advanced pilots.
Customized parameters have actually been established to allow pilots to fine tune numerous swashplate and rudder settings and a settings export function enables custom-made settings to be shared amongst pals.
The 3GX features the greatest spec gyroscope sensors, permitting it to be utilized in the harshest conditions. The double axis plus rudder sensor considerably enhances swashplate and rudder correction accuracy and will be felt when hovering, in addition to during aerobatic routines.
Suitable for 200 to 800 class helicopters, radiance engine or electrical powered.
The vibration resistant attributes are evident even when installed with harder double sided mounting tape.
16 bit processor is 4 times faster than the previous 3G, along with totally re-written firmware. The result is a significant improvement in stability that rivals a flybarred helicopter, while offering explosive agility.
With a built in pirouette compensation function, the 3GX has the ability to stabilize the helicopter on a set point during pirouetting maneuvers. Pirouetting flip kind of maneuvers are quickly carried out with accuracy.
Rudder control is similar to the luxury GP-780 gyro because the rudder sensitivity is enhanced for the helicopter's rudder response attributes, permitting consistent rudder feel even under high speed conditions. This outstanding control feel will allow pilots of all ability levels to experience the best integration between the 3GX and the helicopter.
Extra peripherals prepared for the 3GX include a 3-axis accelerometer, 3-axis magnetic compass, and a GPS placing system.
The position hold gyro system uses an overall of 10 sensors guaranteeing positioning of the helicopter with exceptional accuracy and offering the ultimate solution for aerial photography and other specialized applications.
Compatible with 2 to 5 blades rotor heads
Assistance approximately 6 servos
Automatic servo type acknowledgment

T-REX 600N DFC Specifications:

Length: 1160mm

Height: 357mm

Main Blade Length: 600mm

Main Rotor Diameter: 1350mm

Tail Rotor Diameter: 240mm

Engine Pinion Equipment: 20T

Main Drive Equipment: 170T

Autorotation Tail Drive Equipment: 180T

Drive Equipment Ratio: 8.5:1:4.5 (E:M:T)

Flying Weight: ~3200g

3GX Specifications:

Running Temperature: -10~60 degree

X and Y axis Operating Angle Variety: -300~+300 degree

Z axis Operating Angle Variety: -600~+600 degree

Size: 36.5x25.2x15.6mm Size

Weight: 11g

Maximum working voltage: 8.5V 

Includes:

(1) T-REX 600N DFC Kit
(1) 600 3G Carbon Fiber Blade Set
(1) 3GX Flybarless system
(3) DS615 Requirement Servo
(1) DS655 Specialized Servo
(1) Guv Sensing unit


(1) B6T 2-in-1 Voltage Regulator

Had to Complete: 7-channel Helicopter Radio System (Minimum)


(1) Basic Throttle Servo


(1) Engine Beginner
(1) Digital Pitch Gauge
(1) Align 50H Engine or 55HP Engine
(1) 50 size Muffler
(1) Fuel Pump
Engine Fuel